Redmi note failed to flash, how to put the flashing package into the phone s memory

If you can enter recovery, flash the machine; You can't just "save bricks".

Enter Recovery Mode Method:

Method 1: If the phone is turned on, please turn it off first, remove the battery and then put it on, and in the case of power off, press and hold the power button + home button at the same time until the recovery interface appears.

Method 2: If the above methods cannot be entered, then turn on the computer again, first press and hold the volume + button, and then press and hold the power power button until the recovery interface appears.

Recovery flash, the steps are as follows:

Flash the ROM from the corresponding mobile phone on the Internet, and then copy it to the root directory of the SD card, the ROM is in ZIP format (you can open it to verify it, the ZIP package must have meta-inf This folder is the flash package, but do not change the files in the ZIP package), do not unzip. After the copy is complete, you can disconnect the phone and the computer.

Shut down the computer completely (it is best to pick the battery after shutting down), and then enter the recovery interface through the special button combination.

Select Wipe Data Factory Reset and press the power button to confirm, then press OK with yes. Then select Wipe Cache Partition and press OK, and select Yes to OK. (This is the legendary double WIPE, friends who know about flashing must have heard of it).

Select the fifth option, install zip from sdcard, press the power button to confirm, then select choose zip from sdcard, press the power button to confirm, then select the rom to flash the file, press the power button to confirm, and then select yes and press the power button to confirm to start flashing.

After brushing, that is, the interface after the progress bar is finished, return to the main interface of recovery. At this time, select Reboot System Now and press the power button to restart the phone. The first reboot takes a long time, so be patient! That's the end of flashing.

Put it on an external memory card.

Hello. For the stability and data security of the system, the MIUIV5 and 6 systems do not allow the software to be installed into the SD card, and the software is forcibly moved, which may make some software unable to be used normally. There are many advantages to installing the app into your phone's memory.

1.Installs into your phone to run faster 2Install it into your phone to save more power 3

Mobile ROMs can only be used to install software, and installing apps into your phone can save space on your SD card.

More details:

Because your phone is Android, Android can't move the software to the SD card.

You try not to brush the official system.

Uninstall some in Settings - Applications - All and clear the data before uninstalling.

Use 360 Guardian and other security software to manage the self-start program and uninstall the built-in software (360's in the security protection - super mode), clean up and speed up, and move the software. Root is required, followed by a root method, if you are worried that root will affect the warranty and upgrade, you can remove the root.

Although some programs are exited, there are still background processes, which still occupy memory, click on the floating window of security software such as 360 Guard, and close some.

Delete the ** cache in the DCIM folder of the SD card.

Flashing is generally not recommended. The problem of insufficient memory running on the phone can be solved like this:

The mobile phone system comes with a mobile phone manager (such as Huawei mobile phone), and it is generally not recommended to install any mobile phone antivirus or assistant software, including Tencent mobile phone assistant, 360 mobile phone assistant, etc., because these things are likely to be the culprits that affect the speed of the mobile phone. All you need is the app that comes with your phone.

The first is to clean up the call records and information of the mobile phone. It is to delete all the call logs that are too many and delete all the short messages.

The second is to uninstall mobile phone apps that are not commonly used. Simply uninstall the mobile apps you don't use often, and don't be sorry at all.

The third is to clean up the memory of the phone. This is generally in the "task manager" of the mobile phone, you can press and hold the home button (usually at the bottom of the phone** position) talker, close the open mobile phone application, and then clean up the memory. Some mobile phones have a small box icon at the bottom of the screen, click on it to pop up the program running in the background, press and hold the program and slide your finger up to turn off the operation.

The fourth is to restore the phone to factory settings. If the above methods do not work, you can restore your phone to factory slip settings as a last resort. This generally requires a PIN code, the default PIN code is "0000", "1234" or "1111", if you have set the PIN code, please enter the set code value.

1.The Redmi Redmi3S system itself does not provide root:

3.Connect your phone to your computer. After a successful connection, select "One-click Root".

During the process, the phone will automatically restart several times (remember not to unplug the cable). Halfway through, the phone will prompt you to install the software required for root, click to install and then the phone will enter a reboot.

Succeed. Icons will be displayed on the desktop of the phone.

1. Redmi mobile phones can obtain root permissions, and the warranty is not affected, and other brands of mobile phones do not give warranty to obtain root access to Xiangpin.

The first step, go to the computer to call you to log in, log in to the same Xiaomi as the mobile phone, click to unlock, operate according to the prompts, **Install the unlocking tool to the computer, you can unlock the boot lock, but it takes time to unlock, and it may not be possible to lift it at that time.

The second step, click on the homepage of the official website**, select the mobile phone model version, enter the development version of the system package on this page, and then click on the tutorial on the left side of this page, select the line brush method, in the tutorial**flash flash installation of the flashing tool to the computer, and brush the system line on the computer as the development version of the system.

After completing the above two steps, you need to obtain the root permission, you need to obtain it completely, and you also need to use the root tool.

You can't get root privileges on the stable version of the system, and you can't get it normally. Forced to use a tool to obtain, if it is a Redmi phone, whether it is successful or not, it will cause the phone to crash and stuck, the system cannot be updated, or the boot card mi cannot enter the phone, so you can only go to the after-sales service to pay to repair the system.

Hello. According to the problem you described, it is impossible to solve it for you if you don't see Chi Buzhi on your mobile phone. Your phone problem can only be solved by seeing your phone face-to-face. In order not to affect your use.

a.Please go to a Xiaomi authorized repair point near you or Mi Home for testing.

Mi Home query path:

Query path of Xiaomi authorized repair outlets:

The home is open from Tuesday to Sunday, from 10 a.m. to 6 p.m.

**The after-sales service of Xiaomi mobile phones is: refund within seven days, replacement within fifteen days, and within the one-year warranty period, non-man-made damage is completely free.

b.If you don't have a branch near you, if you bought it on the official website of Xiaomi, please go to the official website of Xiaomi.

Log in to the place where you purchased this product, select to apply for after-sales service in the order details, and then please keep it unblocked. A staff member will contact you. Or you can also call Xiaomi customer service directly**If you don't buy it on Xiaomi's official website, you can call Xiaomi customer service** to consult.