-
I'm going to answer it, I can't find this answer on the Internet, I figured it out myself.
My operating system: win10 x64-bit professional PS version: PS cc 2018
Plug-in to find a place by yourself** version, the installation directory is directly selected by yourself, and then there is a version of the plug-in installation directory, click the + sign in the lower left corner, select the required directory under the ps directory, and then go to the next step, open it after installation.
Nik Software Color Efex Pro directory Color Efex Pro, first register, the last step after the registration is completed, the key step, that is, whether you can display this filter option under the filter menu in PS.
Copy the entire folder of Color Efex Pro 4 (64-bit) in the Nikk Software Color Efex Pro directory to the plug-ins path in the PS installation directory, and then open PS to see this filter menu.
-
already installed. But it's not a cracked version. Ay.
Ask for a registration code.。。 It is not copied directly to the filter directory. There is a hint for you to choose the supported software when installing.
Mine inside I click the plus sign and select the root directory of the filter here.
-
Did you get the plug-in into the plug-in directory of PS? Is your PS 64-bit or 32-bit, and under the check, is it 64-bit or 32-bit that you put in.
-
Install it directly into the Photoshop plug-ins folder!
Open a ** when you open PS again, click on the filter, and you can see the filter!
-
You look for it in File-Auto.
-
The Nik Color EFEX Pro filter installed in PS cc cannot be applied to the image after using it and clicking OK, this is a problem with the software version, you can reinstall PS, the specific operation steps are as follows:
1. **Photoshop CS6 Chinese version, and unzip to the specified location, find it in the adobe cs6 folder after decompression", double click to start installation.
2. After launching the installer, the following window will appear, click Ignore to continue the installation.
3. Then the interface of initializing the installer will pop up.
4. Select the installation version, because there is no purchase, here you choose to install the trial version.
5. Click Accept License Agreement.
6. In this step, you need to log in to the Adobe ID you created earlier.
7. If you don't have a Create ID, you can create it on the page after clicking Login.
8. After the login operation is completed, you will enter the installation content interface.
9. Wait for the installation to be completed, and the installation can be completed in about 6 10 minutes.
-
I am often consulted about the Nik Color EFEX Pro filter after using it, and it is not applied to the image after clicking OK. It can be handled like this:
Click "Settings" in the bottom left corner of the filter
Select "After Click", toggle the two options inside (apply the filter effect to the current layer to the other layer), and then click "OK", and you're good to go.
-
In the lower left corner of the Nik Color EFEX Pro interface, "Settings" - click "Confirm" - select "Apply filter effect to the current layer".
-
Open the plug-in and select the current setting under the settings to OK.
-
Send a screenshot of the filter you use.
-
How do I install nik? Thank you.
-
1. Start the installation file in the "setup" directory: "colorefexpro4 full pl win all." The dialog box shown in the following figure appears on the interface, click OK.
2. The dialog box as shown in the following figure appears, click the "Next" button.
3. The dialog box shown in the following figure appears, and the shirt is dug and clicks "I agree".
4. When the dialog box shown in the following figure appears, click Next.
5. When the dialog box shown in the figure below appears, click the "+" button at the bottom left and select "Folder Path of the Plugin".
6. On the dialog box shown in the following figure, select the "required" directory in the installation directory of the 64-bit version of PhotoshopCC, and then click "OK".
7. After the dialog box shown in the following figure appears, or click OK.
8. The dialog box shown in the figure below appears, indicating that the installation is in progress.
9. A dialog box appears as shown by the lower force, indicating that the installation is complete.
-
3. Then click "Next" in the pop-up window.
4. Then click "I agree" in the pop-up window.
5. Then click "Browse" in the pop-up window and select the location you want to install.
6. Then click in the pop-up window"+"。
7. Then click on the required under Adobe in the pop-up window.
8. Then click "Install" in the pop-up window.
9. Then wait for the installation to complete.
10. Then turn on PS to use the filter.
-
After you click OK, the installed NIK Color EFEX Pro filter is not applied to the image. This is an issue with the software version.
2. Open it with PS to perform simple repairs, dermabrasion, brightness adjustments, etc. before color grading.
3. Select the image layer, click "Filter" in the menu bar, find Nik Software in the drop-down menu, and open Color Efex Pro.
4. In the upper left corner of the window is the classification of filters, which makes it easier to find filters that suit different **. Move your cursor over some type of filter, on the right side, you will see the image icon and click "Open".
5. There is a preview on the left side, click on the color scheme you like. There's a compare button at the top to see what happens.
6. On the right side is a fine-tuning panel that allows you to control some parameters, such as the strength of the filter, etc. You can click "Add Filter" to use multiple filters.
7. After adjusting to the satisfactory effect, click "OK" to save the color effect to the PS layer.
-
The installed Nik Color EFEX Pro filter is not applied to the image after using it, which is a problem with the software version. Nik Color Efex Pro color filter use is determined to have no effect workaround:
2. Open it with PS**, and perform simple flaw repair, dermabrasion, brightness adjustment and other operations before color grading.
3. Select the image layer, click "Filters" in the menu bar, find Nik Software in the drop-down menu, and open Color Efex Pro.
4. In the upper left corner of the window is the classification of filters, and it is more convenient to find different ** filters that are more suitable from the classification. Move your cursor over a type of filter, you'll see an icon on the right, click to turn it on.
6. On the right is the fine adjustment panel, which can control some parameters, such as the intensity of the filter, etc., and you can click "Add Filter" to use multiple filters.
7. Click "OK" after adjusting to the satisfactory effect, and you can save the color grading effect to the PS layer.
-
After the use of the Nik Color Efex Pro color filter is confirmed, if there is no effect, it can be solved like this:
Click the "Settings" button in the lower left corner of the filter, select the "After clicking OK" tab, and switch between the two options inside, and you're good to go:
2.If the problem persists, it is recommended to install the official version after uninstalling it.
-
Click the "Settings" button in the bottom left corner of the filter, select the "After clicking" tab, and toggle the two options inside.
-
Nik Software Color Efex Pro 4 can be used stand-alone or as a PS plug-in.
Independent use method: After installation, open the color efex pro in the installation directory, you can use it alone:
-
Some of them should be saved on the C drive, and some of them can be saved directly on the disk you specified.
-
I'm PS cc 2015 x64, and after installing PS, it crashes when I open it, and delete the selective tool in the plug-in google folder to use it.