The phone does not scan the Bluetooth headset 5

The specific steps to pair your phone with Bluetooth headphones are as follows:

2. To make the Bluetooth headset power on, you need to press and hold the switch button of the Bluetooth headset for about 3-5 seconds.

3. Until the indicator light: blue light, red light flashes alternately and then releases.

4. At this time, the Bluetooth headset and the mobile phone will enter the matching state.

5. Note that the distance between the mobile phone and the Bluetooth headset should be within 10 meters.

6. After the Bluetooth headset is displayed on the phone, click OK to connect and use.

7. After the successful matching, the sound on the mobile phone will come out through the Bluetooth headset, receive calls, listen to songs and other matters.

8. Some Bluetooth headsets and mobile phones need to enter a password to pair, generally 0000 or 8888.

Hello, the mobile phone can't scan the Bluetooth headset, because your Bluetooth headset is not turned on correctly, it may be that your Bluetooth headset is not turned on to the "can be searched" state, so there is no search.

1.Press the Bluetooth headset power button for at least 6 seconds, and don't let go when you see the indicator light in the middle, remember this! Don't let go until you see the indicator light flashing red and blue alternately, which is in a state of alternate flashing.

4.Click Pair, OK, it's OK.

If it helps, the answer, thank you!

The headset is held and let the phone teach.

Hello, I am happy to serve you and give you the following answers: 1. Check whether the Bluetooth headset is on: Check whether the Bluetooth headset is on, if not, please follow the operation steps on the manual to turn on the Bluetooth headset.

2. Check whether the phone's Bluetooth is on: Check whether the phone's Bluetooth is on, if not, turn on the phone's Bluetooth and set it to visible. 3. Check whether the Bluetooth headset is in the list of Bluetooth devices on the phone

Check if the Bluetooth headset is in the list of Bluetooth devices on your phone, if not, try searching for the Bluetooth headset again and connect it to your phone. 4. Check whether the Bluetooth headset is connected to the phone: Check whether the Bluetooth headset is connected to the phone, if not, try to reconnect the Bluetooth headset, and make sure that the distance between the Bluetooth headset and the phone is not more than 10 meters.

5. Check if the Bluetooth headset is working properly: Check if the Bluetooth headset is working properly, if not, try to reconnect the Bluetooth headset and make sure that the distance between the Bluetooth headset and the phone is no more than 10 meters. 6. Check the battery level of the Bluetooth headset

Check the battery level of the Bluetooth headset, if it is low, try charging it, and make sure the battery of the Bluetooth headset is sufficient. 7. Check the driver of the Bluetooth headset: Check the driver of the Bluetooth headset, if it is not installed, please try to install the driver of the Bluetooth headset to make sure the Bluetooth headset works properly.

Hello dear, if your phone can't detect the Bluetooth headset, you can try the following methods to solve the problem:1Make sure the Bluetooth headset is turned on and connected.

Some Bluetooth headphones require a long press of the on/off key for a few seconds to enter pairing mode. 2.Confirm that your phone has Bluetooth turned on, and do not go too far away from the Bluetooth headset when searching for the device, so as not to have a bad signal.

3.Try restarting your phone and Bluetooth headphones and try connecting again. 4.

If the above methods still can't solve the problem, you can try to factory reset your phone and then reconnect it. 5.If your phone and Bluetooth headphones are both newly purchased, you may need to pair them first.

1. If the mobile phone cannot detect the Bluetooth headset, first confirm that the Bluetooth function of the mobile phone has been turned on, and click the power button to turn on the Bluetooth headset.

2. Under normal circumstances, when the Bluetooth headset enters the pairing state, you only need to keep holding the power button for about 10 seconds and don't let go, the headset lights flash alternately, and the headset will turn from the off state to the power on, and the headset indicator will be on and on, and the Bluetooth headset will be successfully turned on when the headset indicator light is on and turned into a pairing state.

3. Then open the phone's settings, tap the Bluetooth option, slide the switch to the right button to turn on, and find the earphones to pair.

4. When the shape of the earphone is displayed above the phone, or the Bluetooth device is displayed, it means that the Bluetooth device is successfully connected.

Abstract Hello, I'm glad to have your problem, your situation is generally caused by the following reasons: the Bluetooth headset has not entered the pairing mode, turn on the pairing mode and then connect; Or it has been connected with another mobile phone, and the previous pairing records have been saved, and you need to delete the previously saved records and pair again; If the Bluetooth version of the mobile phone is not compatible with the Bluetooth version of the headset, or the Bluetooth is damaged, it is recommended to contact the after-sales service for inspection and repair.

What should I do if my phone can detect the Bluetooth headset but it can't be connected?

Hello, I'm glad to have your problem, your situation is generally caused by the following reasons: the Bluetooth headset has not entered the pairing mode, turn on the pairing mode and then connect; Or it has been connected with another mobile phone, and the previous pairing records have been saved, and you need to delete the previously saved records and pair again; If the Bluetooth version of the mobile phone is not compatible with the Bluetooth version of the headset, or the Bluetooth is damaged, it is recommended to contact the after-sales service for inspection and repair.

Okay, thanks!