Yoyo washing bearings and lubricating oil is urgent

After washing the bearing, it will not damage the bearing without oiling, and it is not easy to get on Audi's lubricating oil A ball after washing, and it is not easy to use Audi's lubricating oil A to enhance idling.

Use Audi's lubricating oil a to make the yo-yo not easy to ** enhance idling, and if you have money, you can buy yyj's one-handed 1a fancy oil.

After washing the bearing, it will not damage the bearing without oiling, but it is not as good as oiling.

After washing, it is not easy to put on Audi's lubricating oil A ball**.

After washing the bearing, it will not damage the bearing without oiling, and the use of Audi's lubricating oil a makes the yoyo not easy to enhance idling, and enhances idling after oiling

Personal opinion to hope to help lz. In fact, yoyo doesn't need lubricating oil.,Except for the resistance oil needed to play 2A.。。 We wash the shaft to dissolve the oil that adheres to the bearing, and if we add lubricating oil, there is no point in washing the shaft.

First of all, LZ said that YYO is not easy **,That is the problem of bearings, I think LZYOYO's bearings must be the kind of flat bearings,You can go and buy a big bearing,For example, the coffee where the non-sister is.。。 DIY large bearings and the like, so that the spacing between the balls will become larger, it is not easy to **, and it is necessary to wash the shaft often (*

A is the special lubricating oil for the competition, which is the lubricating oil applied before the competition. Reduces friction and increases idling.

b is a general lubricating oil, but also a maintenance oil, usually at home lubricating oil. Increase the ** force, greatly weaken the idling.

C is a 2A fancy special lubricating oil, which can enhance the ability of yo-yo automatic**.

Increase the ** force, greatly weaken the idling. It is best to go on A, and it will not damage the bearing if it is not oiled after washing the bearing.

Hope I can help you.

I have also washed the shaft with fire engine oil, and the performance is really good.

There are many more experienced people who tell me that it is best not to oil the shaft after washing.

I've tried oiling, but the idle time seems to have decreased.

If you want to practice 2A, you should put on lubricating oil B, if not, it's better not to do it.

Summary. Hello, for your question [My yo-yo ball bearing can hardly turn after being lubricated, how to break, it is useless to wash. This question gives you the following answer:

Wash off with a washing shaft, preferably with zippo fire engine oil or kerosene. Do not wash it with water, it will rust. Put the bearings in a small container and pour in the zippo engine oil, just a little past the bearings.

Then close the bottle tightly, shake for 2-3 minutes, steep for 1 hour and let it dry. Wash the shaft once, the idling will not be significantly improved, it will slowly increase with the number of times, you had better change 10 beads of stainless steel KK to prevent rust. If you find it too much trouble, just keep playing until the oil slowly wears out.

My yoyo bearings can barely turn after being lubricated, no matter how they are broken, it is useless to wash them.

Hello, for your question [My yo-yo ball bearing can hardly turn after being lubricated, how to break, it is useless to wash. This question gives you the following answer: wash it off with a washing shaft, preferably with zippo fire engine oil or kerosene.

Do not wash it with water, it will rust. Put the bearings into a small destroyer and pour in the zippo engine oil, just a little past the bearings. Then close the bottle tightly, shake for 2-3 minutes, steep for 1 hour and let it dry.

Wash the shaft once, the idling will not be significantly improved, it will slowly improve with the number of times, you had better change 10 beads of stainless steel kk to prevent rust. If you find it too much trouble, just keep playing until the oil slowly wears out.

The following related extensions, I hope it will help you: it is best to tie the bearing with fire engine oil, first remove the dust cover from the forest transport, pour the fire engine oil that can cover the bearing in a small spring inspection bottle, close the lid, shake it desperately, put it aside and wait for 10 minutes, and then use tweezers to clip the bearing out, dry it with a paper towel, and then put it on the yo-yo, (it is recommended not to put lubricating oil), the timing time of the yo-yo stupid beam will be longer.

Still have questions? Kiss, can you talk about it specifically? Or is there anything you'd like to talk about? <>

Yoyo lubricant usage is as follows:

First, take the yoyo apart and remove the bearings. Then apply the lubricating oil evenly to the recessed part of the bearing, taking care not to do too much. Finally, it is OK to assemble the yo-yo back, if the yo-yo is used frequently, the last 10 16 days on the lubricating oil once, each time about one or two drops, too long without lubricating oil will lead to ** difficulty.

Introduction to yo-yos:

Yo-yo, according to legend, in the 16th century, the hunting people of the Philippines used tools for hunting and fighting, hanging a heavy object like Yoyo at the front end of the rope. In 1700 A.D., Yoyo spread from China to Nagasaki in Japan, west to India, and from India to Europe. In Japan, Yoyo is figuratively known as a "unicycle" or "money wheel" and is popular among young Asians.

At the beginning of the 18th century, Yoyo became popular in England as "Prince's Treasure" and in France as "Norman Yoyo", especially in the upper class of French and English works. Since then, the toy and the name "Yoyo" have spread from France to the rest of the world.

Yo-yo is not only a sport, but also the world's most fancy, difficult, and ornamental hand-held skill. Some people say that yo-yo is an educational toy, and yo-yo is not a simple educational toy. Yo-yo, a word that is not unfamiliar to everyone, is often understood as a childish toy for children, in fact, the yo-yo is known as "the second oldest toy in the world".

The oldest toy is a doll). After many years of continuous innovation and development, yo-yo is becoming a popular hand-to-hand sport all over the world. Because each player's style and self-created style are different, there are many types of yo-yo technical styles, which can be said to be a sea of technology.

There are currently thousands of styles in each of the five mainstream fancy groups, and there are still a lot of new fancy styles being researched every year.

It is contradictory to lubricate and wash the bearing, and washing the bearing is to wash off the excess oil inside the bearing.

If you play online tricks, you have to wash the bearings. Because in order to prevent rust, the bearings are coated with maintenance oil, which is sticky, which will hinder the rotation of the steel balls.

You can notice that the newly bought yo-yo is very quiet when sleeping, and this is because the oil film inside the bearing protects the steel ball.

But after playing for a long time, the bearing will be caught in dust and become less smooth. If you wash off the oil inside the bearing with a cleaning agent, the rotation of the ball will be extremely smooth, and you will hear the smooth sound of the yo-yo while sleeping. A yo-yo with washed bearings idling lasts a lot longer than a new one.

Volatile solvents, such as kerosene and lighter oil, should be used to wash bearings. Put the bearing into a vial containing the solvent, shake it gently and remove it with tweezers, and the oil will evaporate with the solvent after drying.

If you're playing the 2A slalom trick, you can use oil to maintain the bearings.

It can be used, the first floor is very detailed, engine oil is a kind of lubricating oil, the purity of the lubricating oil is higher, and the cost is more expensive.

No, apply type A lubricating oil and drop a few drops on both sides of the bearing.

Shields are on both sides of the bearing.

Look closely at the wire that has a circle.

Pick it off with a needle to remove the dust cover.

Wrap the bearing in cloth and shake it slowly with pliers.

It can be washed with a lighter or motorcycle gasoline, and motorcycle gasoline must be new. I've tried it and it works great!

Wash the bearing first (add a little oil to the sanitary ware in the clean water, such as white cat ==) and then wipe it clean and apply a little lubricating oil, and that's it.