After the sign 4008 tires are repaired, the instrument still shows that the air pressure is not good

Hello, this generally needs to be reset or initialized, and it is possible to directly adjust the tire pressure interface with the setting key of the dashboard.

Hello, this is relatively normal, after repairing the tire, you can drive for a period of time, and you can recover on your own.

In your case, the tire pressure sensor is faulty. It is recommended that you go to a local professional repair shop to check the situation.

If the tire pressure is normal, it may be a problem with the sensor, and the other is to try to reset the tire pressure.

If the tire pressure is normal, it is recommended to go to the repair shop to reset the computer, if it doesn't work, it may be a sensor problem.

If the car with the sign 4008 still shows that the tire pressure is insufficient after the tire is repaired, the tire pressure needs to be reset.

Obviously, it doesn't matter what kind of car you are, but there is a problem with your car's central control tire pressure monitoring, and it is recommended that you check the sensors!

Hello, after this car replenishes the tire pressure, you have to go to the special computer of the maintenance plant to reset it. Free reset.

Hello, the tire pressure monitoring system needs to be reset after the tire pressure is filled.

This may be required, restart your car a bit, and then turn it on again, and there should be no such problem.

Hello, after confirming that there is no problem with the tire pressure, after driving for a while, the tire pressure meter will automatically reset.

After the vehicle repairs the tires, the air pressure of the tires is replenished, and after that, it still needs to be matched with your tire pressure sensor.

Hello, in this case, it is recommended to inflate the tires to the right air pressure and drive out for a few laps.

Hello, this is going to be matched, you see if there is a matching button, if you don't use a computer to match it.

Obviously, this has nothing to do with what model you are, but there is a problem with the central control of your car, it is recommended that you check it!

Hello, whether this vehicle has tire pressure detection, this air pressure can be adjusted to the appropriate area, and you can run it directly.

Hello, this can be done by the tire repair shop with a computer to re-approve it, or you can go to the repair shop to deal with it.

1. First click the one-button start button of the vehicle to start the vehicle engine, otherwise the tire pressure light cannot be eliminated.

2. After that, click the list button on the right side of the multi-function steering wheel.

3. After that, press and hold the icon button on the left side of the multi-function steering wheel, and you can stop when you hear the beeping sound.

4. After observing the dashboard of the vehicle, you can see that the tire pressure light has been eliminated.

1、Press the marked brake pedal. 2. Press the one-button start button.

3. The dashboard lights up.

4. Inflate the four tires of the vehicle to the standard air pressure.

5. Press the LIST button on the right side of the multi-function steering wheel to open the selection menu of the multi-function display.

6. Click the tire pressure monitoring initialization option on the multi-function display to confirm. The last step is complete.

The first part is to press this button of my finger first, and then the tire pressure initialization is OK.

If the tire pressure light is on, it means that there is a problem with the tire pressure, it is recommended to replenish the tire pressure first, and the tire pressure light will automatically disappear.

You should have a problem with the tire pressure of the vehicle, and if you add the normal tire pressure in time, the fault light will be automatically eliminated!

If the sun lamp of this motor vehicle wants to last for a long time, the air pressure of the tire must first be replenished, and then the parameters of the driving computer can be refreshed.

First of all, it is recommended that you check the tire pressure, if there is no problem, then you need to go to the 4S store and let the computer re-flash.

If the light is on to indicate that there is a problem with the sun, the first thing that comes to mind should be how to solve the tire pressure problem, not eliminate the light on.

Tire pressure reset on the center console display, set the button on the screen under the car logo.

Hello, this tire pressure light alarm is because there is a problem with the tire pressure of your car. It is recommended that you check the tires to see if there is any problem with the air pressure.

Press firmly on your car's brake pedal. The specific method is shown in the following figure:

2. Press the car's one-button start button. The specific method is shown in the following figure:

3. The power supply of the whole vehicle is turned on. The specific method is shown in the following figure:

4. Inflate the tires to standard air pressure.

The specific method is shown in the following figure:

5. Press the elimination button of the vehicle's tire pressure warning light for 3 seconds. The specific method is shown in the following figure:

It can be eliminated within the instrument panel.

Go to your local 4S store and check it out.

You can test it out and see how it goes.

It's either too high or too low.

I think even luxury cars will inevitably have various situations.

Go to the master first to check if it is the best problem.

The reasons for the abnormal tire pressure of Peugeot 4008: 1. Seasonal reasons, the tire pressure of the car will expand if the temperature is too high in summer, and the temperature will be low in winter; 2. Due to the tire pressure shrinkage tire itself, the tire seal mainly depends on its own air pressure, and the air pressure will leak a small amount after a long time.

The initialization of the Peugeot 4008 TPM can be done in the "Vehicle Functions" menu on the multifunction display. Press the "Vehicle Function" button; Select "Tire Pressure Monitoring Initialization"; Select "Confirm"; The system starts the tire pressure monitoring initialization and gives an information prompt.

A solid tire pressure monitor indicates that one or more tires are underpressed. Check all tire pressures as soon as possible. Check when the tires are cold.

After flashing, it is always on, indicating that the tire pressure monitoring system is faulty. In this case, the tire pressure monitoring system no longer functions, please go to Dongfeng Peugeot to grant the right to sell the service for inspection.

When the tire pressure is low, the alarm light is illuminated and accompanied by an audible signal, along with an information on the touch screen or instrument cluster. At this time, you should: reduce the speed of the car, do not brake sharply and hit the direction sharply; On the premise of ensuring safety, stop as soon as possible.

Tire pressure monitoring: The system automatically monitors the tire pressure while driving. While the vehicle is moving, the system continuously monitors the air pressure of the four tires.

The monitoring method is to compare the information of the tire pressure calibration value and the wheel speed sensor, and if a tire pressure is too low, an alarm will be issued. After adjusting the tire pressure or replacing the tire, a tire pressure calibration must be performed to reinitialize the system. The correct tire inflation pressure information is on the tire pressure label.

Photo by Q&A) @2019

1.With the engine turned off, press and hold the short distance counter reset button below the tachometer. Turn on the ignition and release the reset button of the short distance counter, and the service logo will appear on the display.

Pull out the minute button on the clock, turn the minute button to the right, and the mileage display will appear on the display. Turn off the engine and reset the warning message. Turn on the ignition and the service sign disappears.

2.When the tire pressure is insufficient, the alarm light is on, accompanied by an audible signal, and there is an information prompt on the touch screen or instrument cluster. This time it should be:

Slow down and don't brake sharply; Park as early as possible to ensure safety. Tire pressure monitoring: The system automatically monitors tire pressure while driving.

When the vehicle is moving, the system continuously monitors the air pressure of the four tires. The monitoring method compares the calibration value of the tire pressure with the information from the wheel speed sensor, and an alarm is issued when the tire pressure is detected as low as it is detected. After adjusting the tire pressure or replacing the tire, the tire pressure must be calibrated to reinitialize the system.

The correct tire inflation pressure information is on the tire pressure label.

1. DazhiPress firmly on your car's brake pedal. The specific method is shown in the figure below

2. Press the one-button start button of the eggplant imitation sock car. The specific method is shown in the following figure:

3. The power supply of the whole vehicle is turned on. The specific method is shown in the following figure:

4. Inflate the tires to standard air pressure.

The specific method is shown in the following figure:

5. Press the elimination button of the vehicle's tire pressure warning light for 3 seconds. The specific method is shown in the following figure:

1. First of all, press the vehicle information button after starting the 2017 Dongfeng Peugeot 4008 vehicle.

2. Then select the tire option in the 2017 Dongfeng Peugeot 4008 vehicle setting options.

3. Click on the "set" option in the tire setting options of the 2017 Dongfeng Peugeot 4008 vehicle.

4. Then click OK on the display interface of the 2017 Dongfeng Peugeot 4008 vehicle.

5. Finally, in 2017, after the "tire pressure monitoring initialization" of Dongfeng Peugeot 4008 vehicles is completed, the tire pressure light can be reset.

Tire pressure reset is generally to let the car run for a while, and then stop and hold the tire pressure monitoring button for 5 to 8 seconds without letting go, and then there will be a drop and it will automatically reset.

Hello, this only needs to flush the tire pressure of the vehicle to the normal value, and then run for a while to eliminate it.

It is necessary to reset it with a special computer for auto repair.

Hello, if the tire pressure and lights of this car are on, it is recommended that you check whether it is caused by too little else?

It's OK to initialize, it's tough. In the future, the tire repair will be used, first press the vehicle function key, and there is a tire pressure initialization inside, and the initialization is OK.

Makeup is made into a tree high, and ten thousand hanging green threads.