-
Peak power doesn't make much sense, it only lasts for a short time. Antik has always been a real watt standard, the rated power is as much as the mark, and there will be no useless peak power on the nameplate.
The measured power consumption of GTX560Ti is about 200W, and the two pieces are 400W. The 12V output power of the Model 620 has 576W, and the 400W of the graphics card is removed, and the power allocated to the CPU is about 170W. This is just the right thing to drive an overclocked quad-core CPU, such as the i7 2600k pressurized overclocked to 5GHz and consume about 150W.
So it's just super CPU, if the two graphics cards are not super, the model 620 is still enough. Besides, the performance of the two 560SLIs is good enough, and there is no need to overclock it anymore.
Of course, the above is just the case of rated power, and the model 620 will definitely have a peak power design, so even if the power consumption exceeds some, there is not much problem.
-
How can I say it? 560ti crossfire power consumption is very large, 560ti public version is about 190w overclocked version of more than 200w to 12v current is a 16-20a two 32-40a is close to 400w or more than 400w plus other hardware at least 12v output can reach 45a-50a power supply that is at least 700w or above, of course, this is only a theoretical value power supply can exceed the rated power Maybe 550w-600w can also work stably The key depends on what grade of power supply you buy The power supply is not only based on the nominal power, but also the heat dissipation is a problem, it is best to be able to use the 750W power supply, and the 12V output is a big problem.
It is recommended that the power supply of Antek or Corsair above 600w ··· If you overclock... 750w or more.
-
If I had to choose, I would definitely choose Antek!
First of all, Antek is an international first-line brand, and its quality is definitely better than that of the domestic first-line brand Huntkey; Second, Antek Mozun 620 is 80PLUS certification and 3C certification, while Huntkey multi-core F1 only has 3C certification, and Antek is better; Finally, the Antek Model 620 is a module design power supply, and the wiring is simple, but the Huntkey multi-core F1 is much more rigid!
I don't know the price, but Antek Model 620 Jingdong is only 539 yuan, hurry up and get it.
-
Sex is not worth ......We recommend Delta's NX550 or NX650, Zhenhua Iceberg Flagship 600
Antik HCG 620
...... betterJingdong has 699 yuan of iceberg Kingdee 600w, and better Haiyun x560 Zhenhua platinum ice butterfly.
-
This power supply comes from Haiyun foundry, using the classic active PFC double-tube forward + single magnetic amplification. Regardless of efficiency, the stability is remarkable. In terms of materials, it is better than the mainstream products on the market.
The rated power is 620W, and the output capacity of +12V is 48A, and the single output can better meet the needs of high-end platforms.
It adopts a semi-modular design,The playability is also good,The only drawback is that the native wire is less 550 yuan 580 yuan is a rare value-added product at the same price。
-
The life of use is very good, I am using it, hehe.
-
Not bad, I hope you are buying a good product.
-
It is recommended that the model has a large degree of freedom in arranging the wire. The power of both power supplies is enough, of course, the module power supply is selected. In addition, ANTEC is no worse than Kangshu's IP series. The IP series is not the high-end of Kangshu.
-
There is no difference except for the number of rated W. 450W 12V output strong point.
The power ratings of the two power supplies are different. 450w is dozens more expensive, and the cost performance is about the same.
If you want to be cost-effective, choose the non-module BP430plus, which is very good.
-
It is indeed very cost-effective, BP430 is very high.
Don't think about cost performance. This thing comes according to your machine requirements, but the difference is 50w** and 50. Buy 450w directly.
-
In general, the back cable is fine.