Is it better to build a house and drive piles or ground beams?

It is better to build a house with the traditional piling method, which is stronger, stronger and earthquake-resistant.

Building a house, of course, is to lay the ground beams, a little very much, must be a good practice! The ground beam is commonly known as the ground circle beam, which will be closed when circled, and the structural column will form a seismic cracking system to slow down the uneven settlement, which has the effect of load-bearing, foundation and building connection into one, and preventing cracks in the wall and floor when the foundation sinks; Usually can not see their role, but once there is a **, these components will improve the seismic level of the house, usually talk about the seismic octave fortification, that is, the house is equipped with these seismic components, now are using an integrated design. At the same time, we need to know that as a basic function, it should be a geosphere beam, located above the wall and below the floor slab as a ring beam, and the vertically constructed reinforced concrete column as a structural column.

If the economic conditions are sufficient, making the upper ground ring beam is equivalent to icing on the cake.

On the contrary, if the foundation conditions are poor, the building is still a ground circle beam, and for the depth requirements of the ground beam, the general rural area is to build a small western-style building with 2-3 floors, and under such conditions, the depth that needs to be dug is about meters; Of course, the soil quality is different in various places, the beams are not the same, and the depth is not the same, this specific situation should be negotiated in advance according to the main person in charge of the construction team, and it is recommended to find a professional architectural designer before building a house, design the drawings, and mark the key points and material models, which saves time and money! Seeing this, there are many friends who think that if the geological conditions are good, there is no need to make ground beams, as long as the foundation is done, which is obviously wrong.

Hit the floor beam well! Compared with the two, the ground beam is stronger and more stable. Therefore, it is better to lay the floor beam.

Good morning and health. Send you a beautiful picture and wish you a happy life! Happiness and well-being!

It is better to lay floor beams, because the foundation is very solid and covers the entire range of the foundation, and the house will not be tilted or partially subsided after it is built. Relatively speaking, the safety factor of using floor tiles is not as high as that of floor beams, because it only has a few support points.

The ground beams are deep into the ground, while the piles are high above the ground, and it is clear that the ground beams are more stable!

The reality is also like this, unless the terrain cannot meet the construction requirements, the pile will be driven, otherwise it is basically the ground beam!

It is better to build a house or drive piles. Because the reinforced concrete piles are driven into the ground, it can play an excellent role in the stability of the house in the future. At the same time, the reinforced cement can also prevent corrosion. It plays the role of draining and stabilizing the house underground. FYI.

I think it is better to lay the ground beams, because the foundation is the foundation of the house, and when the foundation is strong and stable, the house will have no problems, because the ground beam structure is stronger and stronger than piling, and the structural performance is better. Houses are safer and more reliable to build. So I think it's better to hit the floor beams.

In terms of bearing capacity, of course, piling is good. Compared with the ground beam, the pile goes deeper into the bearing layer and can better transmit the upper load. The pile body can pass through the weak soil layer and support the stable solid soil layer or embedded in the rock foundation, in the first unfavorable situation, the pile body still has enough compressive and uplift bearing capacity by relying on the deep stable soil layer, so as to ensure the stability and safety of the building.

Piles are more suitable for projects with medium and high floors and weak foundations.

The buried depth of the ground beam is shallow, and the main role is to coordinate the deformation of each foundation when it is the first time, so that the foundation can work together. Ground beams are more suitable for low-rise and geology projects.

From the perspective of project cost, the cost of piling is correspondingly much higher than that of ground beams. This needs to be selected based on comprehensive consideration.

As for the choice of piling or ground beam, we need to consider the following aspects:

First of all, if it is a large-scale project such as a commercial building or a residential building, there are design and construction drawings, and we can construct according to the design and construction drawings. After all, survey and design are authoritative, and their plans are scientifically calculated.

Secondly, if you are building your own house, you must ask an experienced engineer to judge the condition of the foundation, such as: soil type, whether the foundation can withstand the upper load, etc. If the soil condition is poor, piling is the best option.

If the soil condition is better, the ground beam is a better choice, and most of the low-rise houses in rural areas choose this.

It is better to lay the floor beam, the ground beam is strong and durable.

It's definitely better to hit the floor beams, because it's really stronger. Because you've laid the ground. A section is the equivalent of your house. underground. Bearing. More. Much more. A large paragraph. That's why it's stronger.

When building a house, many people think that laying floor beams should be a good way to do this, which is a wrong choice because it is very unsafe when laying floor beams, and the foundation of the house is not very solid. In this case, after the installation of your house, then there will be a lot of problems, such as some cracks in the walls and even some cracks in the roof. This will have that impact on your life, so when we choose to build a house, we should take piling as the main method, although this method is more troublesome, but it will make your house foundation more stable, so that it will be safer to live.

Therefore, we have to choose piling to build a house, which is a great guarantee for us to build a house to safety, so we must remember that the house is not to live for a year, nor to live for two years, but to live for a long time, so the piling method is the most stable.

It's better to build a house or build a floor beam. The foundation is solid. Build a house ***.

Don't worry about sinking. Don't worry about cracks in your house. The foundation of the house is the most important, so the ground beams must be laid.

It's better to build a house or build a floor beam. The foundation is solid. Build a house ***.

Don't worry about sinking. Don't worry about cracks in your house. The foundation of the house is the most important, so the ground beams must be laid.

It's better to build a house or build a floor beam. The foundation is solid. Build a house ***.

Don't worry about sinking. Don't worry about cracks in your house. The foundation of the house is the most important, so the ground beams must be laid.

To build a house, it is good to lay the ground beams.

When building a house at home, they all drive ground beams, because this is lower than the cost of piling, and it is strong enough. However, if it is a commercial building and a high-rise building, it should be safer and firmer to drive piles.

It is better to build a house and drive beams than to drive piles. Because piling is carried out on flat ground, the concrete ground pile is driven into the bearing layer with a pile driver, and the ground beam is excavated on the flat ground and then starts to make the ground beam with steel bars, so building a house and driving the ground beam is stronger than piling, so building a house and driving the ground beam is better than piling.

I think building a house must be more solid with floor beams, like the previous you built a house are itchy, and the previous house can live for many years, so the consumption of floor beams is not higher than or high, cheaper than fighting, and the quality may be better, some stronger things, more reassuring people. I think building a house must be more solid with floor beams, like the previous you built a house are itchy, and the previous house can live for many years, so the consumption of floor beams is not higher than or high, cheaper than fighting, and the quality may be better, some stronger things, more reassuring people. I think building a house must be more solid with floor beams, like the previous you built a house are itchy, and the previous house can live for many years, so the consumption of floor beams is not higher than or high, cheaper than fighting, and the quality may be better, some stronger things, more reassuring people.

Building a house should be compared to piling. Piling can support load-bearing, load-bearing has load-bearing capacity and ground beam, load-bearing capacity is relatively poor. Building a house and driving piles just doesn't look so good on the outside. But his weight-bearing capacity is very strong.

Personally, I think it is good to lay the floor beams, so that it can become a frame structure with the house and become one with the house. Make the house stronger and more resistant to vibrations!

Personally, I think it should be good to drive piles. First, the ground beam is relatively submerged, although it is enough to build a house in the countryside, but once it encounters a major natural disaster, it cannot be resisted, and second, the piling is deeper, and it is also more solid, and many buildings will choose to drive piles, which is safer.

From an environmental point of view, especially the soil quality, piling is usually better than tamping. Pile foundations are necessary for some buildings and bridges and are not often used in houses. However, people are building houses higher and higher, and in some places the soil quality is not good, so it is necessary to drive piles when building their own houses.

Self-built houses are usually strip foundations, but there are still a few people who use piles.

The so-called piling is to drive the foundation of the pile deeper in the east-west direction under the foundation. There are two kinds of prefabricated piles and cast-in-place piles, but countless people use prefabricated piles, that is, the prefabricated piles are squeezed into the ground by a pile driver. It's a couple of contrasting piles.

The impact of these piles cannot be estimated. Even in the event of a natural disaster, the settlement of the foundation is minimal and will not affect the house, as the piles will not be pulled out. In some places, our old foundations may have good soil quality and may also expand our footing.

However, for a new foundation backfilled with several deep pits, piling is a necessary process if several more layers are to be built on it.

What is the importance of tamping? After the pile below us is finished, there will be a layer of Suoda soil in the foundation pit, which is a mixture of lime and soil. These are soft.

The purpose of tamping is to firmly press these soil layers. Because the wall above us can't be built on a layer of loose soil, there will be hidden dangers. After compaction, the soil layer will no longer have voids, and it will not settle due to the extrusion of the voids.

However, there is one thing worth noting about this impact. That is, it is useless to tamp in front of a little deep soil.

For example, there is a meter or two of loose soil in the foundation. I want to press it tight. This can't be done. It can be broken and looks sturdy, but it's still soft on the inside. This tamping can be up to 50 centimeters deep or even only 20 centimeters.

I think it's good to build a house or a floor beam, because if you build a house, the foundation is the most important, if you don't lay a good foundation, no matter how good the top is built, the house will also have a problem, if the house has a problem, it is equivalent to a white cover, and the money is spent in vain, so the most important thing is to lay a good bottom beam to prevent problems on the ground, which is the most important, and piling can be played of course should also be played, piling also plays a good role, but he still thinks that the bottom beam is more important than the ground beam.

It is better to build a house and drive a floor beam than to drive a pile, because the floor beam is strong and sturdy, and now there are more ground beams to build a house, and piling belongs to a relatively old way of building a house, and now it has been gradually eliminated and is not so popular.

The foundation of a self-built house is generally made by someone by yourself, so is it better to drive piles or make ground beams? In fact, we must first understand the soil condition, and how many floors to build, and if the soil condition is not good or the floor is high, we must drive piles. That is, the soil layer is good and the pile foundation is still the same, so that the safety factor can be guaranteed.

Today, I am here to share with you how to distinguish the soil layer in the countryside and what kind of foundation to choose.

What kind of foundation is used for rural house construction, the key depends on the local soil conditions: foundation soil can be divided into rock, gravel soil, sand, silt, cohesive soil and artificial fill according to the specification. Among them, sand, silt and artificial fill, these three must be made as a pile foundation, and the other several must also be discussed and deployed with experienced masters when building a house!

Nowadays, when building a house in the countryside, whether there is a pile foundation or no pile foundation, the ground beam will be 100% done. Some do 300mm, some make 500mm, etc., and many of them will use bricks to get big feet. Then make the ground beam on the brick foundation, and some do not use the brick foundation (strip foundation), but use the cushion cap as the foundation, which is more cost-saving than the brick foundation.

Compared with cushion caps and brick foundations, pile foundations can bear the best bearing capacity, but the cost is also the highest. In rural areas, it is generally not sand, silt, and backfill, and will not choose to use pile foundation, which is too costly. Generally, the mode of adding ground beams to the cushion cap foundation is used for construction.

Generally, the soil is relatively hard, and the floor is not high, and the bearing platform will not be chosen, but will only use the ground beam, increase the foundation, and increase the height of the ground beam, so that the entire ground beam carries the weight of the house, and then combined with the surrounding structural columns, so that the homeowner becomes a whole.

The soil layer and the height of the floor are the most primitive considerations before building a house, and different patterns have different solutions. Building a house in the countryside is a big expense, and the soil quality and floor directly determine the size of the basic expenditure.

It is better to build a house or to drive ground beams than to drive piles. In particular, many of today's houses are two-storey, and they need to have a solid foundation. Flooring beams make the foundation strong enough to withstand the weight of the house.