Is there a benefit to flashing What are the disadvantages of flashing

Flashing is a system upgrade or replacement of a third-party system on the device, which will not affect the hardware of the phone.

However, the flasher will erase all personal data of the device (it will not affect the memory card data), so it is recommended to back up the relevant data before flashing.

There are mainly the following reasons why flashing your phone may cause damage to your phone:

1.The camera cannot be connected after flashing, the touch screen is not sensitive, and the handset is invalid.

This situation is not the damage of the hardware, but the imperfection of the third-party system itself, resulting in the inability to call the hardware facilities of the mobile phone normally. At this time, you only need to choose another ROM that is more stable and complete. Comparatively speaking, the stability of the official system is higher than that of the third party, as it is recommended to use the official system.

2.There is no signal after flashing, the signal is poor, and the wifi cannot be used.

This situation is also not hardware damage, some mobile phones need to be flashed before the corresponding baseband or other situations can be brushed, such as Samsung needs to back up IMEI before flashing, etc. In this case, the user only needs to refer to the corresponding tutorial according to the specific situation.

3.The font library is corrupted.

This is now found that the most flashing to the mobile phone caused substantial damage, this situation is because of improper flashing operation, etc., resulting in the mobile phone font damage resulting in the mobile phone can not be turned on, font damage can only be repaired by professional maintenance personnel.

4.The phone gets bricked.

For flashing, the probability of occurrence actually depends on the operation. Before flashing, you should carefully and strictly follow the flashing instructions or tutorials, and at the same time, you should understand the relevant content of the model, such as preconditions, etc., before flashing, so as to brush the machine on the basis of certain basic knowledge.

Many users may just be stuck on the first screen or other situations after flashing, etc., at this time, there is no need to be nervous, the mobile phone may just be a system failure, which is commonly known as "half a brick" or "fake brick". Please refer to the corresponding tutorial of the corresponding model to save the bricks.

If the mobile phone cannot be turned on, the computer cannot be recognized by the computer, and the charging cannot be charged, the mobile phone may become a real brick, and you can only turn to professional maintenance personnel for help.

Flashing method steps:

Card swiping: Use memory cards (SD, TF, etc.) to flash the machine, card swiping process:

3. Shut down, remove the SIM card, install the memory card, and it is recommended that the important things in the memory card should be backed up.

4. When shutting down, press the power button and the volume plus button at the same time, about ten seconds, and then let go.

5. Enter the recovery mode, i.e. REC mode.

6. Select Wipe Cache Partition to clear the cache.

7. After clearing the cache, select Wipe Data Factory and restore the factory settings.

8. Select "Install Zip from SDCARD", the power button is OK, then select Apply SDCARD:update, and the power button is OK, that is, select the flash package from the memory card to flash the machine, and wait patiently for it to be completed.

Flashing is the meaning of root permission,After root, you can have the highest authority on your phone,The popular point is that you can delete any software that comes with your phone,But the risk is that it can not be guaranteed,It is easy to get into the virus,It is recommended to remember to install antivirus software after root,

Some. Flashing the phone is equivalent to a deep recovery of the factory system, which can solve many mobile phone problems caused by software problems, such as sudden bad signal, low voice for no reason, and inability to access the Internet. However, flashing the phone may cause the phone system to be unstable and risky, but it is good to try a few more times, and you can also find maintenance personnel to help.

Flashing can restore your phone's original speed. But a lot of caches, as well as ** and the like, are formatted.

The disadvantages of flashing are:

1. After flashing, the camera may not be connected, the touch screen is not sensitive, and the earpiece fails.

2. There is no signal after flashing, the signal is poor, and you can't use wifi, etc.

3. Font damage, which is now found to be the most substantial damage to the mobile phone, this situation is due to improper operation of the flash, etc., resulting in the damage of the mobile phone font, resulting in the mobile phone can not be opened and closed, and the font damage can only be repaired by professional maintenance personnel.

Flashing is to upgrade the system of the device or replace the third-party system, which will not affect the hardware of the mobile phone car. However, the flasher will erase all the personal data of the device, and the memory card data will not be affected, so back up the relevant data before flashing.

You must have heard of such a word, which is called flashing. Is it a machine that can be brushed or something? Or what machine will be brushed again? So what exactly does flashing mean? Let's take a look!

What does it mean to flash the machine.

Flashing is a technical term for mobile phones. In layman's terms, it is to change the memory or operating system of the phone through some methods. In fact, flashing can make the phone's functionality more complete.

For example, if the memory of the mobile phone is very small, the memory of the mobile phone can be changed by flashing, so that the mobile phone can run faster. The phone will not be as stuck when you use it, and it can store more things at the same time.

Under normal circumstances, when the Android phone system is damaged and cannot be turned on or the blue screen is blue, it can be solved by flashing the phone. To put it simply, flashing is to reinstall the system on your phone.

Although flashing can restore the phone to its original state, in fact, there are still a lot of instability and risks in flashing. There are many mobile phones that will be factory reset after flashing, causing more troublesome and difficult to solve problems.

Therefore, it is not recommended to flash the phone by yourself, and the mobile phone that has caused problems by brushing the phone by yourself will not be warranted, even if it is still within the warranty period, it will not be warranted, because it is considered man-made damage.

And there is currently no official flashing software, try not to flash your own phone. If there is any problem because of self-flashing, you need to bear it, so the gain outweighs the loss.

2011-10-28 2:00:35

Flashing is to upgrade the software of 4 to 7 machines for 4 or 3 levels, or to install a t of some such as game software, etc. Flashing is actually done by installing k software on the computer. Of course, the Hand 4 machine is connected to the P computer through the connection cable, and not S is done directly on the Hand 4 machine.

So 4 simply put, flashing the machine is through the pst software installed on the computer, and the software that will be upgraded to 5 levels, such as 16R, is installed on the hand 8 machine. En brush machine is actually to replace the hand 8 machine operating system similar to us to install the computer system a c like 5 a n sometimes we buy the water 6 goods hand 1 machine, if it is English 2 operation interface will be flashed into the 2 text 8 of 4 sometimes, there is a new version of the operating system, but also j can 5 flash the machine to install a new system 8 to buy the machine v system is not satisfied, than 4 such as the mobile heart 7 machine wants to brush into an ordinary machine If the machine m is easy to use, there is no need to brush f, brush up also a risk 5 risk, can only hand 0 machine, Let's take a look at the Q smart hand 1 machine yourself.

1. I want to experience the new features of the new system, flash the machine.

2. If you want to get the optimization function of the third-party ROM, such as sliding more smoothly and other functions, flash 3, when the mobile phone is always frozen, error, software can not be used and other incurable diseases, brush disadvantages: for a veteran, is there a disadvantage to the brush opportunity? If you insist on saying it,It's going to take some time.,In addition, because the data must be cleared when flashing,The previous user data will be lost.,It's equivalent to going back to factory settings.。。。

If the backup is good, there is no such trouble, and user data can be restored.

However, it seems that there is no software to back up the game's save yet, and this is bound to be lost.

Flashing is like changing your computer's operating system. The higher the version, the better. (Actually, it's good to be suitable) has both configuration compatibility and risk. If it becomes a brick font library is broken. That's a lot of money.

There is no problem with flashing, it is normal, that is, from the installation of a set of programs. It's a normal thing.

To put it simply, there is no obvious drawback to flashing the phone, but if you brush the wrong model, it may cause the phone to not turn on or become bricked. Generally speaking, flashing the machine is to upgrade the system, as well as restore the system, and there is no problem in theory. If you want to flash the machine, it is recommended to use the line brush.