How do I make my own soda? How do you make your own soda?

Take a lemon, cut two to three thin slices and put it in a cup, and put the rest away in plastic wrap for next time.

Take a spoonful of honey (or sugar) and add it to a glass of water, the lemon is very sour, adjust the taste with sugar to make it sweet and sour. Honey white sugar can be adjusted according to your taste.

grams of baking soda. Baking soda breaks down to produce water and carbon dioxide, which fills the cup with carbon dioxide, which is the secret of soda.

Then pour in an appropriate amount to cool and boil. Hot is fine, but it's not as cool as adding it to cool to drink.

Immediately after stirring, close the lid and do not let the carbon dioxide escape.

Bring the water to a boil and place on a plate to cool naturally and set aside.

Rinse an old soda bottle and fill the empty bottle with cooled boiled water, which is about 81% of the bottle's volume.

Add an appropriate amount of sugar and a small amount of your favorite fruity flavor to the bottle.

Add edible sodium bicarbonate (baking soda) in a ratio of 100 to 2, stir gently with chopsticks, and quickly add citric acid in a ratio of 80 to 2 after the edible sodium bicarbonate (baking soda) is dissolved, and immediately tighten the bottle with a lid.

Put the cakes in the refrigerator to cool.

1. Pour in waterFirst of all, you need to go to a sealed bottle, pour a certain amount of drinking water into the bottle, and add edible citric acid.

2. Add baking sodaAdd baking soda to the bottle.

3. Close the lidClose the lid and shake the sealed bottle.

4. Add sugarAdd the sugar and shake again.

5. Pour into a glassPour the soda from the bottle into a glass.

6. The production is completedPut lemon slices in the rim of the cup, insert a straw, and a refreshing "homemade soda" is ready.

Homemade soda.

Ingredient formula (one bottle) baking soda grams citric acid (or tartaric acid) grams a little granulated sugar Juice to taste.

How to make Use a clean soda bottle, pour cold boiled water into the bottle, not too full, add some granulated sugar and a certain amount of juice. Then add grams of baking soda, and finally put grams of citric acid (or tartaric acid), immediately plug the mouth of the bottle with a stopper, and tie the stopper tightly with string or aluminum wire to prevent the soda from rushing out. Gently shake the bottle, a large number of bubbles will be generated in the bottle, and it will continue to tumble up and down, and it will be ready to drink after about 20 minutes.

If you sweat a lot, you can make salt soda instead of fruit juice soda, and the method is the same, just replace sugar and fruit juice with an appropriate amount of salt.

Just in case, it's best to wrap the soda bottle in a cloth when making soda.

How to make Baking soda and citric acid (or tartaric acid) are combined to produce a large amount of carbon dioxide, which is dissolved in water in large quantities under pressure. When drinking soda, the stomach and intestines do not absorb carbon dioxide, and carbon dioxide runs out of the mouth to take away a lot of heat, making people feel cool.

Coke-flavored soda.

Method: Use a clean soda or sparkling wine bottle, pour cold boiled water into the bottle, not too full, add a few saccharin (if possible, put some white sugar and a certain amount of juice) or salt. Then add a teaspoon of baking soda and finally a teaspoon of citric acid (or tartaric acid), and immediately plug the mouth of the bottle with a stopper, and tie the stopper tightly with a string to prevent the soda from rushing out.

Then put the soda bottle in the well water and ice, of course, now you can put it in the refrigerator, and when you want to drink, gently shake the bottle, the bottle produces a large number of bubbles, constantly tumbling up and down, you can drink it (Note: the amount of baking soda and citric acid can be determined according to the amount of water and your own taste, when there is more water or more bubbles, you can add a little more, less water or less bubbles, you can add less, generally in grams or so).

Pour two scoops of sugar into an empty bottle.

2 6 Then pour in a spoonful of baking soda.

3 6 Pour more than half a bottle of cold boiled water, do not heat the boiled water, the bottle will not be able to stand it.

4 6 Add a spoonful of citric acid at the end.

5 6 Quickly tighten the cap to prevent the gas inside from escaping.

6 6 Shake a few more times and leave for about 20 minutes before drinking.

The manufacturing steps are as follows:

1.First, you need to walk up to a sealed bottle, pour a certain amount of drinking water into the bottle, and add edible citric acid.

2.Add baking soda to the bottle.

3.Close the lid and shake the sealed bottle.

4.Add the sugar and shake again.

5.Pour the soda from the bottle into a glass.

6.Add lemon slices to the rim of the cup, insert a straw, and a refreshing glass of "homemade soda" is ready. Refrigeration will have a better effect.

First, homemade soda.

1.Bring the water to a boil and place on a plate to cool for later use.

2.Take an old soda bottle and rinse it well. Fill about 81% of the cooling water into the empty bottle.

3.Add an appropriate amount of sugar and a small amount of your favorite fruity flavor to the bottle.

4.Add edible sodium bicarbonate (baking soda) in a ratio of 100 to 2, stir gently with chopsticks, and after the edible sodium bicarbonate (baking soda) is dissolved, quickly add 80 to 2 citric acid, and immediately tighten the bottle with a lid.

5.Place the bottle in the refrigerator to cool.

Second, make your own soda with different flavors.

1.Watermelon fruit ice soda.

1) Main ingredients:

Sprite|200ml, ice cubes|6 pieces, homemade jam|2 scoops (you can substitute it with the jam you bought or your favorite fruit chunks), watermelon|Amount.

2) Exercises: 1Preparation: Carve the watermelon into your favorite shape with a mold, or cut it directly into pieces.

2.Add the jam first, then the Sprite, then the ice cubes, and finally the watermelon, and the fruity sweet soda is ready.

2.Lemonade.

Lemon Cola soda.

Ingredients: 20 grams of cola powder, 20 grams of coffee powder, 4 grams of citric acid, 3 grams of baking soda, 2 grams of caramel color, 2 drops of cola flavor, 150 grams of white sugar, 200 grams of purified water, 400 grams of boiling water, and a little crushed ice.

Method: Mix the kola fruit powder with the coffee powder first, put it in the pot, pour in clean water, boil, and keep it slightly boiling for 15 minutes over low heat; Keep away from the heat and keep it cold; Remove the slag and extract the juice. Then dissolve the white sugar and caramel pigment with boiling water and stir thoroughly.

Then pour in the cola and coffee mixture, stir while pouring, add citric acid at the same time, stir well, let cool and drop in cola flavor, and put it in the refrigerator to cool down.

Directions: Add crushed ice and baking soda to drink.

Protein orange soda.

Ingredients: 1 orange, 30 grams of lemon juice, 1 egg white, 200 grams of mineral water, a little baking soda.

Method: Pour the egg whites into a bowl and stir with chopsticks until the eyebrows are thickly bubbled. The oranges are then peeled and the juice is squeezed with an orange press.

Then pour in mineral water, stir well, add bubble egg whites and put them in the refrigerator to chill, add baking soda and stir when drinking.

Salt soda raw materials: 1000 grams of cold boiled water, 50 grams of white sugar, 25 grams of vinegar, 6 grams of citric acid, 4 grams of baking soda, 3 grams of fine salt, a little lemon flavor.

Method: Add white sugar, citric acid, vinegar, fine salt and edible lemon flavor to 950 grams of cold boiled water, stir well until the white sugar and citric acid are completely dissolved. Then use the remaining cool boiled water to dissolve the baking soda.

Finally, pour the two solutions together into a glass, seal it quickly, and put it in the refrigerator to cool down.

The steps to make a soda are as follows:

1. First of all, you need to go to a sealed bottle, pour a certain amount of drinking water into the bottle, and add edible citric acid.

2. Add baking soda to the bottle.

3. Close the lid and shake the sealed bottle.

4. Add white sugar and shake again.

5. Pour the soda from the bottle into a glass.

6. Add lemon slices to the rim of the cup, insert a straw, and a refreshing cup of "homemade soda" is ready, and the effect is better when refrigerated and then refrigerated.

The steps are as follows:

1. First of all, you need to go to a sealed bottle, pour a certain amount of drinking water into the bottle, and add edible lemon.

Citric acid.

2. Add baking soda to the bottle.

3. Close the lid and shake the sealed bottle.

4. Add white sugar and shake again.

5. Pour the soda from the bottle into a glass.

6. Add lemon slices to the rim of the cup, insert a straw, and a refreshing cup of "homemade soda" is ready, and the effect is better when refrigerated and then refrigerated.

Ingredients: Empty beverage bottle, 2 scoops of sugar, 1 scoop of baking soda, appropriate amount of boiled water, 1 inner spoonful of citric acid Step 1: Pour 2 spoonfuls of sugar into the empty beverage bottle.

Step 2: Then pour in a scoop of baking soda.

Step 3: Pour in more than half a bottle of cold boiled water.

Step 4: Add a scoop of citric acid at the end.

Step 5: Tighten the cap quickly to prevent the gas inside from escaping.

Step 6: Shake a few more times, leave for about 20 minutes and drink.

Ingredients: 3 slices of yellow lemon, 3 slices of lime, 50g cucumber, tonic water or Sprite 1 canopy Steps:

1. All the ingredients of the lemon and cucumber flavored soda. Lemons do not have the right to two, one can also be used.

2. Slice the lemon and remove the seeds.

3. Slice the cucumber.

4. Take out the refrigerated tonic water.

5. Add lemon slices and cucumber slices to a cup and pour in tonic water.

6. You can add ice cubes and you're done.

When edible citric acid (or tartaric acid) and baking soda (NaHCO3) are dissolved in water, a chemical reaction can occur to produce carbon dioxide gas. Carbon dioxide gas is dissolved in water containing sugar, fruit juice, and other ingredients to make soda.

Tools & Materials.

You can drink it, add citric acid to baking soda, add sugar and seal it in a cola bottle for 10 minutes, it is an ordinary soda.

Watermelon is eaten raw to cool off, and it is also made into a delicious cold watermelon, and two production methods are introduced.

1.Watermelon cheese Ingredients: watermelon, sugar, water, agar (powder) Method:

Wash the watermelon, remove the seeds from the gourd, and cut into small cubes. Soak the agar in water, wash it, pour it into the pot and add an appropriate amount of water, boil over low heat, and then, add diced watermelon and sugar, pour it into a container after boiling, put it in the refrigerator after cooling, and cut it into pieces with a knife when eating.

2.Watermelon jelly Ingredients: watermelon, sugar, agar, appropriate amount of various fruits Production method:

Take the juice of the watermelon and use a little melon pulp. Soak the agar in water and wash it off. Add the collected agar, melon juice and melon pulp, add sugar, mix evenly, put it on low heat and heat it slowly until the agar dissolves, and then add other favorite fruits, such as fresh peaches, pineapples, grapes, apples, pears, etc., pour them into a container or melon shell after cooling, put them in the refrigerator, and eat them after they are condensed.

Here are a few ways to make your own soda:

1.Simple and easy method: clean a bottle of mineral water or bottle, add an appropriate amount of sugar, then pour the mixture of sugar and boiling water into the bottle and shake gently to allow the sugar to dissolve well.

Then close the bottle tightly, put it in the refrigerator and wait for 2-3 hours to enjoy the homemade soda.

2.More detailed method:

The quantity of the material:

1 bottle of mineral water or soft drink.

1 handful of sugar. 1 4 cups water.

Steps:1In a clean container pour 1 bottle of mineral water or soft drink.

2.Gently place 1 handful of sugar in a container and gently press the sugar with a blender or spoon to dissolve it thoroughly.

3.Pour 1 4 cups of water, simulating stirring, to help the sugar dissolve well.

4.Close the lid tightly and place the whole bottle in the refrigerator and wait 2-3 hours.

5.Once you have taken out the bottle, slowly open the lid and pour the remaining drink from the refrigerator into the bottle, then close the cap tightly and shake it gently.

6.Wait 1-2 minutes and enjoy your homemade soda.

Note:* If you want a more frothy soda, you can add 1 4 cups of yogurt or protein powder in step 2 and gently press the sugar with a blender or spoon pants mold base to dissolve it thoroughly.

The time spent in the refrigerator can be adjusted according to your taste, and the longer it is, the better the texture. However, do not exceed 2 hours, otherwise it will affect the taste.

Ingredients: 500 grams of cold boiled water, 100 grams of Pinghongji mountain juice, 25 grams of white sugar, 3 grams of citric acid and baking soda, a little apple flavor and food coloring.

Method: Pour the white sugar into cold boiled water and stir thoroughly to dissolve it completely. Then add apple juice, citric acid, apple flavor and food coloring to the sugar water, and stir thoroughly.

Finally, while stirring, slowly add the dilute solution of baking soda, seal it immediately, and put it in the refrigerator to cool down.

Soda has become an indispensable drink in people's daily life, so how to make homemade soda? If you are interested, come and take a look!

1. Buy the ingredients needed to make your own soda.

2. Bring the water and sugar to a boil and put about liters of water and eight cups of sugar into a large soup pot. Bring the mixture to a boil and stir until the sugar dissolves in the water.

3. Pour the sugar water into the bucket.

4. Add sodium carbonate extract and yeast and mix them well until completely dissolved in water.

5. Pour the mixture into the bottle.

6. Store the bottle at 21 degrees Celsius (70 degrees Fahrenheit). At this temperature, the yeast will ingest the sugar and begin fermentation, making carbon dioxide. It takes two or three days for water to carbonate.

7. Test the carbonation results, squeeze the plastic bottle, if the bottle feels very strong when squeezing, then, the water has been carbonated, if the bottle is easily retracted, it will take more time for them to fully carbonate.

8. Refrigerate the bottle, when the water in the bottle becomes carbonated drink, you can put the bottle in the refrigerator to cool. Once the soda is cold, open the bottle and enjoy the homemade soda.

That's all there is to know about how to make your own soda.