How to do the weak current decoration of the villa, and what to pay attention to in the weak current

Pay attention to protection when decorating weak current in the villa, **line, network cable, **line and other weak current items, first of all, we must protect the entrance line and socket panel, it is best to close it in advance. The pipeline should be changed from the inlet interface wiring box, and the inlet line must not be cut off, otherwise it will be very difficult to recover.

Before the decoration of the villa, it is necessary to consider the installation location of various weak current sockets in advance, according to the current living habits of people, it is best to leave weak current sockets in the main functional rooms (such as living rooms, bedrooms, etc.), and the bathroom must consider the best sockets to facilitate future life. As for the building intercom system, it is best to ask the property department to remove it in advance when the villa is decorated, and then reinstall it after completion.

It should be noted that all weak wires must be laid through pipes, and it is best to keep a distance of more than 300 between weak current pipelines and sockets and strong current pipelines and sockets to avoid the interference of strong current to weak current. When the villa decoration project is accepted, the waterway should be tested for pressure, and the water pressure should be maintained for one hour without losing pressure to be qualified. The socket should be checked one by one with a phase checker to prevent wiring errors, and the common phenomenon is that the phase zero is wrong or no grounding wire, which is very dangerous in future life.

In addition, it is necessary to test the leakage protection switch to see whether its action is sensitive, you can ask the professional inspectors of the villa decoration company to check, or you can ask the property department to check for your acceptance, but you had better be present during the inspection and make a record.

It is recommended to find a professional understanding for decoration. This ensures that it works well.

01 Specification materials.

The standard wire should be a turn of complete packaging, and the more commonly used wire pipe is flame retardant vinyl chloride or low-smoke halogen-free structure of environmentally friendly wire. Anti-aging, strong corrosion resistance, acid and alkali resistance, superior heat dissipation performance, and effectively ensure the safety of electricity.

02 Pipeline fixation.

The ground line pipe is fixed with a galvanized pipe clamp, the distance between the distribution pipe clamp is equal, the scientific calculation, the careful arrangement of the pipe, the distribution is uniform, which is not only very firm, will not be touched off the line pipe due to the later construction, to ensure the quality of the circuit, and the later leveling, plastering or brick paving, cement mortar can contact with the wall and ground through the gap, will not be hollow, and can withstand the time of grinding.

03 Weak current shielding.

Separation of strong and weak electricity, to avoid interference, strong and weak electricity, parallel arrangement and weak wire pipe first wrapped shielding film, and then tightly wound the protective belt outside, so that you can effectively avoid signal interference caused by magnetic field, resulting in noise and blurred images when you knock out the phone, watch TV, ground wiring, when the strong and weak electricity cross, the strong current is under the weak current on the top; The top surface wiring, when the strong and weak electricity cross, the strong current is on the top and the weak current is on the bottom, so that not only the weak current signal will not be interfered with, but also the shielding film is very durable.

1. Be sure to thread the wire, so that one is to protect the wire body, and the other is to be free to pull out and wear it when it is necessary to change the line;

2. It is best to take a weak current control box alone with many types of functions, so that there can be a total operation.

3. Because the current development of good TV has the function of network TV, it is best for cable TV and network cable to be in parallel in a group, that is, where there is cable TV, there should be a network exit.

4. Leave as many sockets as possible;

5. The strong current of the lamp wire and the socket should be divided into boxes with the weak current, and the lamp and the socket should be completely isolated from each other, so as to avoid the use of socket wires for some lamps, which are not easy to distinguish when installing lamps and changing bulbs.

6. The air conditioning socket is a separate road, and the line should be thicker, and the decorator knows the specifications 7. The lamp must be considered in advance, whether dual control is required, and small lamps such as mirror headlights cannot be pulled down.