How to set up Mercury 11N wireless broadband router MW310R

Home Network Environment Cabling]:

1. There is a cat (modem): cat (modem) - router WAN port; The LAN port of the router --- a computer.

2. No modem: network cable --- router WAN port; The LAN port of the router --- a computer.

Computer enters the router]:

1. The computer IP and DNS settings are automatically obtained.

2. Open the browser, enter the general router address in the address bar is this or check the login information on the back of the router) Enter the route - enter the user name and password, (the default is generally admin).

Set Router Dialing]:

1. In the [Setup Wizard], select [PPPoe Dialing] (some are ADSL Dialing), enter the Internet user name and password according to the prompts, and save.

2. In [Network Parameters] --WAN Settings], select [Normal Mode], and select [PPPoe Dialing] in the three options of [Connection]. The next step is to select [Auto Connect], Save, and Exit.

Turn on the router's wireless function].

1. Select Wireless Settings --- Basic Settings.

2. Check [Turn on wireless function] and click Save.

Set wifi password].

1. Wireless Settings - Wireless Security Settings - Select [WPA-PSK WPA2-PSK].

Authentication Type: Automatic.

Encryption algorithm: AES.

The PSK password is the wireless password. Set the required password.

Enter the router through the default address and username and password, find the setup wizard option, and follow the prompts to set up the router according to your own Internet access method. It's simple! The Home Dummies router doesn't need to set too many parameters, and it can just let you surf the Internet.

The management interface of Mercury and DLINK is generally If it doesn't work, you can look at the back of the machine There is a setup wizard after entering, which generally requires ADSL username Wireless SSID, password It is recommended to use WPA2 PSK algorithm AES After setting up the search signal, find the SSID and enter the password.

<>1. Power on the wireless router first, connect the network cable from the LAN port of the wireless router to the computer, and automatically obtain the local connection IP address and DNS settings;

2. Enter in the browser of the computer: to open the login interface of the router - enter the correct login password, you can enter the setting interface of the Mercury MW310R, as shown in the figure below.

3. In the settings page of Mercury MW310R, click in turn: Advanced Settings - Wireless Settings - Master Network These 3 options are opened, and in the page that opens, you can reset the wireless password (WiFi password), as shown in the figure below.

4. If you want to avoid WiFi being rubbed by others, then the wireless password is best used: uppercase letters + lowercase letters + numbers + symbols, and the length of the password should be greater than 8 digits.

5. The wireless mode can choose 11B G N mixing, the wireless mode can choose 11A N AC mixing, the channel can be selected automatic, and the bandwidth can be selected 20 40MHz.

6. Finally, click Save, restart the router, and complete the settings.

The configuration of Mercury MW310R wireless router is simple, but for users who do not have a network foundation, it is still difficult to complete the installation of the router and configure the Internet parameters.

1. Log in to the management interface: open the browser on the computer, then enter "and press the enter key" in the address bar, enter the username and password in the pop-up dialog box (both are admin by default), and click "OK".

2. Run the Setup Wizard: The "Setup Wizard" interface will automatically pop up when you log in to the configuration for the first time, if it pops up, you can click the "Setup Wizard" in the left menu to activate it - >Next".

3. Choose the Internet access method: Please choose according to your network access method, at present, most of the Internet access methods provided by domestic ISP broadband operators for ordinary users are "PPPoE (ADSL virtual dialing)", and this example is also demonstrated in this way. (ps：

If you are not sure how you can access the Internet, please consult your broadband operator).

<>5. Wireless settings: "Wireless status" select "On" - SSID "User Defined Settings - >Wireless Security Options" select "WPA-PSK WPA2-PSK" - PSK password (that is, the verification password for connecting to the wireless network), user custom settings - > click "Next".

6. Restart the router: Click "Restart".

After the MW310R wireless broadband router is rebooted, the Internet access parameters and wireless network just configured will take effect, and users can connect to the MW310R router to access the Internet by wired or wireless.

<>1. Power on the wireless router first, connect the network cable from the LAN port of the wireless router to the computer, and automatically obtain the local connection IP address and DNS settings;

2. Enter in the browser of the computer: to open the login interface of the router - enter the correct login password, you can enter the setting interface of the Mercury MW310R, as shown in the figure below.

3. In the settings page of Mercury MW310R, click in turn: Advanced Settings - Wireless Settings - Master Network These 3 options are opened, and in the page that opens, you can reset the wireless password (WiFi password), as shown in the figure below.

4. If you want to avoid WiFi being rubbed by others, then the wireless password is best used: uppercase letters + lowercase letters + numbers + symbols, and the length of the password should be greater than 8 digits.

5. The wireless mode can choose 11B G N mixing, the wireless mode can choose 11A N AC mixing, the channel can be selected automatic, and the bandwidth can be selected 20 40MHz.

6. Finally, click Save, restart the router, and complete the settings.

1.First of all, if there is a wireless router, then first turn on the power supply, then plug in the network cable, plug in the WAN port, and then plug in the LAN port of the network cable connected to the computer, after doing these things, then you will see that there is an address and account password behind the router, after connecting, enter the address you see in the router in the browser, generally of course, if you are using ** online network, then you have to prepare an additional modem, commonly known as "cat").

2.Then enter, enter the corresponding account and password, generally the new ones are admin

3.After entering the operation screen, you will see a setup wizard on the left, Attack on the entry (usually it pops up automatically).

4.Enter the setup wizard interface.

5.Click Next, enter the Internet access method settings, we can see that there are three Internet access options, if your home is dial-up, then use PPPOE. Dynamic IP can be used by plugging the computer directly into the network, and there is a DHCP server on the upper layer.

The static IP is generally a private line or something, or it may be a cell bandwidth, etc., and the upper layer does not have a DHCP server, or wants to fix the IP. I chose PPPoE because I dialed.

6.If you choose PPPoE dial-up Internet access, you need to fill in the Internet account number and password, which should be understood by everyone, and there will be an account number to open broadband, and it is OK to fill it in.

7.Then the next step is to enter the wireless settings, we can see the channel, mode, security options, SSID, etc., generally SSID is a name, you can fill in as you like, and then the mode mostly uses 11BGNFor wireless security options, we need to choose WPA-PSK WPA2-PSK, which is so safe that it will not be hacked and rubbed by the network.

8.The next step is to set it up successfully.

9.Click Done, and the router will automatically restart, so be patient. The interface that appears after success.

Installation of routes.

The TPLink TL-WR740N has 4 LAN ports and 1 WAN port, which is marked with small English letters on the router's interface. The WAN port is used to connect the external broadband inlet network cable, and the LAN port is the connection between the intersection device and the computer. The blue ones are WAN ports, and the other four are LAN ports.

Routing settings.

Open the browser on the computer, enter in the address bar, and press Enter to appear on the login settings interface.

Generally, the default user and password are admin, and the router settings interface appears after entering.

The current router is generally installed after entering the password setting interface, after setting the password, you will enter the setup wizard, click the setup wizard in the upper left corner, click Next The following dialog box appears, select PPPoE (ASDL virtual dialing):

Enter your account and password, the general initial password has its default in each place, and you need to provide it from the network operation provider. After completion, continue to click Next, since the author's route is wireless routing, the following figure is about wireless routing, if you are not a reader who uses wireless routing, you can skip this step.

In the red line area, set up a wireless connection, which is the password for the wifi. If you don't set it, it's easy to rub the net.

Finally, click Next to restart the route.

Open the Setup Wizard and set the WAN port to automatically obtain dynamic addresses, and set the LAN port address to Subnet Mask.

The DHCP server is opened.

In this way, the WAN port of the wireless router is connected to the landlord's line, and your own computer can be connected to any other port.

Seeing you, now that you've used the router, don't use broadband dial-up Internet anymore. If you use broadband dial-up to access the Internet, you will naturally give up the routing function, you can set up the route and go directly to the Internet, and do not use broadband dial-up again.

It's set up like a normal router.

Does the cat connect to the wireless router, do you do this: plug in the wireless router, don't connect the cat first, connect the computer to any LAN port of the wireless router, enter the browser to enter the settings page, and set it according to the PPPoe (ADSL virtual dialing) method. Then set the SSID, encryption method, and password again.

Save, restart. After setting, connect the network cable from the cat LAN port to the WAN port of the wireless router.

What are you fighting with the gateway? Do you use a gateway?

Router Settings:

1.Go to the router, admin (computer address set to or.;

2.Set the Internet access mode (dial-up, static, PPPoe, configure IP address, gateway, DNS);

4.Restart' exit.

5.Configure the computer IIP address (automatically obtained or ).

It's as simple as that.

The Mercury MW310R router cannot set some wireless WiFi speed limits, only all of them.

2. Enter the correct username and password to enter the router management background.

3. We need to check the existing IP and the corresponding MAC address bar first. Click "DHCP Server" on the left, select "Client List", and write down the corresponding IP and MAC addresses displayed on the right.

5. Enter the correct corresponding MAC and IP address on the right, then select "Status" as "Effective", and then click the "Save" button to save.

6. Repeat the previous two steps until all IPs are added.

7. Click the "IP Bandwidth Control" link on the left, check the "Enable IP Bandwidth Control" checkbox on the right, and select the correct network speed below.

8. Then fill in the IP and bandwidth size to be controlled in the following rules, and also set your own computer "Guarantee minimum bandwidth", and select "Enable" for all, and then click the "Save" button to save all the settings.

Enter the IP you want to restrict in the IP segment, and enter the uplink and downlink speed limit below, and you can confirm it.

The steps to set up the Mercury router are as follows:

2. Then enter the login address of the Mercury router to log in to the background of the router.

3. Then set a login password.

4. Then click Quick Settings, and set your broadband account and password first.

5. Then set up the wireless wifi.

6. After the completion of the setup wizard, it can be used normally.

Tell you the easiest way.

After the computer is connected to the Internet, log in** and enter the administrator password, and you can set it up as you like.

It is recommended that you use a 360 router, which greatly enhances the ability to penetrate walls and the practicability of modern networks, and the signal is stable, and can be controlled directly on the mobile phone, which is simple and easy to use.

The steps to set up the Mercury router are as follows:

2. Then enter the login address of the Mercury router to log in to the background of the router.

3. Then set a login password.

4. Then click Quick Settings, and set your broadband account and password first. 5. Then set up the wireless wifi. <>

6. After the completion of the setup wizard, it can be used normally.