Why does the signal become weaker after the router passes through the wall?

Because the wall blocks the signal of the router.

Because the wall blocks a certain signal, it becomes weaker.

Because the wall will block the signal from the router, it will be weakened.

This is the result of the wall blocking the signal.

Walls can hinder the propagation of various signals.

Because the signal is lost after passing through the wall, the signal will be weakened.

Because the wall will have a certain blocking effect on the signal.

Because something blocked some of the signal, it became weaker.

Any signal that passes through the wall will be weakened.

Because its signal is cut off.

1. Connect the two routers with network cables, one into the LAN and the other into the WAN port of the new router.

2. Put the newly added router in a location with a bad signal.

3. Press and hold the reset hole with a needle for 3-5 seconds to reset the router.

4. Find the wifi signal without the password and connect to it.

5. Enter the management page and set the management password.

6. The Internet access mode is changed to automatic acquisition.

IP Conflict: The IP addresses of the primary router and the extension router cannot be the same, so it is best to turn off the DHCP of the bridged slave route.

Compatibility issues Using a different router can cause a wireless network.

Incompatible. It is strongly recommended to use a router of the same brand and model for bridging as much as possible.

Band (Channel) Interference Bridging routes use different frequency bands, but it's best not to use band 6, because many default routers use band 6.

SSID interference SSID cannot be set to the same, DHCP cannot be set to the same, everything else must be set to the same, including the encryption method. Router bridging can affect internet speed.

1. IP conflict.

The IP address of the primary router and the extension router cannot be the same, so it is best to turn off the DHCP of the bridged slave router.

2. Smile on compatibility issues.

Using different routers may result in incompatible wireless networks. It is strongly recommended to use a router of the same brand and model for bridging as much as possible.

3. Frequency band (channel) interference.

Bridged routes use different bands, but it's best not to use band 6, as many default routers use band 6.

4. SSID interference.

The SSID cannot be set to the same, DHCP cannot be set to the same, everything else must be set to the same, including the encryption method.

A router (also known as a pathfinder) is a computer network device.

It is able to transfer data to its destination through a network of packages (selecting the path of the data), a process called routing. A router is a device that connects two or more separate networks, and the routing works in the OSI model.

The third layer is the network layer.

A router is a router that connects various LANs and WANs on the Internet.

It will automatically select and set the route according to the situation of the channel, and send the signal in the order of the best path. The router is the hub of the Internet, the traffic police.

At present, routers have been widely used in all walks of life, and various products of different grades have become the main force to realize the internal connection of various backbone networks, the interconnection between backbone networks, and the interconnection between backbone networks and the Internet. The main exciting difference between a route and a switch is that the switch occurs in the OSI reference model.

Layer 2 (the data link layer, while routing takes place at the third layer, which is the network layer. This difference determines that routers and switches need to use different control information in the process of moving information, so the way they achieve their respective functions is not exactly the same.

What should I do if the signal of the router at home is poor? A simple trick can be easily solved, and the signal becomes faster in an instant.

Encrypt your router signal and then set the coverage area of your router to solve the problem of weak signal.

For the router, we can't put it next to other appliances, which will affect the acceptance effect. Because the electrical appliance needs to emit radio waves, it can disrupt the signal of the router, and if it is used for too long, the signal will become very poor. Don't put metal supplies next to it, as these will cause the network to become very slow.

Try to choose a router with a strong ability to transmit signals, no matter how large the area, it can be covered by this signal.

To solve the problem of weak signal of the router, I think you can use a signal booster, or change to a *** router.

High router transmit power. Keep the router away from other radios. The router is placed in a high place. Change your password regularly to prevent others from surfing the Internet. Power on and restart the router frequently.

If you find that your router's signal penetration ability is weak, it is recommended that you use a router with higher power and stronger signal penetration ability.

We know that the closer you are to the router, the stronger its signal will be. So if you want the wireless signal to cover every part of the room evenly, then we should place it in the middle of the home, so that the router can transmit the signal to all corners and users can have a good experience.

It is best not to place the router in a microwave oven, induction cooker, stereo and other magnetic equipment, and for the sake of health, try not to place the router next to a chair or bed.

The placement of the router antenna is also particular, the antenna needs to be placed vertically, whether it is placed on a table or a wall, the antenna is vertically ground.

If the antennas of the router are placed randomly, the antennas will interfere with each other and affect the transmission of signals.

We commonly use, generally there are 13 channel options, if there are more devices nearby are working on this channel, it will lead to poor transmission effect of the channel. Nowadays, most routers claim to automatically adapt to the best channel, but they are all adapted when they are first turned on, and as they are used for a period of time, the optimal channel changes, and the router does not adapt with it.