My HP printer can complete the test page, and it has been set as the default printer, why can t I pr

Landlord, you first take a look at this information: see if this is the case?

Method 1: Open Word, enter a line of things casually, print, if you can print it out, there is a problem with the file you printed.

If it still can't be printed, it's a problem with the printer.

Method 2: Click Print, find the properties, and click. Then find the option and click on the question answer in the properties. You'll be able to find the problem with your printer and it will tell you what to do about it.

Under the integration of the landlord's thinking, which one quickly went wrong? Set up? Drive? Permissions?

Try more, if you have any questions, you can send me a message Baidu!

Mine is the same, I did it according to all the methods, I just got a side I can type, but the font is green. Here's how: Start Setup Printers & Faxes Find the printer with the black tick and right-click Print Preferences Color mode color change to black OK.

Is it set to offline and reinstall the printer driver?

The HP printer test page is normal, and nothing else can be printed.

Hello dear <>

HP 2500 printer, can type the rubber test page but can not type other documents, the reasons are as follows: 1. If the printer cracks and the system is in conflict, replug the data cable, and restart the printer and the computer. 2. If the printer hardware is molded and closed, contact the after-sales service for detailed testing.

3. If there is a problem with the computer system, contact the maintenance personnel to install the original computer system, or replace it with other computers for testing. 4. If the computer printing service is not opened, right-click "My Computer", select the service and application, find the print spooler service, and select Start.

<>2.Locate the Control Panel.

Double-click to open it as shown below.

3.Under Hard Punch Shipments & Sounds, select View Devices & Printers.

4.Select the printer you want as shown below.

5.Right-click the printer to select the printer properties, as shown below.

6.Open the Properties panel and select TestPagePrinter as shown in the image below.

7.Complete the printing of the beam test page as shown in the figure below.

Hello, when the printer prints the test page, you are in the control panel.

Right-click printer properties on the Devices and Printers page.

You can't print other files, probably because you didn't select the printer you want to use when you opened the file for printing.

So if the printer is not sent to the printer normally, the printer will not work, for example.

<> you can right-click the printer as the default cooker to print the booklet, so that you don't have to select the printer to print every time.

1. First turn on the computer, click the start button in the lower left corner of the computer desktop, and then click the control surface of the god board, as shown in the figure below.

2. After that, in the page that opens, click on the device, as shown in the figure below.

3. After that, click on the printer and scanner, as shown in the figure below.

4. Then in the page that opens, click on the connected printer, and then click on Manage, as shown in the figure below.

5. Then you can see the print test page, click to print the test page.