How to clean putty and what is putty ash? How does it work?

The putty is soaked in water for about 10 minutes, and then brushed back and forth several times with a brush to remove the putty on the clothes.

If it is on a hard object, it is very hard after the putty dries. It must be removed with a shovel and then sanded, first with coarse sandpaper and then with fine sandpaper so as not to damage the object.

Putty is a kind of polymer material, composed of two parts: the main ash (base ash) and the curing agent, the main body ash is mostly composed of unsaturated polyester resin and filler, and the composition of the curing agent is generally an initiator and a plasticizer, which plays a role in initiating polymerization and enhancing performance.

This ability to adhere to the surface of a substance and quickly prototyping makes it particularly suitable for surface coating applications, such as automobiles, ships, furniture and other industries.

Precautions: 1. It is strictly forbidden to mix solvents such as "Tianna water" to reduce the viscosity of the coating and scraping, otherwise it will cause blistering, denting, cracking and other phenomena of the coating, but you can use Tianna water to clean the coating and scraping tools. If you need to reduce the viscosity of putty, you need to purchase a matching putty resin from the manufacturer to adjust.

2. Cover immediately after use, and it is strictly forbidden to put the used putty into the original container.

3. Putty curing agent is a dangerous chemical, and putty must be stored in a cool place, away from heat sources, sunlight, backlog, collision, etc.

4. In the process of use, storage and transportation, the relevant national safety laws and regulations should be observed, and the eyes should avoid contact with the product or inhale its vapor, and it is best to wear safety goggles and protective gloves.

5. The effective storage period of general putty is six months from the date of production, and three years for special purposes.

It is a kind of putty, which is divided into two parts. It should be used in secondary parts.

Solid wood furniture, low lacquer, the material used to fill after the first process, I know so much.

PuttyColloquial namePuttyIt is mainly to fill and modify defects such as pits and needle shrinkage holes, cracks and small welds of the substrate to meet the smoothness and smoothness of the surface of the substrate before the topcoat. Putty is a polymer material consisting of a body ash (base ash) and a curing agent.

It is composed of two parts, the composition of the main ash is mostly unsaturated polyester resin and filler, and the composition of the curing agent is generally an initiator and a plasticizer.

It plays a role in initiating aggregation and enhancing performance.

English name: poly-putty base, is a new type of embedded material with rapid development, which can adhere well to the surface of the object and does not produce cracks in the drying process.

Types of putty:

According to the different performance requirements of different industries, putty can be divided into automotive repair putty, special putty for manufacturing plants, furniture putty, sheet metal putty (alloy putty), high-temperature resistant putty, electrostatic putty, red ash (eyefill ash), fine-scraped putty, weld putty, etc.

and traditional putty in our country such as tung oil putty, perchloroethylene.

Compared with putty and alkyd putty, putty has fine gray matter, easy to scrape, easy to fill, easy to polish, fast drying speed, strong adhesion, high hardness, not easy to scratch, and flexible.

Good heat resistance, not easy to crack and blister, short construction period and other advantages, in various industries, putty has almost replaced other putty.

The above content reference: Encyclopedia - putty.

Is it the white putty that has just been dug out of the bucket or the yellow putty that has been cured after it has been proportioned?

If it's white, you bubble it with hot water and wash it with soap. If it is yellow, it belongs to the solidified putty, you rub it slowly, and it will often fall off by itself in time, but there will be traces.

1. Buy tickets in advance, [domestic flights] may be cheapest to book 30 to 60 days in advance, that is, one month before departure. At this time, it is the time for domestic flights to centrally monitor the order issuance rate, and the ** price reduction adjustment will be made to ensure that the tickets can be sold out. [International flights] are booked about 170 days in advance, which is 5 to 6 months in advance.

Thursday to Monday is probably the cheapest combination of international airlines, 20% cheaper than other time slots.

2. Always pay attention to the official website of the airline, ** air tickets and preferential activities will be released on the airline's official website for the first time, which is not available in other ****. In addition, airlines typically have quarterly promotions and annual promotion days, and low-cost carriers** are more frequent than traditional airlines.

3. Use multiple ** to compare prices, and use price comparison ** to improve efficiency when you are very sure of your destination and travel time. But at least look at two price comparisons** to find the lowest price.

4. Choose low-cost airlines, some airlines' tickets are cheap even if they are not, which is what we call "low-cost airlines". But many people have a misunderstanding about low-cost airlines and feel that they are not safe. The reason why low-cost airlines are cheap is because their services need to be purchased separately, and the threshold for "refund, change, and rebooking" is relatively high, and all you give is a ticket + tax + aircraft fuel.

Spring and Autumn, auspicious, and airAsia are all well-known low-cost airlines.

5. Pay attention to the membership days of major airlines, all major airlines have their own membership days, and the air tickets on this day can almost reach the lowest on the whole network.

The chemical properties of carbon are stable and not easy to wash off, so wipe with dilute hydrochloric acid.