How to remove the door handle in the car, how to remove the door handle in the van

1. First of all, the central control button is unlocked, as shown in the figure below.

2. Use a flathead screwdriver.

Pry open the screw cover as shown in the figure below.

3. Use a Phillips screwdriver to remove the screws in a counterclockwise direction, as shown in the figure below.

4. Use a flathead screwdriver to remove the handle decorative shell and the screws inside, as shown in the figure below.

5. Then the screws should also be removed, as shown in the figure below.

6. After removing the screws, they can be easily disassembled, as shown in the figure below.

First, the method of disassembling the door handle in the car:

1. Disassemble the door decoration panel.

2. Pry open the decorative cover of the outer handle, pay attention not to hurt the paint, you can use a rag as a pad, and gently pry it with a small driver.

3. Remove the outer handle.

You can also go to the 4S shop to find a special master to help disassemble.

Second, to disassemble the handle to remove the fixing bolts on the side of the door, the headlights are more difficult to disassemble, you need to remove the front bumper, it is best not to disassemble yourself, no experience is easy to disassemble other things, the gains outweigh the losses.

The landlord, to remove the door handle, first have to remove the door guard, then remove the door protective film, tear the upper left corner, and then reach into the door cavity, remove the handle and the buckle of the door lock, and then remove the door handle screw from the side of the door, and finally, take off the door handle from the outside. Different models, the dismantling method is different, for reference only, if you really want to dismantle, it is best to find a professional 4S shop or maintenance personnel, because it is also divided into left and right front and rear doors, and the dismantling method is also different.

The inner door handle generally removes the door panel, and he gets down, what car are you? Generally, it is not recommended to remove the door panel by yourself, if you are not familiar with it, the hidden screws will not be removed, and if you forcibly remove it, the door panel will be damaged.

Use the word change cone to reach into the square hole, and then gently pry it open, so that the lock cylinder decorative cover can be taken out.

Door handle lock block screw dismantling, first disassemble the rubber pad, open the door, we can find this rubber pad by the door, use the word change cone to pry the rubber pad, and then we will find the door handle lock block screw, take out the T-20 spline, use the T-20 spline to disassemble the screw, and the screw rubber pad should be put away.

Xiaoxiong teaches you to change the handle inside the door in a few minutes by yourself, it turns out that simple.

1. First of all, the central control button is unlocked, as shown in the figure below. Sedan.

2. Pry open the screw cover with a flathead screwdriver, as shown in the figure below.

3. Use a Cross Squire screwdriver to remove the screws in a counterclockwise direction, as shown in the figure below.

4. Use a flathead screwdriver to remove the handle and the screws inside, as shown in the figure below.

5. Then the screws should also be removed, as shown in the figure below.

6. After removing the screws, they can be easily disassembled, as shown in the figure below.

Taking Wuling Hongguang as an example, the method of removing the door handle is as follows:

First, prepare a word to change the taper and a T-20 spline;

2. There is a piece of black gel in the door, which is used to cover the screws of the doorknob;

3. Gently break this small buckle with your hand, and then you will see the screws that fix the doorknob;

4. Take out the T-20 spline and remove the black screw on the right side of the door;

5. There is also a screw in the small hole on the left side of the door, use a T-20 spline to reach into the small hole and loosen the screw inside;

Sixth, then take out the word change cone, and use the word change cone to gently pry the small cover of the door handle and the lock cylinder together to pry a gap;

7. Then pull it out with your hand, and the lock cylinder and small cover will be removed;

8. Hold the doorknob with your hand and pull it back;

9. In this way, the door handle is separated from the car door.

Hello, the handle of the car hand-cranked window can be removed like this:

1.There are two kinds of car hand-cranked windows, the first is the outside of the handle, on your side, is a decorative cover, which can be pryed down with a slotted screwdriver to see the screws, and secondly, there is a circlip on the rotating shaft between the handle and the door decorative plate, which can be wrapped with a strip of cloth and pulled back and forth.

2.Finally, let's talk about its principle composition. The electric glass regulator for cars is mostly composed of an electric motor, a reducer, a guide rope, a guide plate, a glass mounting bracket, etc.

Due to the different materials or manufacturing methods of the guide rope, it is divided into three types of electric glass regulators: rope wheel type, flexible shaft type and plastic belt type. The first two are to use a wire rope as a guide rope, and the latter is to use a plastic belt as a guide rope.

3.Taking the commonly used rope wheel electric glass regulator as an example, it is composed of motors, reducers, wire ropes, guide plates and glass mounting brackets and other components, and the door and window glass are fixed on the glass mounting brackets during installation, and the glass guide groove is parallel to the wire rope guide plate. Turn on the motor, the motor drives the reducer to output power, pulls the wire rope to move the glass mounting bracket, and forces the door and window glass to move up or down in a straight line.

The guide rope of the plastic belt electric glass regulator adopts a plastic belt with holes on the belt to move and position the plastic belt to control the lifting of door and window glass.

4.Manual doors and windows are to replace the electric part of the electric door and window with a mechanical component, which is realized by hand-shaking the crank handle in the door.

The whole body of the window is designed to meet the needs of lighting, ventilation and the vision of the driver and occupants. The windows are installed according to the different positions of the glass: front and rear windshields, side windows and doors and windows.

The shape structure and quality of the window have a great impact on the driver's vision, the comfort of the passengers, the beauty of the appearance and the aerodynamic characteristics. The window structure is usually curved and closed, and is connected by a rubber sealing strip between the window frame of the car body and the window glass. The sealing strip acts as a seal and cushion to prevent damage to the windshield when the window frame is deformed by the force on the body.

This one is disassembled from the inside and requires professional disassembly tools, and personal disassembly is not recommended.

The left front or right front door outer handle is generally equipped with a door lock key barrel, and its removal method is as follows:

1) Remove the front door trim and front door trim moisture barrier film.

2) Unscrew the fixing bolts of the keytube trim cover (external handle cover) and remove the outer handle cover.

3) Remove the outer handle by sliding it back and pulling it out.

4) Detach the external handle connector (omit if there is an electrical connection, if there is none).

In this case, you need to use a special tool to reach into a place inside the card, and then pull the doorknob out and fall out.

For a person to achieve great things, he must achieve some small achievements every day.

Small achievements must be achieved every day, because big achievements are the result of the accumulation of small achievements.

The steps to remove the door handle are as follows:1. Remove the door guard, then remove the door protective film, and tear off the upper left corner of the protective film;

2. Reach into the inner cavity of the door and remove the buckle of the handle and the door lock;

3. Remove the door handle screws from the side of the door, and finally remove the door handle from the outside;

4. Replace the door handle with a new one and install it according to the opposite steps;

5. Verify after installation. The car door handle is a commonly used car accessory, which is connected to the car lock by the door lock lever and is used to open and close the car door. The shape and color of the door handle are varied, and they are often installed selectively according to the body color and vehicle model.

The door handle is a wearing part in the body accessories, and attention should be paid not to be too strong when opening and closing the door to minimize damage.