N72 Charging Issues, N7102 Charging Issues

Oh, the landlord N72 belongs to a smartphone, and the battery capacity is about 970 mAh, right? Just bought back, you need to charge it 3 times to activate the battery! The so-called 12 hours and 14 hours (only two hours apart, nothing serious) are just different activation times for the phone's battery!

The nokia mobile phone battery is very good, so the waiter lets you charge it for 14 hours, and it is recommended that the landlord charge it twice for 12 hours after the first charge for 14 hours. (Don't charge your phone for 14 hours...)Hehe, I hope it helps the landlord.

The previous electric board was nickel-cadmium electricity, which needed to be activated, and it was charged for 12 hours for 3 consecutive times, and now the electric board is basically a lithium battery, but the salespeople of many businesses still follow the previous idea and will warn customers to charge for 12 hours, but in fact, there is no need for this. Once the phone prompts it is full, you can unplug the charger.

First of all, the first floor is talking nonsense. The salesperson said to the customer that the first charge would take more than ten hours. This is a serious mistake.

The activation on the first floor is for non-lithium batteries, and there is no activation for lithium batteries. If you believe what I say, just do what I say: just charge it normally.

If the battery shows that it is fully charged, do not charge it again. Regular lithium battery charging is to cut off the power when it is fully charged. Internationally, it is stipulated that the lithium battery of mobile phones cannot be charged for more than 8 hours.

There are too many principles, I don't want to say more here, if you believe me, then the charging should not exceed 8 hours.

The phone shows that it is best to charge for two hours after the charging is completed.

Hello: According to your description, it is recommended that you try the following:

1.Shutdown charging test.

2.Replace the charging position to eliminate slow charging caused by intermittent socket contact 3If conditions permit, replace the spare charger for testing.

Or send it for repair and testing4When the phone is turned on and charged, if the mobile phone is equipped with a third-party plug-in such as a charging doctor, it is recommended to test it after uninstalling it.

5.Check whether there are foreign objects in the charging interface of the mobile phone, such as liquid ingress, debris that causes the charging port of the mobile phone to be in poor contact with the charger and causes slow charging, if this situation is recommended to be repaired as soon as possible.

6.Back up your phone data (Book, SMS, etc.) and factory reset your phone (Settings - Reset - Factory Reset.

Welcome to Samsung's Digital Services platform.

Hello: According to your description, it is recommended that you:

1.Turn off the battery, remove the battery, and use a cotton swab to wipe the battery and phone contact points.

2.Use the original charger to connect to the home power source for charging.

3.Replace the power outlet, try or replace a data cable to connect the charger to the rental mill for charging.

4.If you can't charge it with a wire charger, if conditions permit, you should try to replace the battery or use a universal charger. If other charging equipment can charge the battery, it is possible that your cable charger is not in good contact and it is recommended to replace it.

5.If the phone can be turned on normally, it is recommended to back up the data in the phone (such as contacts, multiple files, etc.) and restore the phone to factory settings.

It may be that the charger is not original, my last Lenovo mobile phone is, it is recommended to buy the original charger, or spare battery.

Hello: According to your description, it is recommended that you try the following methods:

1. Take out the battery, gently wipe the battery and contact with the mobile phone.

2. Use the original battery and original power charger to connect to the power supply to charge.

3. Try to replace the data cable balance grip.

4. Try to replace other batteries.

Brother cid=cn ppc support service repairnet 120522