Huawei phone 5X does not plug in headphones, it is also headphone mode, what to do

If the phone is not plugged into the headset and the headset icon is displayed, perform the following troubleshooting:

1. Please try to plug in and unplug the earphones once to confirm whether the earphone icon display is back to normal.

2. If the earphone icon is still displayed after plugging and unplugging the earphones, please restart the phone to try to see if it returns to normal.

3. If you try to plug and unplug the earphones and restart them, there is still a headphone icon displayed. Please check that there is liquid, moisture, or dust near the earphone jack, which may affect the function of the earphone jack. Back up your data in advance and go to a Huawei Customer Service Center near you for maintenance.

2) You can check the service center address on Huawei's official website.

In this case, it is recommended to use headphones to poke the headphone jack a few more times, it may be that the spring in the headphone jack did not bounce back, poke a few more times, if the headphone mode is still displayed, that is, the CPU has a problem, the CPU mistakes the headphone mode, if the mobile phone is not out of warranty, hurry up to find after-sales maintenance.

There is a small shrapnel in the headphone socket, and when the headset is inserted, the shrapnel squeezes and connects some circuits or something, so the phone knows that you are using the headphones. If the headphones are not plugged in and the shrapnel does not reset, the phone will mistakenly think that you are using the headphones, which will cause the above problems! The way to deal with it is to think about resetting the shrapnel.

It may be that the micro switch in the headphone jack fails, the headphone jack is damp, and it is accidentally dropped and other situations that become headphone mode.

It is recommended to try the following methods:

1. Turn on the phone again and try it, quickly plug and unplug the earphones until the earphone mode is released.

2. Use a cotton swab dipped in alcohol to rotate and wipe the earphone plug and mobile phone jack (the plug or jack may be oxidized) and try it.

3. It may also be caused by dust in the headphone jack, use a paper towel in the headphone jack and rotate it back and forth a few times to try it.

I bought the LG Optimus GPro for three months, the Korean version of foreign garbage, I may have fallen a few times recently, and the phone sometimes becomes headphone mode without headphones plugged in, which is the headphone logo that appears in the status bar at the top....

Cause: There are many reasons for this phenomenon, which may be liquid, moisture, dust, etc., or whether the earphone is standard or not, which may affect the function of the earphone jack.

Solution: 1. Please try to plug in and unplug the earphones once or restart the phone to try.

2. If there is liquid or dust in the earphone jack, please try to clean it.

The Huawei phone does not have headphones plugged in, and the headphone mode is displayed. First, check if ** Bluetooth is connected. The second possibility is that there is a foreign object in the headphone jack. What is the reason for the examination? Or turn it off and on again.

It may be that you picked out the headphone mode in the system of your phone, so that's why it's like that

1. In general, this is caused by the dampness of the mobile phone or the water entering the headphone jack, try to throw out the water in the earpiece, and then gently screw in the water with a cotton swab, and then use the hair dryer to turn on the hot air and slowly dry the remaining moisture, and restart the mobile phone;

2. It may also be due to poor contact in the headphone jack of the mobile phone, or it may be caused by foreign objects inside, use a cotton swab or paper towel to clean it up;

3. If it still can't be solved after cleaning, it may be caused by the failure of the headphone jack, and it is recommended to take the mobile phone to the after-sales maintenance point for inspection and repair.

If your phone is not plugged into the headphones interface and the headphone icon is displayed, there are many reasons for this phenomenon, such as liquid, moisture, dust, etc., or whether the earphones are standard or not, which may affect the function of the headphone jack. Here's how you can try to solve it:

1. Please try to plug in and unplug the earphones once or restart the phone to try.

2. If there is liquid or dust in the earphone jack, please try to clean it.

3. If your phone still displays abnormally, back up your data in advance (QQ, WeChat and other third-party apps need to be backed up separately) and bring the relevant purchase voucher to a nearby Huawei Customer Service Center for more help.

Boarding service. Repair Spare Parts**.

Make an appointment for service.

The Huawei phone is not plugged into the earphones, and the headphones are plugged in, which means that the phone has entered the headphone mode.

It should be caused by the failure of the micro switch of the earphone jack, that is, the earphone has been pulled out, but the switch has not been disconnected in time.

You can try to quickly plug and unplug the headphones several times or restart the phone to see if the headphone mode on the phone disappears.

If there is still no sound, it is recommended to take it to the after-sales outlets of Huawei mobile phones for testing and repair, or replace the headphone jack with a new one.

Blow dry the moisture.

Turn off your phone first.

There is no hair dryer for the question.

In addition, the mobile phone can not be used after the water must be turned off, the mobile phone is all dry, and the correct way to use it in the future is to get a special instrument for maintenance, otherwise the inside will be seen and slowly broken.

Obviously there is no headphone plugged in.,But the headphone mode is displayed.,This can be turned off.,Turn it on again and it's normal.。

Huawei phones don't have headphones plugged in but show headphone mode, I think you can directly turn off his headphone mode, or plug in a headphone style.

You can enter recovery mode to restore the factory to try, this can generally be solved.

Taking Huawei P40 as an example, the reasons why the headset mode does not display when plugged into the phone are as follows:

1. In general, this is caused by the dampness of the mobile phone or the water entering the headphone jack, try to throw out the water in the earpiece, and then gently screw in with a cotton swab to absorb the water, and then use the hair dryer to turn on the hot air and slowly dry the remaining moisture, and restart the mobile phone.

2. It may also be due to poor contact in the headphone jack of the mobile phone, or it may be caused by foreign objects inside, use a cotton swab or paper towel to clean it up;

3. The mobile phone is too stuck and causes slow response, clean up the garbage of the mobile phone, and then close the programs that do not need to run in the background, enter the mobile phone cleaning software, and clear the cache data that is not needed, 4. If it still cannot be solved after cleaning, it may be caused by the failure of the headphone jack, it is recommended to take the mobile phone to the after-sales maintenance point for inspection and repair.

This answer is available for models of most mobile phone brands such as Apple, Huawei, Samsung, Xiaomi, etc.

Plugging in the earphones and not showing the headphone mode may be because the earphones are not plugged in tightly or the earphones (mobile phone) are damaged, it is recommended that you replace the earphones to try, if you can use it, it proves that the earphones are problematic, if not, the mobile phone may have a problem.

It may be that it is not plugged in, or it is not touched, it will not be displayed and mode.

1. First enter the desktop of the mobile phone, you can see that it is now the headphone mode, click the [Settings] button to enter;

2. Click [Smart Assist] on the settings page;

3. Enter the intelligent assistance page and click [Intelligent Wire Control];

4. It can be seen that the [Intelligent Line Control] mode is open;

5. Click the switch button at the back to turn off the [Smart Line Control] mode; So the headphone icon above is gone.

If your phone is not plugged into the headphone interface but displays the headset icon, you can do the following:

1.Try plugging and unplugging the headphones once or restarting your phone.

2.If there is liquid or dust in the headphone jack, try to clean it.

3.If your phone still doesn't display properly, contact Huawei Consumer Service** (950800), back up your data in advance (third-party apps such as QQ and WeChat need to be backed up separately), and bring your proof of purchase to a Huawei Customer Service Center near you for more assistance.

Make an appointment for service. Boarding service.

Repair spare parts** inquiry.

If your phone shows the headset icon on the Unplugged Headphones interface, you can do the following:

1.Try plugging and unplugging the headphones once or restarting your phone.

2.If there is liquid or dust in the headphone jack, try to clean it.

3.If your phone still doesn't display properly, contact Huawei Consumer Service** (950800), back up your data in advance (third-party apps such as QQ and WeChat need to be backed up separately), and bring your proof of purchase to a Huawei Customer Service Center near you for more assistance.

Repair spare parts** inquiry.

Make an appointment for service. Boarding service.

Huawei phone does not have headphones plugged in but displays headphone mode, how to solve it?

Hello, dear, I'm glad to answer for you! The reason why the Huawei phone does not plug in the headphones but the headphone mode is displayed is caused by the following reasons: 1. Detection fault:

It is the phone's headphone jack or headphone detection sensor that is faulty, causing the phone to be in headphone mode all the time. 2. Software problems: There is a problem with the software of the mobile phone, such as system updates, third-party applications, etc., which causes the mobile phone to mistakenly think that the headphones are plugged in.

Solution: 1. Clean the headphone jack: First of all, you can try to clean the headphone jack, it is dust or other impurities that cause the mobile phone to mistakenly think that the headphones are plugged in.

It can be cleaned with items such as cotton swabs or blown balloons. 2. Restart the phone: Try to restart the phone, it is caused by a problem with the mobile phone software, and restarting the phone can solve some software problems.

3. Check the headphone jack: check whether the headphone jack is damaged or loose, and if there is damage, the headphone jack needs to be replaced. 4. Replace the detection sensor of the headset of the bend Kai:

If the headphone jack is normal, you can consider replacing the earphone detection sensor empty eggplant, and you need to find a professional maintenance service center to replace it.