Is it good to use tempered floor for workshop floor?

If the factory has decorative requirements for the floor, such as requiring green flooring, or yellow marking zoning, only epoxy flooring can be selected. According to the different requirements for the degree of wear resistance, or there are special requirements for the ground, the following options can be made:

1. Mainly walking, no heavy-duty mechanical walking. This allows the option of an epoxy flat floor (epoxy thin coat floor).

2. There are often heavy machinery walking, which has requirements for wear resistance and compression resistance, so it is necessary to choose epoxy mortar flooring.

3. The interior decoration requirements are high, so you can choose epoxy resin self-leveling or colored sand flooring.

4. There are anti-static requirements for the ground, so that you can choose anti-static flooring, and there are ordinary and self-leveling options, such as garment factories and telecommunications rooms.

5. There are strict requirements for ground anti-corrosion, and epoxy resin anti-corrosion flooring can be selected.

Seven advantages of tempering agent flooring:

1. Ultra-hardening, high wear resistance; Maximize the hardness, strength and wear resistance of concrete. The hardness of the floor treated with Letek concrete sealant curing agent is increased to 8 on the Mohs scale compared to the untreated floor. 50% increase in strength over untreated ground within a month and continues to increase over time.

2. Anti-heavy load and impact-resistant; The tempered floor can withstand the high-frequency rolling of various vehicles such as trucks, forklifts, and carts. It is especially suitable for industrial warehouses, heavy machinery processing industry, logistics warehouses, garage parking lots, exhibition centers, shopping centers, airports, docks and other industry sectors.

3. Impermeable, waterproof, oil-proof, improve chemical resistance; Floor toughener can effectively penetrate into the concrete, and chemically react with it, lock the pores inside, play a permanent sealing effect on the concrete surface, can effectively inhibit water, oil and other surface dirt into the concrete, but also greatly improve the chemical resistance of the concrete surface.

4. Dust-proof, sand-proof, green and environmentally friendly; The salt in the concrete is the usual cause of dust on the concrete floor, and the floor tempering agent acts with the salt in the concrete to form a part of the whole concrete, which is permanently sealed, so that the ground can completely achieve the effect of no sand, no ash, and no dust purification.

5. Easy to clean and low maintenance cost; Ultra-low maintenance, only need to mop and wash. (No need for waxing, varnishing and other equipment).

6. Good anti-aging performance. The gloss gets higher and higher with the use of time; Due to the friction effect of frequent cleaning, use, and the passage of people and vehicles, the ground will gradually develop an attractive luster, and this luster will become brighter and brighter. This is completely different from traditional flooring such as emery flooring, epoxy flooring, terrazzo flooring, etc.

7. Long service life and high cost performance; The service life of the ground treated by the tempered floor can reach more than 20 years. This is a service life that cannot be achieved by any kind of traditional flooring. Therefore, it is extremely cost-effective.

The general workshop is used epoxy flooring.

How about tempered flooring? Is tempered flooring good?

Answer: Tempered flooring is divided into concrete color tempered flooring and ordinary tempered flooring, and the ordinary tempered flooring in the Chinese market includes: Nalute tempered flooring, Ansaffre Miaole tempered flooring, Shuerrak tempered flooring and Powerstone Bole tempered flooring, etc.

The concrete color tempered floor is only two kinds: Nalut concrete color tempered floor and Meilishi concrete color tempered floor. The following takes the Nalut concrete color tempered floor as an example to illustrate how the concrete color tempered floor is. Is tempered flooring good?

Of course, the concrete color tempered floor is good, and the concrete color tempered floor has the following incomparable advantages.

1 Concrete colored tempered flooring prevents ASR (silicon adverse reaction). Concrete sealing curing agent has the characteristics of low viscosity and low alkalinity, which reduces the reaction rate with calcium compounds in concrete, and can penetrate deeper, react more completely, and penetrate the concrete surface more evenly, so that the adverse reaction of ASR stops.

3. The concrete color tempered floor does not contain intumescent latex, which prevents the concrete from absorbing water and flooding moisture.

4. Concrete color tempered floor effectively prevents the penetration of water and oil and chemical erosion.

5. Concrete color tempered floor maximizes the hardness, strength and wear resistance of concrete. The hardness of concrete treated with concrete sealant curing agent increases to 7° on the Mohs scale compared to untreated concrete. Concrete sealant curing agent treated floors are 50% stronger than untreated floors within a month, and continue to increase over time.

6. The concrete color tempered floor quickly shows the gloss, and the more you use it, the brighter it gets.

7. Concrete color tempered floor has good permeability, permanent protection, and will not peel off.

8 Concrete colored tempered floor water-based products, non-VOC, non-combustible, non-toxic. It is an environmentally friendly product with high-tech content.

9. Concrete color tempered floor construction is convenient, once coated, no need to scrub. Low maintenance and no waxing required.

10.Concrete colored tempered flooring is suitable for new and old concrete.

11.Concrete colored tempered flooring is easier to clean.

1. The epoxy floor used in the workshop is good.

2. Epoxy floor is a high-strength, wear-resistant, and beautiful floor, which has the advantages of no joints, solid texture, good chemical resistance, anti-corrosion, dust-proof, convenient maintenance, and low maintenance cost. A variety of solutions can be designed according to different application requirements: such as thin layer coating, 1-5mm thick self-leveling floor, anti-slip and wear-resistant coating, mortar coating, anti-static, anti-corrosion coating, etc.

2. Epoxy flooring can be roughly divided into: epoxy resin grinding stone floor, epoxy resin colored sand pressed sand floor, epoxy resin self-leveling floor, epoxy resin mortar floor, epoxy resin flat coating floor.

You can use epoxy flooring, in addition to what your workshop does, generally speaking, you can use epoxy flat coating on the line, if it is relatively high, you can use it from the popular, but ** a little higher.

The first point of the cost of floor paint, a higher point of ground adhesive.

1. High wear resistance and excellent scratch resistance. The surface Mohs hardness reaches 8, which is much higher than the surface hardness of cement floors, corundum floors, wear-resistant floors, etc.

2. Suitable for a variety of grounds. Because the tempering agent is a water-based reagent, it has a high permeability function, so it is suitable for cement, emery, terrazzo and other surfaces.

3. The surface is smooth and bright, and the colors are diverse. The surface is as bright as a mirror, and with the increase of service life, its gloss is better, and the diversity of colors can effectively and reasonably arrange the division between areas.

4. Long service life, service life of more than 20 years. It is recognized as the longest-life product of the floor category, which can prevent the penetration of external substances and protect the concrete, thereby prolonging the service life of the floor.

5. Environmentally friendly and dust-free. Colorless, odorless, inorganic water-based products, no pollution, no corrosion, no combustibility, harmless to the human body during use.

6. One-time construction, maintenance-free. The tempering agent is directly constructed on the concrete ground, which is simple to construct, short in duration, low in maintenance cost, and does not need to be waxed.

Curing and polishing floors are recommended.

Because of its unique properties, concrete curing and polishing floor is the best floor with the best performance.

Curing and polishing floor is a filler with stable properties that react with the components of concrete and cement, fill the tiny pores in the concrete, increase the density of the concrete floor, increase the strength, hardness, surface sealing, wear resistance, etc. of the concrete floor, and prevent concrete aging, dusting, alkali return, anti-slip, etc. Easy to care for and suitable for both old and new concrete floors.

1. Product safety and environmental protection.

2. Strong and durable.

3. Prevent concrete aging and weathering.

4. Prevent cracking.

5. Compressive and wear-resistant.

At the same time, there are some disadvantages of curing and polishing the ground.

The uniformity of the ground is not good, and it will be affected by the original concrete ground base. If the uniformity of the concrete floor is not good, the damage repair will be obvious.

Oxfam Artisan Flooring asks you for the answer, I hope it can help.

The dry grinding process of tempered floor is the product of the rapid development of the grinding machinery industry and the technological innovation of grinding tools. Steps: Pour the curing agent C agent and push it well, soak and infiltrate it to keep the ground moist; The grinding machine is loaded with No. 100-300 diamond, and the ground is polished no less than 5 times, and the ground is kept moist during the grinding period; After 3 hours of infiltration, use a water suction machine to blot off excess agent C; Allow to dry for at least 1 day.

Pour the curing agent A (the first time) and push it evenly, soak and penetrate to keep the ground empty and moist; The grinding machine is loaded with No. 500-1000 diamond, and the ground is polished no less than 7 times, and the ground is kept moist during the grinding period; After 3 hours of infiltration, blot the excess agent A with a water absorber and dry for at least 1 day. Pour the curing agent A (the second pass) and push it evenly and soak and penetrate to keep the ground moist; The grinding machine is equipped with No. 1000-2000 diamond, and the ground is polished and polished no less than 8 times, and the ground is kept moist during the polishing period; After 3 hours of infiltration, use a water absorber to blot off excess agent A; Allow to dry for at least 1 day.

Tempered floor is a new type of concrete surface treatment technology, with the whole process of dry grinding construction as a significant feature, through a series of complex processes, the ordinary concrete floor is treated into a real marble-like luster and hardness of a floor. Tempered floor is an upgraded product of concrete sealed and cured flooring, which fundamentally improves its backward construction technology and improves the product performance to a new level. The tempered floor is delicate and moist in appearance, beautiful and generous, extremely high hardness, excellent wear resistance, easy to maintain, and the life can be equivalent to that of concrete foundation, especially suitable for machining workshops with high load requirements and frequent use.

Tempered floor process: (clean the base surface, grinding, cleaning, construction floor steel Li Xi keying agent, cleaning the base surface, preliminary polishing, comprehensive polishing) clean the surface of the base layer, remove floating ash, oil and other substances that are not conducive to bonding; If there are too many potholes in the old base, they need to be repaired in advance; Measure the amount of floor tempering agent according to the construction area. Pour the floor tempering agent evenly on the ground, and the land blind will flow freely to infiltrate, and at the same time, you can use a trowel to gently scrape the whole ground to evenly penetrate, observe the compactness and penetration of the base surface, and paint the ground.

After the substrate penetration reaction is complete (it is better that the surface moisture is not completely dry), use a professional floor cleaning machine to clean the surface and remove excess material. 24 hours after completion, the base surface is polished several times with resin grinding discs. The longer you use it, the better the gloss.

Tempered flooring is widely used, such as: industrial workshops, workshops (food factories, beverage factories, warehouses, machinery workshops, printing workshops, electronics factories, breweries, paper mills, logistics centers, underground garages, hardware and mechanical workshops), pharmaceutical workshops, large supermarkets, parking lots, airstrips, sports centers, docks and other places. It is suitable for old concrete floors and cement mortar floors that are easy to ash and sand, corundum wear-resistant floors and terrazzo floors that need to improve strength and hardness, and newly constructed raw slurry calendered concrete floors, emery wear-resistant floors, terrazzo floors, etc.

The dry grinding process of tempered floor (standard concrete strength) uses polymer repair mortar to repair potholes and cracks in the ground. Use alloy 30 sheets to remove loose and polluted layers from the concrete surface. Use 60 alloy sheets to further level the ground.

The potholes on the surface of the ground concrete are repaired with polymer repair mortar, and the cracks are repaired with high-strength epoxy resin. (Cracks and potholes with a width of less than 2mm, a diameter of less than 15mm, and a depth of less than 5mm do not need to be repaired.) Use 50 diamond resin grinding discs to grind, horizontal and vertical cross grinding once.

Spray the tempering agent mixed with water and brush until saturated. During the consolidation time of the tempering agent (2-4 hours), vehicles and pedestrians are not allowed to step on the site. Use 200 diamond resin grinding disc to remove the cementing residue of the toughener on the concrete surface.

Use 400 diamond resin grinding discs to grind, horizontal and vertical grinding once. Grinding with 800 diamond resin grinding discs and grinding once transversely. Use 1500 diamond resin grinding discs to grind the orange, and let the remaining vertical superposition grind once.

Use a large polisher with a frank roll polishing pad for polishing.

The workshop does floor paint according to the function of the division:

1. Pure functionality.

If the factory only requires the ground to be wear-resistant, compression-resistant, non-sand and dust-free, durable, and have a certain anti-corrosion ability. You can choose emery flooring, and concrete sealing curing agents.

2. Functional and decorative.

If the factory has decorative requirements for the floor, such as requiring green flooring, or yellow line zoning. You can only choose epoxy flooring. According to the different requirements for the degree of wear resistance, or there are special requirements for the ground, the following options can be made:

1. Mainly walking, no heavy-duty mechanical walking. This allows the option of an epoxy flat floor (epoxy thin coat floor).

2) There are often heavy machinery walking, which has requirements for wear resistance and compression resistance. This necessitates the choice of epoxy mortar flooring.

3) High requirements for interior decoration. This allows you to choose between epoxy self-leveling flooring or colored sand flooring.

4) There are anti-static requirements for the ground. This allows you to choose between anti-static flooring and is available in plain and self-leveling versions. Such as garment factories and telecommunications rooms.

5) There are strict requirements for ground anti-corrosion. Epoxy resin anti-corrosion flooring is an option.

The above is provided by Seven Star Floor Paint, which has been in production and construction for 18 years, I hope to help you!