Router AP mode Samsung 9300 keeps getting IP and finally fails to get internet 100

DHCP on the router is assigned a static address"Add the MAC address of the mobile phone (on the mobile side - wifi settings - advanced - set static IP - the IP of the gateway router).

Netmask. Mine is finally able to get on ... Share my settings, I can't help it.

Doesn't x mean casual...

AP is the abbreviation of Access Point, that is, (wireless) access point, it is equivalent to a switch in the wired network, in this mode, TL-WR700N is only responsible for connecting the device to the network, if there is no routing device in front of it, the mobile phone or computer cannot access the Internet through it, so it is best to set it to the routing mode, and the default DHCP under the AP is off

You just change your mobile phone IP all the time to: Also: the subnet mask and gateway are filled in according to the one on your notebook.

x"It's to replace it with any number in the range 2-254, rather than asking you to type this x into your phone's IP address.

I hope it helps, and if it helps, please remember.

Or do you want to change it to automatically get IP,Your mobile phone must be set up to connect to wireless first,Can't open the software and then connect to wireless,That may not be able to connect to wireless,I will do this when I use my mobile phone,I am now connecting the phone wirelessly first,Then open the software。

First, check whether the router is broken, and restart the Lubu infiltration device if the router is not broken. If you haven't used it yet, re-modify the protocol and password of the wireless Shizhi Land Device, and after resetting the Land Device, delete the network that the mobile phone has searched for first, and then re-link.

Two: wifi connection name (network name) as far as possible in English, or English plus numbers, not all in Chinese, it is best not to make punctuation marks and English mixed together, wireless router about wireless security settings have three encryption methods: (1) wpa-psk wpa2-psk (2) wpa wpa2

3）wep，。。Do not use the encryption method of WEP, please refer to the router instructions for the specific setting method. It is recommended to use WPA2 encryption or higher, and the password should be a combination of English and numbers.

3. Static IP setting method:

Open Settings - Wireless & Network - WLAN Settings, press the Menu button, enter the advanced options settings, and check "Use Static IP" in the IP settings. Then fill in the "IP address" in ", the general home uses wireless routing, the network segment is, and the range represented by the X value is between 2-255. Then fill in the "Gateway" field, or either the two gateways depend on the IP address of your wireless router.

netmask", and in domain name 1, domain name.

2", also known as the Domain Name System, is OK to fill in one, but it is OK to fill in two. Finally, press the menu button to save, and you're set.

Four: The rooted phone can turn off the wifi first, then open the RE manager, enter the root directory of the mobile phone system and enter the data misc dhcp

After deleting all the files under the DHCP folder, exit RE and restart the phone and connect to WiFi again

Welcome to the Samsung Digital Service Platform to ask questions.

I hope the above helps you and I wish you a happy work!