The blue light of the router keeps flashing, and I can t connect to the Internet. How to solve it?

Check the wireless network like this: 1. Call the operator's customer service** to see if there is any problem with the external network. 2. Reseat the network cable once The network cable from the cat is connected to the WAN port of the wireless router, and the computer is connected to any LAN port of the wireless router.

3. Turn off the cat and the wireless router and turn them on, and take a look later. Fourth, if it still doesn't work, set up the wireless router again. Need to dial up the broadband cat to connect the wireless router and you do it:

Plug in the wireless router, don't pick up the cat first, reset the wireless router (restore the factory), connect the computer to any LAN port of the wireless router, enter the router gateway address in the browser address bar (on the label behind the router), enter the settings page, and set it according to the PPPoe (ADSL virtual dialing) method. Then set the SSID, encryption method, and password. Save, restart.

After setting, connect the network cable from the cat LAN port to the WAN port of the wireless router.

It should be a cat that connects to the optical fiber, not a router, you see if the cat will light up the red light, the red light may be an abnormal optical fiber signal, call ** to the operator and ask them to send someone to deal with it, if the light is normal, it may be a router setting problem, the router is broken, try to change it to a new router, or you reset the router.

You can try to power off the router for about two minutes, and then power it back on, or restore the router to factory settings, and then set it up, and there is basically no problem.

You say that the blue light of your router keeps flashing, and the connection is not connected to the Internet, if your router is the business hall, it may be that your router and the fiber optic cat are one. If there is a problem now, it should be a problem with your fiber optic cat, and it may be that there is a problem with the home line of your fiber optic cat, you can contact us first. The operator's customer service, let him check it.

The state of your home's fiber. If it's normal, I'm looking for the next one. You can also start the fiber modem from scratch first...

Let's see how it goes.

Method:

1. Reinstallnetwork card driver; 2. Upgradesnetwork card driver;

3. Open360 Security GuardFeaturesFirst aid kit when disconnectedComprehensive diagnosis

Summary. The telecom fiber router flashes blue light, indicating that the device has no data, which may be data loss or the carrier's equipment is disconnected.

Suggestions: 1. Restart the modem to try.

2. If you still can't access the Internet after restarting, it is recommended to call Telecom 10000 for repair and let the staff come to you for maintenance.

The blue light of the router is always flashing, and what is going on with not being connected to the Internet.

The telecom fiber router flashes blue light, indicating that the device has no data, which may be data loss or the carrier's equipment is disconnected. Suggestions: 1. Restart the modem to try. 2. If you still can't access the Internet after restarting, it is recommended to call Telecom 10000 for repair and let the staff come to you for maintenance.

Network issues. It may also be repaired and waiting.

It's connected, but it doesn't work.

Rebooted. Useless.

Network failure to call the operator for on-site repair free of charge.

Good good.

Use the computer to log in to the management interface of the router, check the system status of the router, whether the WAN library status shows that it is connected, if it does not show that it is connected, it means that the router is not set up and needs to be set again. Find the control button of the router and press the reset button for 5 seconds. Reset back to factory state.

Set up your router again. See if it returns to normal. Unplug the power cord of the router, disconnect it and plug it back in again to see if it returns to normal production.

Summary. The flashing blue light can only indicate that there is a device communicating with the port of the router, and we can restore the factory settings of the wireless router and re-debug it. The steps are:

1.First flip to the back of the router, then long press the "Reset" button and hold it for about 10 seconds.

The router flashes blue and can't get on the network.

The flashing blue light can only indicate that there is a device communicating with the port of the router, and we can restore the factory settings of the wireless router and re-debug it. The steps are:1First flip to the back of the router, then long press the "Reset" button and hold it for about 10 seconds.

Then enter the password of the router, different brands have different passwords, the following takes tp-link as an example, the password of the old router is admin. The new router is generally empty by default, and you need to set a new password by yourself.

Enter the background settings of the router, the font of the mobile phone screen is small, if you can't see clearly, you can double-click the screen to enlarge the interface. The steps below are exactly the same as setting up a router on your computer.

Open the setup wizard. 6.Follow the prompts and click Next, fill in the Internet broadband and password provided by the operator, and then set the wifi password.

You're talking about the light cat. This is a problem with the network, just call ** to report for repair, you can't solve it.

2. If the router is red and the modem is normal, the broadband payment may be in arrears.

3. Or the network cable from the modem to the router or the router is set up.

Log in to the background to see the WAN port, if the external network is disconnected, contact the operator.