The revision of the Coal Mine Safety Regulations, and how many paragraphs have been revised in the 2

How many paragraphs have been revised in the 2022 version of the "Coal Mine Safety Regulations".

Hello, the revised paragraph of the 2022 version of the "Coal Mine Safety Regulations" answers: 1. There are 721 articles in the coal mine safety regulations. 2. The "Decision of the Ministry of Emergency Management on Amending the Coal Mine Safety Regulations" has been deliberated and passed at the 27th ministerial meeting of the Ministry of Emergency Management on August 17, 2021, and is hereby promulgated to take effect on April 1, 2022.

3. Enterprises engaged in coal production and coal mine construction (hereinafter referred to as coal mining enterprises) must comply with the national laws, regulations, rules, procedures, standards and technical specifications related to production safety. I hope mine can help you and I wish you all the best!

(1) Equipment inspection. Increase the requirements for the inspection of important equipment and materials entering the mine and the safety performance inspection before entering the mine.

(2) Intelligence. Increase the requirements for the promotion of automated and intelligent mining.

(3) The number of mining faces produced by the mine at the same time. The following requirements have been added:

1) The number of coal mining faces in a mine at the same time shall not exceed 3, and the number of coal (semi-coal) roadway excavation faces shall not exceed 9. It is strictly forbidden to excavate instead of mining.

2) Within the scope of mining influence, two coal mining faces shall not be arranged for simultaneous mining.

3) It is strictly forbidden to arbitrarily mine the coal pillars left on the roof of the goaf and the overlying rock layer left by the non-collapse management roof, as well as the coal pillars for safety isolation in the goaf.

4) It is strictly forbidden to mine and destroy the safety pillars of high-speed railways.

(4) Top coal mining after the outburst of the outburst of the coal seam. The relevant content has been further adjusted and improved: "For coal seams prone to spontaneous combustion in high gas and protruding mines, comprehensive gas extraction measures should be taken mainly by pre-pumping to ensure that the gas content of the coal seam is not more than 6m3 t, and comprehensive fire prevention and extinguishing measures should be taken."

After the top coal is mined, it may be connected with surface water, old kiln water and strong aquifer. ”

(5) Dust removal device. The following requirements are added: in the case that the working stability of the internal and external spraying device is not guaranteed, the dust removal device that is linked and controlled with the roadheader, the anchor machine or the continuous shearer shall be used.

(6) Mining depth. The mining depth requirements of outburst mines of different well types are refined.

(7) Highlight prevention and control. Increase the relevant requirements for anti-outburst institutions, teams, safety management and quality control. The regional anti-outburst measures for coal seam gas in the pre-extraction and mining area of the bed-drilling or through-bed borehole, and the range and distance of the borehole control area are put forward.

(8) Prevention and control of rock burst. The overall requirements for the prevention and control of rock burst in mines are put forward. The requirements for the principle of anti-erosion, the identification of the impact tendency of the rock burst mine, the layout of the mine roadway and the mining operation, the monitoring of the rock burst, the withdrawal of personnel during the hazard relief measures, and the support are put forward.

(9) Fire prevention and extinguishing. The fire prevention at the wellhead has been improved. Increase the requirements for formulating special safety measures when the goaf is closed, and risk assessment and monitoring of natural fires in the goaf.

(10) Prevention and control of water hazards. It is required that the coal mining face threatened by the separation water should be analyzed and explored under the thick hard rock layers such as igneous rock, sandstone, limestone, etc., and the horizon of the development of the separation layer should be analyzed and explored, and measures should be taken to dredge and block the separation water in advance.

(11) Blasting safety. The regulations on the safety distance of blasting operations are further refined.

On March 14, the Ministry of Emergency Management held a press conference, and Wang Duanwu, director of the Department of Regulation and Science and Technology of the State Mine Safety Supervision Bureau, said in a reporter's question that the newly revised "Coal Mine Safety Regulations" have been implemented since April 1, which has increased the requirements for actively promoting automation and intelligent mining and reducing the number of underground workers.

It is reported that on January 6 this year, Order No. 8 of the Ministry of Emergency Management promulgated the "Decision of the Ministry of Emergency Management on Amending the Coal Mine Safety Regulations", and the newly revised "Coal Mine Safety Regulations" came into force on April 1. Wang Duanwu said that the revision includes a total of 18 articles, mainly for six aspects:

The first is to increase the inspection system for important equipment and materials to effectively solve the problem of Chongqing Songzao Coal Mine27" and other series of coal mine accidents exposed the important equipment of the coal mine is counterfeit and shoddy, shoddy, and does not meet the requirements of national or industry safety standards, so as to further ensure that the equipment and materials in the coal mine meet the relevant standards and the requirements of coal mine safety production.

The second is to increase the requirements for actively promoting automation and intelligent mining, reducing the number of underground workers, actively promoting the "mechanization substitution, automation and reduction" of coal mining enterprises, and insisting on using scientific and technological means to promote the high-quality development of coal mines.

The third is to strictly control the number of working faces produced at the same time in the mine, and put forward the requirements of "the number of coal mining faces in a mine at the same time shall not exceed 3, and the number of coal (semi-coal rock) roadway excavation faces shall not exceed 9, and it is strictly forbidden to excavate instead of mining" and "2 coal mining faces shall not be arranged for simultaneous mining within the scope of mining influence".

Fourth, we have strengthened the prevention and control of coal and gas outbursts, and increased the requirements for the setting and management of anti-outburst teams, the scope and distance of regional anti-outburst measures, and the control area and distance of boreholes, so as to maintain an orderly connection with the "Detailed Rules for the Prevention and Control of Coal and Gas Outbursts".

Fifth, the technical requirements for fire prevention and extinguishing have been strengthened, and the requirements for fire prevention and extinguishing at the wellhead, special safety measures for the closure of goafs, and risk assessment and monitoring of natural fires in goafs have been increased.

Sixth, to strengthen the prevention and control of rock burst, in order to implement the requirements of strengthening the dual prevention mechanism of safety risk classification control and hidden danger investigation and management, the newly revised "Coal Mine Safety Regulations" put forward requirements for the prevention and control principles of rock burst in coal mines, the assessment of rock burst disasters, the identification of impact tendency and risk assessment, the layout of mine roadways and mining operations, the monitoring of rock burst, the withdrawal of personnel during hazard relief measures, and the support.

In addition, the newly revised "Coal Mine Safety Regulations" have also been improved in coal mine dust removal and reduction devices, water hazard prevention and control, blasting operations, etc. Wang Duanwu said that in the next step, the State Mine Lubao Safety Supervision Bureau will urge all localities, relevant departments and coal mining enterprises to increase the publicity and implementation of the new "Coal Mine Safety Regulations", organize corresponding learning and training, carefully compare the new regulations and new requirements, carry out benchmarking and table inspections, improve relevant institutions, systems, equipment, make up for shortcomings, strengths and weaknesses, implement various management measures, strengthen emergency rescue and disposal, and promote the implementation of various regulations.

Hello dear, happy to answer for you, the answer is: Hello dear, the interpretation is as follows; Article 1 In order to implement the production safety policy of the Party and the State, adhere to safety first, ensure the safety and health of coal mine workers, protect the resources and property of the State from loss, ensure the normal progress of production and construction, and promote the development of the coal industry, the "Coal Mine Safety Regulations" are hereby formulated. Leading cadres at all levels in the coal industry must take the implementation of these regulations as their primary responsibility, and all employees must abide by the provisions of these regulations.

Article 2 The administrative authorities at all levels of the coal industry, the mining bureaus (the construction headquarters of the mining area, the infrastructure construction company, the geological company, the local coal mining company, the same as the following articles), the mine (the engineering team, the geological team, the same as the following articles) and other enterprises and institutions are the first responsible persons for production safety; Chief engineers at all levels (including chief engineers, chief engineers, and technical leaders, the same as the following) shall be technically responsible for safety work; Administrative and technical deputies at all levels are responsible for the safety work of the business in charge; The person in charge of each functional department is responsible for the safety work within the scope of his or her duties, and must do a good job in business security; District, team, and team leaders are directly responsible for the safety work within their jurisdiction. Workers are responsible for the safety of their positions. Article 3 The Ministry of Coal Industry, the Provincial (Regional) Coal Bureau (Coal Department, Coal Industry Company, the same as the following articles) and the Mining Bureau must establish a Safety Supervision Bureau.

The Safety Supervision Bureau of the Mining Bureau dispatches a safety supervision station to the mine. The director of the safety supervision bureau of the mining bureau shall be appointed and dismissed by the provincial (regional) coal bureau, and the director of the mine safety supervision office (station) shall be appointed and dismissed by the mining bureau. Safety supervision organizations at all levels exercise supervisory power on behalf of the implementation of safety guidelines, laws and regulations within the jurisdiction of their superiors.

Safety supervision institutions at all levels shall be equipped with safety inspectors in accordance with regulations. Safety inspectors must be not less than a graduate of a secondary technical school or have the same level of education and professional ability, have been engaged in the professional work for more than five years, adhere to principles, have a decent work style, can often go into the mine and obtain a supervision certificate. The Safety Inspector is responsible for supervising the implementation of these Regulations and exercising the supervisory power in accordance with the provisions of the Safety Supervision Regulations

the right to enter any workplace at any time for safety checks; the right to participate in the review of designs and measures; Tangible branch rights to supervise the extraction and use of safety technical measures; It has the right to stop illegal commands and illegal operations, and exercise fines or other handling opinions; For unsafe hidden dangers, they have the right to request that they be resolved within a time limit; For workplaces that threaten production safety and may cause accidents, they have the right to order them to stop working and withdraw personnel.

The new "20 measures" for epidemic prevention

Here's the point! On November 11, the Comprehensive Group of the Joint Prevention and Control Mechanism for Responding to the Novel Coronavirus Pneumonia Epidemic issued the "Notice on Further Optimizing the Prevention and Control Measures of the New Coronavirus Pneumonia Epidemic and Scientifically and Accurately Doing a Good Job in Prevention and Control", announcing 20 measures to further optimize the prevention and control work.

The main points of the measures are as follows:

1) For close contacts, the management measures of "7-day centralized isolation + 3-day home health monitoring" will be adjusted to "5-day centralized isolation + 3-day home isolation".

2) Promptly and accurately determine close contacts, and no longer determine close contacts.

3) Adjust the "7-day centralized isolation" to "7-day home isolation" for overflow personnel in high-risk areas.

4) Adjust the risk area from "high, medium and low" to "high and low".

5) Employees in high-risk positions who have completed closed-loop operations have been adjusted from "7-day centralized isolation or 7-day home isolation" to "5-day home health monitoring".

6) In areas where no epidemic has occurred, nucleic acid testing of risk positions and key personnel shall be carried out in strict accordance with the scope determined in the ninth edition of the prevention and control plan, and the scope of nucleic acid testing shall not be expanded.

7) Cancel the circuit breaker mechanism for inbound flights.

8) For important business personnel and sports groups entering the country, "point-to-point" transfer to the isolation-free closed-loop management area ("closed-loop bubble") to carry out business, training, competitions and other activities, during which the code is assigned and managed, and cannot leave the management area.

9) It is clarified that the criterion for determining the positive of inbound personnel is the CT value of nucleic acid test <35

10) For inbound personnel, "7 days of centralized isolation + 3 days of home health monitoring" will be adjusted to "5 days of centralized isolation + 3 days of home isolation".

11) Strengthen the construction of medical resources.

12) Promote COVID-19 vaccination in an orderly manner.

13) Accelerate the stockpiling of drugs related to the new crown pneumonia**.

14) Strengthen the protection of key institutions and key populations.

15) Implement the "four early" requirements to reduce the scale of the epidemic and the time for disposal.

16) Increase the intensity of "one-size-fits-all" and layer-by-layer rectification of the problem.

17) Strengthen service safeguards for people in lockdown and quarantine.

18) Optimize campus epidemic prevention and control measures.

19) Implement prevention and control measures for enterprises and industrial parks.

20) Do a good job of evacuating stranded personnel in an orderly manner.

Legal analysis: The compensation policy for the relocation of houses for geological disasters shall be announced by the local demolition and relocation department on the compensation standards and compensation methods, including housing compensation and homestead compensation. Compensation for relocation of houses due to disasters shall be announced by the local demolition department as well as compensation methods.

If the compensation is unreasonable, effective measures can be taken to protect their rights and interests.

Legal basis: "Land Management Law of the People's Republic of China" Article 79 Units or individuals who do not have the right to approve the expropriation or use of land illegally approve the occupation of land, exceed the approval authority to illegally approve the occupation of land, do not approve the use of land in accordance with the overall land use plan, or approve the occupation or expropriation of land in violation of the procedures prescribed by law, the approval documents shall be invalid, and the person in charge and other persons directly responsible for the illegal approval of the expropriation and use of land shall be punished in accordance with law; where a crime is constituted, criminal responsibility is pursued in accordance with law. Land illegally approved or used shall be recovered, and if the relevant parties refuse to return it, it shall be punished as illegal occupation of land.

Where the expropriation or use of land is illegally approved, causing losses to the parties, they shall be liable for compensation in accordance with law.

The Coal Mine Safety Regulations, the 13th revised version, are the most comprehensive, specific and authoritative basic regulations for coal mine safety management in China, and are the embodiment of relevant national laws and regulations. The significance of the formulation is to standardize the work of coal mines, strengthen management and supervision and law enforcement, curb major and extraordinarily serious accidents, protect the safety and health of workers, ensure and promote the healthy development of the coal industry and the stable improvement of the safety situation of coal mines, and make due contributions to the country's entry into a moderately prosperous society. There are 751 articles in four articles in the Coal Mine Safety Regulations.

The first part of the General Provisions stipulates that coal mines must comply with laws, regulations, rules and regulations, standards and technical specifications related to production safety, and establish a responsibility system for production safety for all types of personnel; It is clear that employees have the right to stop illegal operations and refuse illegal commands. The second part of the underground part stipulates the safety production behavior standards involved in mining, "one pass and three prevention" management, lifting and transportation, electrical management, and blasting operations. The third open-air part regulates the standards for mining, stripping, transportation, soil discharge, landslide and water and fire prevention, electrical and equipment maintenance.

The fourth article on occupational hazards stipulates that it is necessary to do a good job in the prevention and management of occupational hazards and the work of occupational health and labor protection, so that the health of workers can be protected.