Is there any way to make water based paint dry quickly?

1.It can be baked, after spraying the paint, and after it is slightly cured, it will be placed in the paint baking room for baking, so that the surface forms a protective film.

2.in water-based paint.

A certain amount of UV curing agent is added to it.

3.Use microwave tumble dry.

4.It is dried by ultraviolet light.

If you accidentally stick the water-based paint to the clothes, we can immediately rinse it with clean water, the area on the clothes is not particularly large, and you can basically wash it with clean water.

If it has solidified and occupies a relatively large area, we can use detergent to scrub, first soak it in water to soften it, and then use a professional detergent to clean, this detergent can react with water-based paint, thereby disintegrating and melting water-based paint, and then rubbing it with soap can be washed clean.

If you accidentally stick the water-based paint to your hands, rinse it with water immediately. But if you accidentally splash it in your eyes or stick to it, especially your eyes, you need to clean it with plenty of water, and it is not comfortable, so you need to go to the hospital to see it.

A small amount of curing agent can be added to it, which will dry faster, and the key is to control the dosage, according to the ratio of 5%.

Fan blowing, or bake with a small sun.

It is important to make the water-based paint dry quickly and ventilate, in addition, we can choose to spray the paint when the climate is dry.

What is the way to make the water-based paint dry quickly, this can only keep the ventilation and go to blow the ground with a fan.

1. Wetting agent.

Wetting agents for water-based coatings are divided into anionic and non-ionic types. The combination of wetting and dispersing agents can achieve the desired results. The amount of wetting agent is generally a few thousandths. The negative effect is to foam and reduce the water resistance of the coating film.

2. Dispersant.

Dispersants for latex paint are divided into four categories: phosphate dispersants, polyacid homopolymer dispersants, polyacid copolymer dispersants and other dispersants. Other dispersants, such as AMP-95, have a chemical name of 2-amino-2-methyl1-propanol.

The amino group is adsorbed on the surface of the inorganic particles, and the hydroxyl group extends into the water and stabilizes through steric hindrance. Due to its small molecule, steric hindrance is limited. AMP-95 is primarily a pH adjuster.

There are many dispersants that have been specially developed for waterborne industrial coatings, suitable for the dispersion of organic and inorganic pigments, and have good water resistance.

3. Defoamer.

There are many varieties of traditional water-based paint defoamers, which are generally divided into three categories: mineral oil defoamers, polysiloxane defoamers and other defoamers.

Mineral oil defoamers are commonly used in flat and semi-glossy emulsion paints. Traditional water-based paint defoamers are incompatible with water to achieve the purpose of defoaming, so they are prone to coating surface defects. This molecular-grade defoamer uses super-grafted astropolymers as incompatible surfactants and has achieved excellent results in waterborne coating applications.

Water-based paint quick-drying agent, water-based paint drier.

Driers, also known as dry materials, are organometallic compounds that can be soluble in organic solvents and resins. Chemically speaking, it belongs to the category of metal soaps, and adding to unsaturated oils and resins can greatly reduce their drying time. Driers can not only effectively speed up the drying speed of coatings, but also have a great impact on the properties of the paint film, such as hardness, adhesion, water resistance, weather resistance, yellowing and durability.

With the increase of people's awareness of environmental protection, the formulation of laws and regulations to limit VOC (volatile organic compound) emissions, and the shortage of petroleum energy, traditional solvent-based coatings are increasingly challenged, and the trend of water-based coatings is becoming more and more urgent. The research of waterborne alkyd coatings has received extensive attention, and the application of driers in waterborne alkyd coatings is a research focus. The oxidative crosslinking process of waterborne alkyd coatings is basically the same as that of traditional solvent-based coating systems, and the drier can significantly accelerate the oxidative crosslinking process.

However, due to the presence of a large amount of dispersion medium water, as well as the influence of neutralizers and surfactants, it will bring many new problems to the performance of coatings.

Alkyl acid metal salts, such as cobalt salts, zinc salts, etc., are commonly used. Zhebo helps you!

Water-based paint is the most commonly used material in decoration today, which is not only convenient for construction, but also has good decorative effect. However, the paint has a sticky attack, and it is often done in the construction that it should not be changed, so what to wipe off the water-based paint when it dries? What are the precautions for water-based paint construction?

Depending on the situation, if you get a matte marble floor, use a shovel directly. On the bright marble or wooden floor, only secondly, if the clothes are stained with water-based paint, you can rub them with detergent and then rinse them with water; Finally, if your hair or ** is stained with water-based paint, you can wash it with plenty of soapy water and seek medical attention.

What are the precautions for water-based paint construction?

1. Before the construction of water-based paint, it is necessary to operate in accordance with the steps of the product manual, stir the water-based paint evenly according to a certain proportion, and find that the viscosity of the water-based paint is too high during the mixing process, you can add appropriate water, and the general amount of water can not exceed 10%, pay attention to adding water on one side. Stir while making sure the water-based paint is even.

2. Before the construction of water-based paint, the basic surface of Brother Sun Shout should be cleaned, and there should be no gray sand, oil stains or original old paint, otherwise it will affect the effect of water-based paint.

3. The construction of industrial water-based paint generally needs to be sprayed twice, and when spraying the second time, it must wait until the first time should be dry and infiltrated before spraying, and the interval between the two times generally needs about 24 hours. The paint film can be self-drying, or it can be dried at low temperature. When drying, the temperature is not lower than 60, and the time is not less than half an hour.

4. At the end of the construction of water-based paint, all construction equipment should be rinsed clean to prevent solidification and drying. For the remaining water-based paint, it should be sealed and stored, and if there is dry skin, it will affect the use.

Summary: The above is the introduction of what to wipe off the water-based paint when it is dry and what are the precautions for the construction of water-based paint, I hope to help friends in need, if you need to know more about the relevant knowledge in the later stage, welcome to pay attention to Qeeka Home.

<>1. The water-based paint on the clothes can be washed with water and then dried with a rag. 2. If the hair or ** is stained with water-based paint, it should be rinsed immediately with a large amount of soapy water and water, and then dried with a dry towel. 3. The nylon fabric is stained with water-based paint, which should be rubbed repeatedly with detergent, and then rinsed with water.

4.If the wooden floor is stained with water-based paint, you can apply a damp rag for a period of time, and then wipe it slowly, and scrape it clean with a hard dry cloth through the cloth.

Paint will definitely be used when decorating a house, but the types of paint are different, there are many types of paint for us to choose, such as quick-drying paint is one of them, fast-drying paint as the name suggests is that the drying time is faster than ordinary paint, thenQuick-drying paintWhat are the ways to use that? What are the brands of fast-drying paint? Let's introduce it to you.

First, the use of fast-drying paint.

1.Whether it is painted on steel or furniture, the premise is to polish it. Make sure that the surface of the coated stool stall is clean and flat, free of oil, rust, water stains, dust, etc., and then gently wipe it with alkyd quick-drying paint thinner.

2.The next thing is to paint, due to the viscosity of alkyd quick-drying paint, the paint brush can not be brushed at all, here you have to add a special fast-drying thinner to dilute. Adjust to the viscosity of the paint is more appropriate, and the brush is effortless to dip the paint.

When adding the thinner, stir well and let it stand for 10 minutes to mature.

3.After debugging the paint, it is necessary to paint the paint, and the paint film should not be too thick, otherwise it will sag, and it is easy to crack after drying. It is generally recommended to paint both sides, wait for 1 to 2 hours after the first brush and then brush the second time, it takes 6 hours to do it, and the paint film should be protected from damage.

Second, the brand of fast-drying paint.

1.China Resources. Founded in 1991, China Resources is located in Shunde, the coating capital of China.

The brand has successively won many honors such as "China Brand Production", "National High-tech Enterprise", "Top Ten Paint Brands in 2017", "China Environmental Labeling Products", and its good reputation has won the love of Fangda consumers.

2.Dulux.

Luxe is a brand of the British ICI Group. As one of the Fortune Global 500 companies, the brand has won consumers and the market by "controlling the production of counterfeit and shoddy products" and "maximizing work efficiency". China's first-line paint brand.

3.Three trees.

As a leading brand of healthy paint in China, 3Trees Paint is one of China's top 500 most valuable brands. It is the first to advocate the concept of "healthy paint" in China. With health quality, professional service and brand strength, it has been recognized by the industry and consumers.

4.Nippon. Nippon Paint (China Famous Trademark, Japanese Brand, Top Ten Paint Brands) Nippon Paint is a famous paint manufacturer, founded in 1881, has a history of more than 100 years, is one of the early paint companies.

Founded in 1962, the Group is responsible for managing Nippon Paint's business activities in Southeast Asia, covering 12 Asian countries, establishing more than 20 manufacturing plants and employing more than 6,000 people.

Paint is generally more common in decoration, and its role is also very large, not only to decorate the house but also to protect our imitation of the wall, so what are the use methods and brands of quick-drying paint, through the above introduction, we also understand these.