What are the consequences if the gear is not stepped on?

If you don't step on the clutch, the gear will not move and will be stuck.

If you don't step on the clutch, you won't be able to scrape at all.

The car shouldn't move, after all, he didn't step on the clutch and didn't give him force.

The car will definitely not move, and it will probably have a lot of wear and tear on the car.

The car can't run without gas, so I guess I'll have to stay where I am.

This shouldn't have a big impact, it's just a lack of motivation.

It should not be able to pull the manual lever and not be in gear.

You can't get into gear without stepping on the clutch.

It's just stuck, and it can't be fired.

There's no way to change gears, and it won't change at all.

If you can't start it, you can't start the car.

If you don't step on the clutch gear, you will damage the clutch plate, and the gear is not accurately hooked in. It will hurt the transmission, and the clutch is not pressed to the end, indicating that the gear has not been completely separated. The gears of the gearbox will be worn out, and the model with a manual transmission will be kept in this way for a long time, which will reduce the life of the gearbox.

The left foot quickly stepped on the clutch, and before the clutch pedal was stepped on to the end, halfway or a little left, the right hand was immediately put into gear, and a very harsh sound was heard under the car, and the "hiss" sound could not be hung up.

When the vehicle starts without a chain circle, the engine and gearbox are not turning, and the gears between the gears are relatively stationary.

During the vehicle driving, the engine and gearbox are rotating, before shifting, step on the clutch, so that the engine and the gearbox are disengaged, so that the rotation of the gears in the gearbox and the engine speed are not related, at this time the gear shift, can basically ensure the smooth transition between the meshing gears, when the clutch is released, although the engine speed and the gearbox speed are different, but the impact of this difference can basically be offset by the buffer spring in the clutch. The vehicle is driving without stepping on the clutch to shift gears, at this time, the two meshing gears are disengaged, one continues to rotate with the speed of the engine, and the other end is waiting for the gear to be meshed in the car itself to stop the speed of the Kai Li, the speed difference between them will make the moment of shifting gears will give a great impact to the gears that are not fully meshed, causing damage to the gearbox. In order to smooth the shift and reduce the wear and tear of the transmission shift mechanism and clutch, the "two-foot clutch shift method" is recommended.

Photo by Cao Bo) @2019

No clutch shifting is only for veteran drivers. The gearbox of the modern Jingdai car has a synchronizer, which can make the driving gear and the driven gear rotate at almost the same speed, so the gear shift is better. Veteran drivers can feel the same speed, so they can change gears without stepping on the clutch.

However, most ordinary people can't do this. It is recommended that you do not easily try to change gears without stepping on the clutch, which may directly damage the gears in the gearbox.

When shifting gears, be sure to press the clutch pedal quickly and press it all the way down.

The clutch belongs to the drivetrain and is installed between the engine and the gearbox.

The clutch pressure plate is fixed to the flywheel of the engine, and below the pressure plate is the friction plate of the clutch.

There is a spline in the middle of the friction plate to fix a transmission shaft, which is the power input shaft of the gearbox.

Clutch plates wear out with increasing mileage, so clutch plates need to be replaced regularly.

Replacing the clutch plates is very cumbersome. When replacing the clutch plates, it is necessary to disassemble the connection between the gearbox and the engine, and then the entire gearbox needs to be hoisted down. Only then can the clutch plates be replaced.

If you maintain the correct driving habits, the clutch plates of most cars can last up to 100,000 kilometers.

If the driving habits are not good, it may take 60,000 to 80,000 kilometers to replace the clutch plates.

Millions of car purchase subsidies.

The gearbox of modern cars has synchronizers, and the synchronizer can make the speed of the driving gear and the driven gear almost the same, so it is easier to get into gear. The old driver can feel the same speed at this point, and the accompanying Tong can shift gears without stepping on the clutch.

However, most ordinary Lumaitan people can't do this, and it is recommended that you don't easily try to shift gears without stepping on the clutch, which may directly break the gears in the gearbox.

Be sure to press the clutch pedal quickly and all the way down when shifting gears.

The clutch belongs to the transmission system, and the clutch is installed between the engine and the gearbox.

The pressure plate of the clutch is fixed to the engine flywheel, and below the pressure plate is the friction plate of the clutch.

There is a spline in the middle of the friction plate, which fixes a transmission shaft, which is the power input shaft of the gearbox.

Clutch plates wear out as the mileage increases, so clutch plates need to be replaced regularly.

Replacing the clutch plates is very troublesome, and when replacing the clutch plates, you need to disassemble the connection between the gearbox and the engine, and then lift the entire gearbox down, only then can the clutch plates be replaced.

If you maintain the right driving habits, the clutch plates of most cars can be used for 100,000 kilometers.

If the driving habits are not good, it may take 6 to 80,000 kilometers to replace the clutch plates.

This is because the speed of the driving gear and the driven gear is the same, but we do not advocate this operation, because the speed of the driving gear and the driven gear is always difficult to master. When shifting gears, you still need to press the clutch pedal. The clutch is the transmission system of a car, and its role is to connect or disconnect the engine and transmission.

After the driver presses the clutch pedal, the clutch can be disconnected, and after the clutch pedal is lifted, the clutch can be connected.

The clutch is installed between the engine and the gearbox.

The clutch pressure plate is fixed to the engine flywheel, and there is a clutch plate between the pressure plate and the flywheel.

There is a spline in the middle of the clutch plate that can hold a propeller shaft, which is the power input shaft of the transmission.

Clutch discs are wearing parts and need to be replaced regularly. As the distance traveled, the clutch plates may wear out.

After the clutch plates are worn to a certain extent, they need to be replaced.

If it is not replaced, it will affect the slippage of the clutch plates.

If the clutch plate slips, it will affect the power of the engine and cannot be completely transmitted to the transmission, thus affecting the situation of insufficient power of the car.

If you want to replace the clutch plates, you need to disassemble the connection between the engine and the transmission before lifting the ignition transmission from the car.

Millions of car purchase subsidies.