If you want to install energy saving system doors and windows, what problems need to be paid attenti

It is necessary to pay attention to its performance, ** and health index and safety factor, which are closely related to the quality of energy-saving system doors and windows, if these conditions are not up to standard, it means that its quality is not ideal, not suitable for purchase and installation, there will be some problems after blind installation, can not achieve the expected energy-saving effect, there will be certain safety hazards.

Pay attention to the performance of doors and windows

When you want to install energy-saving system doors and windows, you must understand the performance of this energy-saving system doors and windows, to see if it is really energy-saving, whether there is a better thermal insulation, heat preservation ability, but also to see what kind of materials are used, whether it is green and environmentally friendly, only to meet these conditions of energy-saving system, doors and windows can prevent heat from entering the room in summer, reduce the use of air conditioning, in order to prevent the heat from running out in winter, but also to reduce the cost of heating, can achieve the energy-saving effect that people want.

Pay attention to the health index of doors and windows

When installing energy-saving system doors and windows, we should also pay attention to its health index, because now the environmental pollution in the society is getting heavier and heavier, regardless of water pollution and air pollution and noise pollution, people's bodies are often harmed by these pollution, they choose to install energy-saving system doors and windows, is to make the indoor environment better, can prevent these pollution from entering the room, so to see whether the health index of doors and windows can meet the specific requirements of air purification and noise isolation, and whether it can provide people with a healthy living environment.

Pay attention to the safety factor of doors and windows

When installing energy-saving system doors and windows, we should also pay attention to its safety factor, because the current energy-saving system doors and windows are often in a ventilated state, and when it is in a ventilated state, whether it can prevent thieves from entering, prevent children from turning out of the window, only the safety guarantee is worthy of people to install energy-saving doors and windows, in addition, the quality of energy-saving system doors and windows is also very important, if the quality is not in shape, it will affect its service life, and the energy-saving effect will be significantly worse after a long time.

Energy-saving system doors and windows are a new type of doors and windows, which can meet people's various needs for doors and windows, but before installation, we should also pay attention to these problems introduced above, only in this way can we install energy-saving system doors and windows that are really energy-saving, and will make the indoor living environment more suitable and pleasant.

It should be noted that before installation, we must consider the size of the problem, to meet the installation standards, when choosing, you can choose some good quality, we must pay attention to the protective measures, and the installation is more reliable.

First of all, we must pay attention to the right size, we must choose some cost-effective, and we must pay attention to energy saving, and then we must also pay attention to physical health, and the most important thing is safety, we must do a good job of prevention.

It is necessary to pay attention to the selection and design of profiles, the material of glass, and the selection of accessories, only in this way can the installation of energy-saving system doors and windows achieve real energy saving, if you do not pay attention, it will affect the energy-saving effect of doors and windows, and there may be poor thermal insulation performance and poor sound insulation effect.

Pay attention to the choice of profiles

If you want to install energy-saving system doors and windows, you must choose the right form, because the first ordinary aluminum alloy profile on the market is a kind of thermal conductivity is relatively large, and the heat conduction is very fast, this profile is not suitable for making energy-saving system doors and windows, and the doors and windows made of this profile are prone to frost and dripping in winter. The selection of profiles is also to pay attention to its sealing, and to pay attention to the design of the profile, it is best to design it as casement doors and windows, so as to ensure that after the installation of doors and windows, the energy-saving effect is better.

Pay attention to the choice of glass

Glass is an important part of the energy-saving system doors and windows, but the glass has a variety of different models and thicknesses, the selection of different performance of the glass will directly affect the energy-saving performance of the doors and windows, the energy-saving effect is good must choose the heat transfer coefficient and the shading coefficient are more suitable glass, especially in the southern region when choosing glass, to pay attention to its thermal radiation, energy loss should also pay attention to its thermal insulation performance, after the selection of the right glass installation, will make the system energy-saving doors and windows energy-saving effect twice the result with half the effort.

Pay attention to the choice of accessories

Accessories are also an important part of the system energy-saving doors and windows, they also have a very important position, play a vital role and the system energy-saving doors and windows of the water tightness and wind pressure resistance and air sealing are closely related, the quality of accessories is directly related to the safety of doors and windows, so in the selection of accessories must choose good quality and excellent quality accessories, can not choose those poor material hardware accessories, such hardware accessories are easy to age after installation and use, fragmentation will affect the normal use of energy-saving doors and windows.

First of all, it is necessary to determine the length, width and height in advance, and then we should also pay attention to energy conservation and environmental protection, we should also pay attention to pressure, and we should also pay attention to sealing and safety.

What needs to be paid attention to should be a health index and safety issues, and if you want to get the doors and windows of this energy-saving system, you must need all aspects of the conditions to meet the standards.

It is necessary to pay attention to the installation skills, and Xifu should also pay attention to the installation of accessories, pay attention to the choice of materials, pay attention to the performance of Huailuzheng, and check in advance to measure the corresponding size. Lead repentance.

If you want to install energy-saving system doors and windows, you need to pay attention to a lot of problems, when you buy energy-saving system doors and windows, you should be optimistic about the indicators of energy-saving system doors and windows, and at the same time, you should also tease to see whether it conforms to the structure of doors and windows at home and barricades. When installing this Hu, it is necessary to see whether it is suitable for the use of doors and windows at home, and at the same time, it is also necessary to pay attention to the safety of electricity and so on.

When installing energy-saving system doors and windows, be sure to choose a regular company. The number one factor in installing windows and doors is safety. Therefore, there should be multiple guarantees for quick return. to protect the safety of their own sails and property.

Glass, door and window sound insulation mostly depends on the glass, whether it is laminated insulating glass, insulating glass or general glass; There is also the thickness of the glass and the thickness of the hollow sealant, the quality of the glass glue, determines the airtightness and airtightness of the doors and windows, and also determines the energy saving of the doors and windows must depend on the tightness of the windows.

Because the thermal conductivity of aluminum alloy profiles is very large, the heat conduction is very fast, especially in the cold areas of the north, and frost, dew, ice and water flow occur in the winter room. In the south, the phenomenon is only invisible to the naked eye, but it consumes a lot of energy for air conditioning. Performance of hardware accessories: Hardware accessories occupy a very important position in the systematic design of energy-saving doors and windows.

The quality of hardware accessories directly affects the performance indicators of doors and windows. The repeated opening of doors and windows is realized by hardware accessories.

Think of an energy-saving solution, that is, double-layer glass, this double-layer glass is a horizontal imitation of the hot water bottle, the principle of thermos cup, the air is not so fast heat transfer, but it is a pity that it, it is not as good as a thermos flask to vacuum the double-layer, that is called real energy saving. Energy-saving doors and windows have five core functions: good sound insulation and noise reduction; Good thermal insulation, thickened material; Good air tightness, away from haze; Good water tightness, no leakage; High light transmittance, good heat preservation, and isolation of cold and heat.

The specific performance of the so-called energy saving is to save electricity, in summer, other people's home refrigeration, air conditioning to open 24 degrees, your window sealing is good, good heat insulation, air conditioning is turned on 28 degrees, in the long run, saving electricity costs considerably. First, the material of doors and windows.

2. Glass. Third, the energy saving of doors and windows is the overall energy saving. All in all, the energy saving of doors and windows depends not only on the material, but also on the glass, but also on the craftsmanship of the doors and windows.

Energy-saving system doors and windows are stronger than ordinary doors and windows waterproof, moisture-proof and sound insulation, energy-saving system doors and windows installation methods are mainly divided into two categories, dry installation and wet installation. Dry installation is done after the interior and exterior decoration is completed before the wall is installed, while wet installation of window frames must be put on the wall before the wall is wet.

If we want to install energy-saving system doors and windows, we can choose some high-quality ones, and then measure the size of our own for customization, and then ask professional personnel to install them.

1.The so-called real energy-saving system doors and windows are not a single energy-saving material made of thermal insulation bridge aluminum profile or low-e insulating glass, but the perfect combination of the system, and the comprehensive result of the performance of each link is indispensable. Heat conductivity is the transfer of heat caused by the molecular movement of materials used in doors and windows, from one surface of the material to another, causing heat loss.

Thermal radiation mainly travels directly in the form of rays, causing energy loss. The sliding window slides back and forth on the slide rail, the top space is large, there is a gap between the bottom pulleys, and the window sash forms an obvious convection exchange up and down, so it cannot be called an energy-saving window.

2.Casement windows, casement windows and window frames are sealed with good tape. When the casement window is closed, the sealant strip is pressed so tightly that there are almost no gaps, making it difficult to form convection, and there is almost no convection in the fixed window.

Therefore, doors and windows dominated by casement windows and fixed windows can be called energy-saving doors and windows. The glass area of doors and windows generally accounts for more than 70%. The heat dissipation of glass is heat conduction and heat radiation, and the amount of heat loss is related to the thickness of the glass and the thermal conductivity of different glasses.

Insulating glass is currently an effective energy-saving glass.

3.Energy-saving doors and windows refer to the fact that in summer, in the case of air conditioning, the cold air released by the air conditioner will not be lost through the gaps in the window frame, glass, doors and windows, resulting in more power consumption of consumables, and the same is true in winter, which will not only cost money, but also cause environmental radiation caused by air conditioning and heating. The energy savings of windows depend not only on the material, but also on the process of glazing and doors and windows.

Of course, compared with other ordinary doors and windows, energy-saving doors and windows put forward higher requirements for energy saving of doors and windows. Energy-saving treatment is mainly to improve the thermal insulation performance of materials and the sealing performance of doors and windows.

4.Hardware accessories play an important role in energy-saving doors and windows. They are not only closely related to the airtightness, water tightness and wind pressure resistance of doors and windows, but also play a very important role in safety and other performance.

The selection of hardware materials, the selection of good hardware accessories is the basic guarantee of doors and windows, and energy saving. Hardware accessories with poor material are easy to age and break. This will lead to inflexible opening of doors and windows or cannot be opened or closed, which can not only ensure the airtightness and energy saving of building doors and windows, but also bring harm to people's life safety.

Therefore, when choosing hardware accessories, you must choose brand products with quality assurance, and you can't be greedy for cheap.

Take everyone to understand what is energy-saving system doors and windows! The so-called energy-saving system doors and windows, is not a single use of thermal insulation bridge aluminum profile or the use of low-e insulating glass energy-saving materials, it is a combination of systems, to measure whether the building doors and windows are energy-saving should be mainly considered several elements, that is, heat convection, heat conduction and heat radiation.

Design and selection of broken bridge aluminum profilesFirst of all, the performance of different profiles is different, mainly the different thermal conductivity coefficients determine the energy consumption of doors and windows.

Choice of glassEnergy loss is mainly caused by three factors: convection, conduction and radiation.

Choice of accessoriesThe same is true for doors and windows, and hardware accessories play a great role in energy-saving doors and windows.

Correct assemblyThe front is the requirements of the door and window components, and it is important to choose the components reasonably.

From the above analysis, it is known that the energy-saving system doors and windows, only the use of good broken bridge aluminum profiles or glass and accessories is not enough, a good combination of materials, is the element of the system doors and windows.

Energy-saving system doors and windows refer to the ability to reduce the cost of decoration and operating costs, to take into account energy saving, convection, heat, heat radiation and other factors, these conditions are indispensable, need to consider the material thermal conductivity coefficient, can get the best energy-saving effect.

Energy-saving doors and windows refer to the lighting, sound insulation, ventilation, thermal insulation and other aspects have a strong function, first of all, in the lighting to strengthen at the same time to ensure that the indoor temperature is not lost, and to have a certain strengthening in sound insulation and indoor airtightness.

If you can fight, there will be a certain tradition, rheumatic windows and doors are very good, and there are also a lot of anti-theft.

It will save energy, and it will also take into account heat radiation and heat conduction, so it can keep warm and exchange heat.

System doors and windows: refers to the doors and windows that have gone through the three processes of system research and development, tailor-made and standardized installation. It is a perfect organic combination of performance system, which needs to consider a series of important functions such as water tightness, air tightness, wind pressure resistance, mechanical strength, heat insulation, sound insulation, anti-theft, sun shading, weather resistance, operation feel, etc., as well as the comprehensive results of the performance of equipment, profiles, accessories, glass, viscose, and seals, all of which are indispensable to form high-performance system doors and windows.

Five major performances. First of all, let's understand the five performance levels of doors and windows:

1) Wind pressure resistance: refers to the performance of external doors and windows without damage under wind pressure; For example, it is not easy to crack, the profile is damaged, the glass is damaged, the bonding failure, and the opening obstacle of loose hardware, a total of 9 levels of high acres, and the average of the system doors and windows reaches the 6-level standard (Wangmei doors and windows 98 series standard configuration reaches the 9-level international highest level).

2) Air tightness: To put it simply, the ability of external doors and windows to prevent air penetration in the normal closed state is divided into 8 levels, the average of system doors and windows reaches 6 levels, and the imported system doors and windows can reach the highest level. (Wangmei doors and windows 98 series standard configuration up to level 8 international highest grade).

3) Watertightness: The ability of doors and windows to prevent rainwater infiltration when it is windy and rainy under normal closed state is divided into 6 levels, and the average of system doors and windows reaches 4 levels. (Wangmei doors and windows 98 series standard configuration up to level 6, the highest level of the world).

4) Thermal insulation performance: that is, the K value mentioned in the professional terminology of doors and windows, the system doors and windows are not lower than the 3-level standard, (Wangmei doors and windows 98 series standard configuration up to level 7, K value reached.)

5) Sound insulation performance: also known as sound insulation and noise reduction, refers to the ability to reduce the sound transmission between the sound source and the listener, which is divided into 6 levels, and the system doors and windows are not lower than the 3-level standard. (Wangmei doors and windows 98 series standard configuration up to level 4, glass configuration increases, sound insulation increases accordingly).