The computer was shut down halfway to a sudden power failure, and when the power came, the computer

1) Press F8 to do not move to the advanced option when it appears in the release of the power, select "The latest correct configuration" Enter to repair, and press F8 to enter the safe mode to restore the system or reinstall the system.

If such a problem arises due to software conflicts, inappropriate drivers, or system problems, you can restore the system in safe mode, or you can't reinstall the operating system, don't install software, patches, drivers, etc., and see if there are still problems with booting? If you don't install drivers, patches, and software step by step, and find something that isn't suitable, don't install it.

2) If you can go into the system to repair the disk.

The disk repair method that comes with the system: (repair each disk).

The specific steps are as follows: select the drive letter in My Computer, right-click, select "Tools Start Checking" in the pop-up drive properties window, and select "Automatically Repair File System Errors" and "Scan and Recover Bad Sectors", and then click Start, the scanning time will vary depending on the disk capacity and scanning options (after doing the above method, a box will pop up, the point is, automatically shut down and repair at boot).

If the fault persists, please restore the system or reinstall it (it is still not possible to format the hard disk and repartition and reinstall it).

The blue screen is not accurate,Sometimes just looking at the blue screen can't solve the problem,It is recommended to try to change the system disk or see if there is any obvious yellowing on the interface,What is the obvious damage to the capacitor,If you have to look through the blue screen,The following is a detailed explanation。

0x000000ed:unmountable_boot_volume

Error analysis: It is generally caused by an error in the disk, sometimes it is also recommended to check whether the hard disk connection is not in good contact, or does not use a cable that meets the transmission specifications of the hard disk, for example, the ATA-100 still uses the ATA-33 cable, which does not matter to the low-speed hard disk, but tells the hard disk (supports ATA-66 or above) The requirements are stricter, and the connection with the wrong specification will sometimes cause this kind of failure to boot. If this error still occurs frequently after repair, it is likely to be a precursor to hard drive corruption.

Solution: In general, a reboot will resolve the issue, and it is recommended to do so anyway"chkdsk /r"command to check the repaired hard drive.

Power outage causes system file corruption, redo the system

Let's redo the system, it may be that the system files are missing.

Solutions and steps for computer blue screens:

1.Restart your computer. If the blue screen only appears occasionally, just restart the computer;

2.During the shutdown process, the intermittent blue screen phenomenon can be solved by the first patch, turn on 360 Security Guard, select Vulnerability Fix, and check "Automatically Fix Blue Screen".

3.Infection with the virus. The destruction of malicious programs leads to frequent blue screens on the computer; You only need to turn on 360 Security Guard frequently to check your computer for viruses.

4.Problems with the hard disk can also often lead to a blue screen on the computer, such as bad sectors on the hard disk, and the blue screen phenomenon caused by the computer's error in reading data.

5.The internal hardware temperature of the computer is too high, the CPU temperature is too high in summer, and we open the case after the blue screen of the computer, if we feel that the internal temperature is very high, it is likely to be caused by too high temperature.

6.The memory module is faulty. Most of the memory modules are oxidized, and there is the incompatibility of the memory, which can be solved by reinstalling the system.

7.Power issues. Due to the instability of the inferior power supply voltage, the computer will find the error when the power is shut down, so it causes a blue screen.

8.Too little disk space or too many junk files can also seriously affect the operation of your computer, so you need to clean up the junk regularly.

9.Dust issues. Regularly cleaning up the garbage in the chassis can effectively prevent crashes and blue screens.

10.Software conflicts cause a blue screen of shutdown. Make sure to close all running programs before shutting down, if the blue screen of shutdown occurs repeatedly, please check the compatibility of the recently installed software, or reinstall the system, restore the system, or delete the recently installed software.

11.Drive. If you have just installed a new driver for a piece of hardware, or if you have installed a piece of software, and it has added the corresponding item to the system service (for example:

Data Expansion: <>

The blue screen of a computer is a screen image with white letters on a blue background displayed by the Microsoft Windows operating system when it is unable to recover from a system error.

There are two white-on-blue images in Windows that are both known as the Blue Screen of Death: one is a minor glitch in the Windows 9X operating system, and the other is a kernel error in Windows NT. Since Windows 9X has retired from the stage of history, it is now generally referred to as the latter.

A computer that suddenly loses power is running, so you are running it and shuts down unexpectedly, which may cause some of the processes you are working on to be illegally aborted. If you change to the previous 98 system, rebooting will prompt illegality. Fortunately, the current XP system is more perfect, and it can automatically check the hard disk error after booting, and the system process is illegally closed error, and can be automatically repaired.

So what you see after booting up is a blue one that shows the percentage progress number of the repair process.

This is not called a blue screen, such a phenomenon is normal, so be patient and wait for it to go through 100% automatically, that is, it will be repaired automatically, so that after entering the system again, there will be no problems in your system. The real BSOD glitch doesn't refer to this.

BSOD failure refers to the freeze frame of the screen background caused by some software failure, virus damage, hardware failure, or compatibility problem during the operation of the computer, and the color is dark blue, with a lot of English written on it. At this point, you press any key on the keyboard and there is no response -- and there may be an alarm on the user's motherboard - (depending on the support of the motherboard). When encountering such a situation, it is called a real blue screen.

Downstairs, by the way, I should pay special attention to the computer not to be struck by lightning on rainy and thundery days, it is easy to burn out the hardware, so choose the power supply of the computer, be sure to choose a good power supply, with lightning protection. You should try to avoid thunderstorms to try the computer, because the millions of volts generated by thunder and lightning will also pass through the broadband line and penetrate the motherboard hardware. However, it seems that the current good motherboard and power supply are protected against lightning strikes.

It's okay with this, it's fine to be normal after turning on the machine a few more times.

You can rest assured of this.

I've tried all of them.

You give me another way.

Have you restarted?

It seems like a tricky question.

It doesn't matter much to be able to boot up through the self-test graphics card motherboard, and the rest is the hard disk, or use the gold finger of the memory and graphics card to eraser! Plug the connected cable back in!

Is it a blue once or a permanent blue screen?

Blue can be ignored once.

Permanent blue screen - it's hard to tell.

One time there was thunder and then my computer wouldn't turn on, and it was also a blue screen or a black screen.

I redo the system.

The hard disk boot area is gone, use PE boot disk boot disk boot or other boot after booting with diskgen to repair the boot area, you can ask me 406375678 specific method.