What aspects need to be checked in the safety inspection of the Municipal Transportation Bureau

(A) whether the vehicle operation procedures are complete, including road transport certificates, route plates, and employee qualification certificates;

2) Safety management, station, vehicle safety testing platform is normal testing, incoming vehicle safety performance testing;

3) Door inspection system inspection, three-product inspection and blocking, safety inspection;

4) Whether the station implements the separation of people and vehicles, whether the separation fence is installed in place, and whether the vehicle is parked in a partition.

1. Check, clean and replace the filter element of the air filter to reduce the suction resistance of the engine, improve the air intake of the mixture, reduce fuel consumption and improve power, which is also cheaper.

2. Check and replace the spark plugs. Ignition in winter is a big problem, the ignition energy is low when the temperature is low, I don't love the car, it is best to replace the multi-pole spark plug, ** is not too expensive, good ignition, and the energy is much higher.

3. Check the free stroke of the clutch. After long-term use in summer, the clutch that is frequently pedaled should adjust the amount of free stroke to make it more accurate to use the clutch in winter.

4. Check brake fluid and clutch fluid. The brake fluid must be kept within the normal range, which is very important for the safety of the clutch fluid for winter driving.

6. Check the transmission system gearbox oil. For owners with fine maintenance, if you have time, you must check the lubricating oil of the gearbox, and replace it if the color is dark and no longer lubricated.

7. Check the differential oil of the walking system. This is the most overlooked part, which is generally not remembered, and it also has a lot of lubricating oil in it.

8. Check the tire pressure. The friction coefficient of the road surface in winter is low, the tire pressure should not be too high, but it should not be too low, the external temperature is low, the tire is brittle, the tire pressure is low, and the flexible tire can accelerate the aging seriously.

9. The tires exchange positions with each other. Because the car positioning has a certain camber angle, the middle of the driving road is high and the two sides are low, the internal and external wear of the tire is very different, in order to ensure safety and reduce wear, the tire should be changed regularly.

10. Check the liquid level and concentration of the battery. In winter, the days are short and the nights are long, and the driving time of cars in the dark is longer. The liquid level of the battery should be checked and kept within the normal limit to ensure that the storage of lighting power in the dark weather in winter is sufficient.

11. Clean and inspect the fuse box. Clean, inspect, and replace the fuse with potential problems in time, keep the fuse box clean, and avoid breaking down due to fuse problems when driving in dark weather in winter.

12. Check and replace the glass water in winter. In the environment below zero degrees Celsius in winter, the anti-freezing winter glass water should be replaced, or more simply, the appropriate proportion of alcohol can be added to the glass water to achieve the purpose of reducing the freezing point and anti-freezing.

13. Check the rubber wiper blades. In winter, the temperature is low, and the aging rubber wiper blades are stiff and unusable, so it is best to replace them at this time to ensure safety.

14. Check the backup lights and bulbs before checking. Checking and replacing blackened bulbs in advance can reduce the possibility of changing bulbs in winter.

(1) Whether the operating procedures for incoming vehicles are complete, including road transport certificates, route plates, and employee qualification certificates.

2) Safety management, station, vehicle safety testing platform is normal testing, incoming vehicle safety performance testing.

3) Door inspection system inspection, three-product inspection and blocking, safety inspection.

4) Whether the separation of people and vehicles is implemented in the station, whether the separation fence is installed in place, and whether the vehicle is parked in a partition.

5) Whether the bag detector is installed in the bus passenger station above the second level and whether it is in normal use.

The first is whether the operating procedures for the incoming vehicles are complete, including road transport certificates, route plates, and employee qualification certificates. The second is safety management, whether the station and vehicle safety testing platform is normal testing, and the safety performance testing of incoming vehicles. There is also a door inspection system, three products to check and block, and safety inspection.

There is also whether the separation of people and vehicles is implemented in the station, whether the separation fence is installed in place, and whether the vehicle is parked in a partition. Finally, whether the bag detector is installed in the bus passenger station above the second level and whether it is used normally.

In terms of service standards, I think it is to tidy up your own grooming and appearance, and you need to be patient with passengers when they encounter problems that passengers can't solve.

Whether the work is carried out in strict accordance with the standards and specifications, that is, whether the standards are strictly implemented (this can be checked by randomly sampling its test report, but the test report needs to be accurately grasped).

2.Whether the verification work is carried out in strict accordance with the standards and norms is also a way to randomly check the verification report.

3.Detect file specification issues: whether it is comprehensive, timely filing, etc.

4.Personnel issues: mainly to confirm whether the signatory is the authorized signatory, and whether it is signed on behalf of the signatory;

5.Regulations.

Wait. What should be the inspection and supervision of vehicle inspection sites in comprehensive traffic law enforcement?

Hello! Little Lemon will inquire for you, please wait a while.

Kiss! The comprehensive law enforcement of transportation and transportation shall respond to the inspection and supervision of vehicle inspection sites with the following contents: 1Whether the work is carried out in strict accordance with the standards and specifications, that is, whether the standards are strictly implemented (this can be checked by randomly sampling its test report, but the test report needs to be accurately grasped) 2

Whether the verification work is carried out in strict accordance with the standards and norms is also the way to randomly check the verification report 3Detection of file specification issues: whether it is comprehensive, timely filing, etc. 4

Personnel issues: mainly to confirm whether the signatory is an authorized signatory, and whether to sign on behalf of the signatory; 5.Rules and regulations: Wait.

Under what circumstances should the traffic management check the noisy vehicles, the vehicles are violated, the vehicles are suspicious, the suspected violations and crimes, and the card inspection can be carried out on the vehicles and drivers. According to article 9 of the "People's Police Law", persons suspected of violating the law or committing crimes, as well as their belongings and vehicles, may be interrogated and inspected in accordance with the law. People's Police Law:

Article 9: In order to preserve public security and order, the people's police of public security organs may interrogate and inspect persons suspected of violating the law or committing crimes on the spot upon presentation of the corresponding identification; In any of the following circumstances after interrogation or inspection, they may be brought to the public security organs, and upon the approval of the public security organs, they may continue to be interrogated: (1) They are accused of criminal conduct; (2) There is a suspicion of committing a crime at the scene; (3) There is a suspicion of committing a crime, and the identity is unclear; (4) The items carried may be stolen. The period of retention in custody for the person being interrogated is not to exceed 24 hours from the time it is brought to the public security organs, and in special circumstances, it may be extended to 48 hours with the approval of the public security organs at the county level or above, and a record of the interrogation shall be retained.

Where continued interrogation is approved, their families or their units shall be immediately notified. Where continued interrogation is not approved, the person being questioned shall be immediately released. Where, after continued interrogation, the public security organs find that it is necessary to take detention or other compulsory measures against the person being questioned in accordance with law, they shall make a decision within the period provided for in the preceding paragraph; Where the above decision cannot be made within the period provided for in the preceding paragraph, the person being questioned shall be immediately released.