How to maintain a Canon digital camera and how to maintain a DSLR camera?

1. Avoid water

The biggest enemy of DSLR cameras is the erosion of water vapor, which can cause varying degrees of corrosion or oxidation to the electronic components inside if accidentally ingested into water or exposed to humid air when not used for a long time. If you need to shoot in a scenic area with a waterfall, the air humidity is high, and you should avoid rain, splashing, and falling into the water. Secondly, to avoid exposure to humid air, it is recommended to put desiccant inside the box or sleeve where the DC is placed.

2. Shock absorption

When shooting, try to hang the camera strap around your neck to prevent the camera from falling due to unstable holding. Secondly, when placing the camera, you should find a stable place to place the camera to prevent the camera from slipping due to unstable supports, and be careful not to let hard objects scratch the LCD or lens.

3. Avoid dirt

If the lens lens is too dirty, it will affect the imaging effect, and if the lens barrel is not properly protected, it will also enter the dust and affect the CCD light sensitivity, and the LCD will also affect the visual effect. When using a DSLR camera in a windy, sandy, and dusty environment, act quickly after shooting, put it in the case immediately after use, and be careful not to leave fingerprints on the lens during shooting.

Fourth, avoid temperature differences

To store a DSLR camera, you need to avoid high temperatures, cold environments, and avoid exposure to the air.

5. Prevent the loss of ** files

Properly protect the memory card. If possible, it is best to have a backup card. The memory card is an electronic device, and it must be kept away from strong magnetic fields, and should not be exposed to moisture and water to prevent strong impact and dropping.

6. Familiarize yourself with the digital camera in your hand as soon as possible

If you're using a digital camera, you should spend a few days taking a closer look at the digital camera you have and how it does all the features. It's a good idea to familiarize yourself with the features you're most likely to use. Only then will you be able to make the most of all the potential uses of the digital camera in your hands.

In addition, some SLR maintenance cheats are convenient for everyone to share.

First of all, the camera should not be disassembled frequently, this is because the components of the camera are extremely sensitive, and it is very likely to damage the spare parts if you are not careful, resulting in the camera can not be used normally, so after use, try not to disassemble.

Clause. 2. In order to maintain the battery life of the phase, the battery can be removed after use, so that the camera has been consuming power during the unused process, if the battery is aging, it may also lead to the leakage of the battery The acidic substances in it can corrode the camera. Therefore, when the camera is not in use, the battery should be removed and placed separately.

Clause. Third, wipe the lens with professional wiping paper, the camera is an important component is the lens, it is strictly forbidden to wipe the inside of the lens, because the dust is difficult to get into, if you find that there is dust inside, you should find a professional to deal with it, otherwise the lens of thousands of yuan may be scrapped in your hands.

Fourth, the phase should be placed in a dry place to ensure that the camera is not susceptible to moisture and corrosion to the equipment inside.

Fifth, the camera should be used every once in a while to ensure that the components inside can move and run in.

Although the camera is not as easy to wear and tear as other consumables, after all, it is also a high-precision electronic product, and it is prone to all kinds of failures if you don't pay attention to it, so how to maintain the digital camera, let's take a look!

1.Keep away from magnetic and electric fields

The digital camera is a precision equipment that integrates optoelectronics, and key components such as CCD and DSP chips are very sensitive to strong magnetic and electric fields, and strong magnetic fields and electric fields will make the functions of these components unable to play normally.

2.Clean the lens in a timely manner

Napkins are forbidden and lens paper should be used sparingly. It is best to use soft glasses cloth or suede, and do not breathe at the lens and then wipe it. When cleaning is necessary, a blow bag is the best tool, which can also be properly supplemented by a soft brush.

There is fog on the lens, and the best way is to have the lens facing up. Let the fog dissipate naturally, and if you have to wipe it with something, you can use the "suction" method.

3.Waterproof and anti-foggy

Digital cameras are inherently afraid of water. Humidity is taboo, fog is nemesis, and water is mortal enemy. In case of rain, snow, or fog, pay attention to put away your camera, and it is best not to take photos in the rain. In places with heavy water vapor, such as the riverside, you should also pay attention to protecting the camera.

4.Protect against cold and heat

Neither a hot or cold environment is good for a digital camera. In summer, after taking out the camera from the air-conditioned room, try not to use it outdoors immediately to avoid sudden cold and heat, which will cause condensation of water vapor on the body. In summer, it is necessary to pay attention to the heatstroke prevention of the camera, and it should not be used for a long time.

5.Do not take strong lights

The digital camera adopts CCD or CMOS solid-state imaging equipment, which has the advantages of light weight, low power consumption and long life. Another feature is that it has a strong resistance to strong light and high temperatures. Even so, its ability to receive bright light is limited.

In order to ensure the quality of the shooting and the imaging device is not damaged, do not shoot directly in sunlight or strong lights.

6.Shockproof and shockproof

The shockproof ability of digital cameras is far less than that of film cameras, and vibrations are taboo, so it is best to put them in the original camera bag when you go out with the camera, and do not run wildly. Prevent accidental bumps and bumps as much as possible. Whether you're storing your camera or carrying it with you, keep it securely and in a place where it's not likely to be impacted.

7.Dustproof and dustproof

Dust is also the enemy of digital cameras. Try not to use the camera in a dusty environment, and if you must use it, close the lens cap immediately after taking a photo and put it in a dustproof bag. Lenses should be cleaned frequently.

Never turn on the body, once dust falls on the CCD, your camera may be "dead".

(1) Operate in strict accordance with the instructions

Precision of digital cameras'Instrument, complex to operate. Therefore, it is necessary to operate in strict accordance with the operation steps of the manual, otherwise it is very easy to malfunction and crash.

(2) Protect the memory card

The memory cards of digital cameras are very small, and they are very thin, which is very easy to break, and the metal interface piece on the base is very easy to be contaminated and scratched, so the safest way is to put the memory card in a special box and in the camera. Usually, it must be said that the memory card should be stored in a dry environment, and the memory card with image files should be stored as far as possible away from magnetism and high temperature.

(3) Protect the LCD screen

Generally, digital cameras have LCD screens, and during use, some fingerprints or other dirt that are not easy to wipe off may be sticked, in addition to gently clicking with a software cloth, transparent adhesive paper can be used on the LCD screen to avoid the screen being scratched and affecting the image observation.

(4) When connected to the computer, the operation should be powered off

When you want to transfer an image from a digital camera to a computer, you need to connect the digital camera to the computer with a wire. Be sure to turn off the computer and digital camera before connecting it to avoid damaging the digital camera by operating it with electricity.

(5) Put the camera in your bag.

First of all, you'll need a sturdy, easy-to-use camera bag for your camera, digital memory card, battery kit, and more extravagantly, a secondary lens or a small portable tripod.

Leading manufacturers of camera bags such as Tamrac, Lowepro and Domke use high-quality raw materials, better shock protection and excellent straps and metal hardware. These devices have been reduced in size to make them more suitable for placing digital cameras.

(6) Cleaning skills of the lens

The camera lens is a very delicate part, and its surface is treated with anti-reflection and anti-reflection coating, so you must pay attention not to touch it directly with your hands, because this will stick to oil stains and fingerprints, which is very harmful to the coating, and will also have an impact on the quality of the digital camera.

After the camera is used, the lens will be more or less dusty, and the best way is to blow it off with a blowing balloon or gently brush it off with a soft-bristled brush. If you can't blow it or brush it off, then use a special lens cloth or lens paper to wipe it gently, but remember one rule, that is, do not wipe the lens until you have to. Never clean the lens with seemingly soft paper such as paper towels, which contain wood pulp that can easily scratch the coating and seriously damage the fragile coating on the camera lens.