-
When decorating, the shower room must be used as a protective space, and every family will make some partitions in the shower room, most of which are made of glass. Basically, the shower room has to be filmed, and the purpose of this is, of course, to be private. After all, the bathroom is a very private place, and most of them will use glass as a partition, because wood cannot withstand the long-term turbidity of water.
Most people will also choose tempered glass, because tempered glass has much greater safety performance in installation. <>
Glass is safe, but when choosing the material, it is still necessary to choose according to the practicality, first tempered glass.
Be sure to choose an explosion-proof one or choose an explosion-proof film.
Or a frosted film, which can play a safe role. When installing, you can rest assured that the quality of many tempered glass is very unqualified, because it is very cheap, but this quality is still very high in the market. If the tempered glass is violent, it is also very dangerous, or there are many inadequate places in the transportation will also bump and cause self-explosion.
The world's problem is easy for tempered glass, and this incident is actually a problem faced by many people in the world, and there is no solution at present. In order to cause this kind of safety accident, usually the tempered glass in the bathroom needs to be pasted with an explosion-proof film, which can actually be done for a few dollars on the market. The price is very low, but it is very effective, it can also protect your privacy, and again it will ensure the beauty of the bathroom, and most of the shower rooms will be filmed.
Safety IssuesIf the temperature in the bathroom is basically kept at room temperature, it is also very safe, and the shower room usually needs to be ventilated. Under normal circumstances, it is very dangerous when the glass film is vaporized or the exhaust is not smooth. However, when applying the film, it is still necessary to find a very professional person to paste the porcelain film, which can ensure safety and improve the hardness of the glass.
-
Because the shower room will have steam when it is hot, it is necessary to apply a film. The purpose of this is to prevent steam from happening, so that the bathroom does not look so blurry.
-
In order to facilitate cleaning, it can play the role of waterproof and anti-fouling, and can also protect the human body from being injured by sharp objects, and can also form a protective film on the surface of glass and walls, which can play a role in protecting glass and walls.
-
Because this is to isolate the outside world from prying eyes in the shower room, and in this case, there will not be a lot of water vapor in the shower room, which is easier to clean.
-
It is because of the protection of privacy, and the purpose of this is also to protect their privacy, so the bathing room will be covered with film.
-
Because I am afraid that the glass will be broken, for the sake of safety, in order not to hurt people, if the glass is broken, if it is not filmed, it may be pierced to people's bodies.
-
This is to protect the privacy of consumers, we can't let others see when we take a bath, except for our own relatives, almost all shower rooms will be covered with film.
-
The influence of glass quality defects, such as magazines in the glass, or defects on the glass surface caused by improper operation during processing, such as scratches, explosions, deep explosion edges, etc., will lead to the self-explosion of tempered glass, and there are other reasons, such as uneven and asymmetrical temperature gradient along the glass thickness direction during heating or cooling. The tempered products have a tendency to self-detonate, and the explosion-proof film is used, which can enhance the strength of the tempered glass, and at the same time, when the tempered glass self-detonates, the film will firmly paste the broken tempered glass fragments together, and will not let the fragments splash out, causing secondary damage to people. In order to reduce the risk, it is recommended that you still put an explosion-proof film on the shower room at home, which is not very expensive.
-
At present, there are two kinds of glass used for shower rooms on the market: ordinary glass and tempered glass. In contrast, the latter is more widely used due to its higher safety factor. However, the glass itself is a fragile product, even if it is a qualified product, there is a certain risk, and there is a saying in the industry that "tempered glass 3 self-explosion rate".
Therefore, in order to ensure safety, the shower room must be filmed.
-
It is not good to use glass film in the shower room, because the shower room has high water vapor and high humidity, and the film will warp and fall off. If you don't want a visually transparent shower room, you can customize a silk or frosted glass shower room.
-
No way! At home, or in the bathroom, it shouldn't matter if you put the film on it or not. However, the film has the advantage of reducing the splash of broken glass in case it breaks.
-
Tempered glass is not necessary. The film is nothing more than to ensure the integrity of the glass and not to hurt people. However, the glass of the shower room is made of steel, which will not hurt people, and the possibility of damage is also very small.
This is a high-end glass in China.
-
I heard that the shower room will be **???
I heard that a young couple went out to open a room and were injured by the glass of the shower room???
How can I pre-shower the bath room**ah???
Is the shower room film useful???
Home decoration and shower room need to be pasted with explosion-proof film has always been a controversial topic.
In the past two years, there have been endless problems about the self-explosion of the shower room, and some people have artificially created this intimidation marketing for the shower room brand.
There are also people who believe that these are real beings in real life.
pageMy shower room has been used for more than ten years, and it has not exploded.
The tempered glass in the shower room has a self-explosion rate of 3 per 1,000, which does not mean that the one we buy will explode, this is just a matter of probability.
But don't believe that the so-called my home is a big brand My home is dressed up as a lot of tempered glass, it will definitely not be bad, and my home is tempered glass will definitely not hurt after it is broken.
Person. There are too many beautiful lies in life, and it is necessary to believe that everything is not absolutely 100%, and there is actually a story behind the story.
From a professional point of view, no matter how big the shower room is, how good the technology is, and how expensive it is, there is a problem of self-explosion rate, which is an incurable disease that has not been solved in China's technology at present.
There is really such a confident business, you let him smash a piece of glass on the spot to see if it hurts people.
ps This ** is from the home of a leader in Shanghai who indicates TV shopping. At the beginning, I didn't believe that the glass would explode by itself, but fortunately, the self-eruption was during the day, and the children at home were playing outside).
pageIt is safe to apply the film, but it is too difficult to take care of, and it is still not pasted if you think about the water stains in the back.
The film is generally attached to the outside of the shower room, and the inner part is actually not pasted, usually when everyone takes a bath, as long as the water rinses off the foam on it.
If you need to clean it for a long time, you can spray it with glass water, scrub it with a soft towel, and rinse it.
If you have not taken care of it for a long time, resulting in serious water stains on it, you can use white vinegar 1:3 warm water to scrub it.
Economical and affordable. No special maintenance is required, and it is important to remember that the shower room with the film should not be scrubbed with hard things to prevent the film from scratching.
PAGE3 Which is better, manual film or machine film?
There are many brands on the market that some are machine films, and some are waiting until the shower room is installed to send a master to come to the door to apply the film.
If you can, try to choose the machine lamination when it leaves the factory. Because the master does not have a clear measurement standard for manual filming, and the dust on it cannot be completely clear after the shower room is installed, it will inevitably lead to blistering and warping of the film.
Hardcover real estate relatives suggest that even if it is handmade, it is safer to paste.
-
The current glass tempering process cannot achieve 100% explosion-proof. It is generally recommended to apply a film. Although tempered glass is not easy to break glass, but after all, there is no safety prevention, when the glass once for what reason it explodes, the consequences are difficult to say.
Especially when such a horrific thing happens in the middle of a bath, it is even more dangerous.
-
If you can, it's best to apply the film. Because no matter how good the quality of the tempered glass in the shower room is, there is a risk of self-explosion, and when the film is pasted, the glass fragments will not splash around, and will adhere to the explosion-proof film to reduce the damage to people. Recently, I heard that Kaili shower room May Day ** sent explosion-proof film, go and take a look.
-
The shower room must be filmed, this is to prevent the tempered glass from exploding, if there is an explosion-proof film, then the glass fragments will stick to the explosion-proof film and will not splash around.
Explosion-proof film is a metal film installed on the upper part of the pressure vessel to prevent the container**, which is a safety device. Also known as explosion-proof disc or rupture disc. When the pressure in the container exceeds a certain limit, the film is broken first, so the pressure in the container can be reduced and avoided.
It is widely used in pressure vessels.
-
The shower room is covered with a film to prevent self-explosion. The film does not prevent 100% self-explosion, but only reduces damage. There are two methods that are commonly used nowadays:
One is the film, which is what many small manufacturers call explosion-proof film. One is laminated tempered glass, which is glued inside two layers of glass.
Moreover, there is water in the shower room, and the film will deteriorate and rot after a long time in a humid environment. You have to repost it again, it costs money, and it doesn't look good. It will also affect the brand image after two years.
Therefore, if you want to be a big shower room manufacturer, Leboton shower room, Deli shower room, Furui shower room, ideal shower room, etc. do not do film, only laminated glass, you can go to the market to know.
-
Safety and explosion-proof function.
Architectural membrane: It has explosion-proof function to prevent personal injury caused by natural breakage of ordinary glass and tempered glass, and protect the safety of you and your family. (Australian researchers followed the curtain walls of eight buildings for 12 years.)
In a total of 17,760 pieces of tempered glass, a total of 306 cases of self-explosion occurred, and the self-explosion rate was . )。Glass that scatters in a burst is often the first injury to the human body when an accident occurs.
There have also been many cases of self-explosion of shower room glass due to heat.
Northern Lights Architectural Film is here to help!!
-
There are many cases of self-explosion of shower room glass due to heat, and the film can prevent human injury caused by the glass being broken and splashed by heat. The film allows the glass that bursts in an accident to stick tightly together and stay in place, thereby reducing the damage to the human body. Hebei Jiateng.
First of all, the shower room is a completely sealed space, and the water vapor produced during the shower. >>>More
The quality of the main material glass of the shower room is very critical, ordinary glass can not be used to make a shower room, tempered glass must be used, and the following four aspects must be followed: 1. There is a 3C certification mark, and it is better to print it directly on the glass with a laser; 2. The thickness of tempered glass is 4mm, 6mm, 8mm, 10mm and other specifications, generally 6mm and 8mm can be used; 3. Check whether the edge of the glass is damaged, whether the chamfering edge is smooth, and the probability of self-explosion after the installation of the problematic product will be much greater; Fourth, no matter how good the shower room is, there will be a self-explosion rate of 3/1000, so it is best to paste a layer of explosion-proof film on the glass, even if there is a real problem, the glass fragments will only adhere to the film and will not splash and hurt people; Now in addition to ordinary tempered glass, there are many businesses that have launched tempered glass or laminated glass with CCCS certification, which will be more expensive than ordinary tempered glass, and the product itself has explosion-proof function. >>>More
Because the glass material looks bright, it can make the overall bathroom look more spacious. And the glass is dirty and easy to clean, just rinse with water and wipe it with a cloth.
Marble is generally better for the water retaining strip in the shower room. Water retaining strip: It is used under the bathroom shower to intercept the water from the shower overflowing out of the shower, mainly to facilitate cleaning the toilet floor. >>>More
Its function is mainly to block ultraviolet rays, block part of the heat and prevent the occurrence of injuries and anti-glare caused by glass splashing, and at the same time, according to the one-way perspective performance of the solar film, to achieve the purpose of protecting personal privacy. >>>More