Where should the gear be when an automatic transmission car is on for a long time

Updated on Car 2024-02-09
17 answers
  1. Anonymous users2024-02-05

    Hello, it's best to put it in the P gear for a long time, if it is within 5 minutes, it is also possible to put it in the D gear, I hope mine can help you, I wish you a happy car! [Car questions, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

  2. Anonymous users2024-02-04

    Hello! It's in P or N gear. I hope mine can help you and have a great day! [Car questions, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

  3. Anonymous users2024-02-03

    Hello, should be in the p position. I wish you a happy use of the car [Car questions, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

  4. Anonymous users2024-02-02

    Neutral gear, P gear is OK, as long as it is not in D, R on the line, can reduce transmission wear,

  5. Anonymous users2024-02-01

    Hello, both P and N files are fine.

    I hope it can help you, I wish you a happy car [car questions, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

  6. Anonymous users2024-01-31

    Hello, it should be hung in the P position for a long time.

  7. Anonymous users2024-01-30

    It should be better in the n file, or it can be in the P file.

  8. Anonymous users2024-01-29

    Hello, it is recommended to hang neutral and pull up the handbrake so that it is good for the gearbox, I hope to help you [car questions, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

  9. Anonymous users2024-01-28

    In P or N gear, it is best to pull the handbrake.

  10. Anonymous users2024-01-27

    Hello, you can hang it in n gear.

  11. Anonymous users2024-01-26

    P-gear, you don't have to hit the brakes. If you're in n gear, you'll also have to pull the handbrake. Troublesome.

  12. Anonymous users2024-01-25

    Gear: P gear is a parking gear. When the vehicle is not dusty and coarse, the gear position is in the P gear position. When the vehicle is in the family position, it is in a mechanical locking state, which can prevent the vehicle from skidding.

    Gear: R gear is a reverse gear, and you need to switch to this gear when reversing. When switching to reverse, you need to stop completely before switching to avoid shocking the gearbox.

    3. N gear: N gear is the same as the neutral nature of manual gear, and you can switch to this gear when you stop temporarily. When using N gear, it should be used in conjunction with the brake and handbrake to avoid the vehicle skidding.

    Zone: D gear is the forward gear, which is often used when driving, and it is also an important gear.

    5. S seat: S gear, also known as sports mode, can be used when overtaking or going uphill, which can keep the engine running at high speed for a period of time, giving the car enough power, but the fuel consumption is relatively high.

    Accessories: Precautions for driving automatic transmissions:

    1.Be careful not to slip into neutral:

    A lot of drivers think that sliding into neutral will save fuel, but Pai Town is wrong. Slipping into neutral gear for a long time will lead to insufficient oil pressure in the hydraulic pipeline in the automatic transmission, increased friction, reduced lubrication effect, and damage to the transmission.

    2. Trailers should pay attention to:

    If an automatic car breaks down halfway through and needs to be towed, try to lift all the cars up. If you can't lift all the cars up, you'd better hang the car in n gear to reduce the towing distance.

    3.Pay attention to gear shifting while driving:

    Self-driving cars will have interlocks for dangerous maneuvers. If the vehicle switches from D to P, it needs to be switched again after the vehicle is completely stationary to avoid shocking the transmission.

    4.Be careful not to start the engine with a trolley:

    When the vehicle cannot be started without electricity, the automatic transmission car cannot be started by the large car, so that it cannot transmit power to the engine and damage the three-way catalytic converter.

  13. Anonymous users2024-01-24

    P (parking) Parking gear P is used for parking, which is the use of a mechanical device to lock the rotating part of the car, so that the car can not move. As long as the gear selector lever is in the driving position while the engine is running, the automatic transmission car can easily walk. When parked, the gear selector lever must be pulled into the p-position, which locks the output shaft through the parking brake device inside the transmission and tightens the hand brake to prevent the car from moving.

    When the car needs to stay in a fixed position for a long time, or before leaving the vehicle after stopping, the hand brake should be applied and the paddle lever should be pushed into the "P" position. It is important to note that the vehicle must not use the P gear until it is completely stopped, otherwise the mechanical parts of the automatic transmission will be damaged.

    When you don't use it, the gear is there, and the wheels are mechanically locked to prevent them from slipping. In addition, the automatic transmission car is equipped with a neutral start switch, so that the car can only start the engine in the "P" or "N" gear, so as to avoid the car suddenly moving forward when starting in other gears. n (neutral) blank.

    The n-digit is neutral, which can be used when starting or when towing and temporarily stopping (e.g. at a red light). To prevent the vehicle from slipping on slopes, be sure to apply the brakes when in neutral. With the lever in "n" gear, the power between the engine and transmission has been cut off and separated.

    For a short pause, you can place the lever in this gear and pull the hand brake lever, and take a break with your right foot off the brake pedal. When waiting for a signal or in a traffic jam, the gear selector is often held in the D position while the brakes are applied. This is allowed if the time is short, but it is best to switch into the n position and tighten the hand brake if the stop time is long.

    Because the gear selector lever is in the driving position, automatic transmission cars generally have a weak driving trend, and stepping on the brake for a long time is equivalent to forcibly stopping this trend, which makes the transmission oil temperature rise and the oil is easy to deteriorate. So leadership is right.

  14. Anonymous users2024-01-23

    You didn't do anything wrong, but the leader asked you to do whatever you wanted, be careful of losing your job.

  15. Anonymous users2024-01-22

    Generally, if the time is short, apply the brakes, and if the time is long, it will be 3N gear, pull the handbrake.

  16. Anonymous users2024-01-21

    It's late, only the bench is left, it doesn't matter, sit down!!

  17. Anonymous users2024-01-20

    There are generally two situations when the automatic transmission car stops and does not turn off

    1. Hang neutral gear, and you can choose it when waiting for the traffic light in a short time.

    2. If the time is long, you can hang it on the P gear, and then pull the handbrake or step on the foot brake to avoid the vehicle from slipping.

Related questions
21 answers2024-02-09

The car of automatic transmission is generally set by the computer to set the gear or automatically set the oil supply or cut off the oil is different from the gearing car, the neutral gear slide can not achieve the effect of fuel saving, and the design of the automatic gearbox is different from the gearbox design of the manual gear, the automatic transmission car can not be neutralized for a long time, so it will damage the gearbox, when the neutral gear (N gear) is coasting, due to the difference in the driving speed of the car and the engine speed, the oil pressure in the hydraulic pipeline in the automatic transmission will be insufficient, which will not only increase the friction and reduce the lubrication effect, It will also damage the friction plates inside the automatic transmission. Once the automatic transmission is damaged, it is not only expensive to repair (the ** of replacing the new box will generally reach 5 figures), but also the maintenance is complicated, and it is necessary to go to a professional transmission maintenance station, and the number of such repair stations in China is very small. At the same time, the entire vehicle cannot be started and driven. >>>More

25 answers2024-02-09

At present, the E-class of Beijing has been replaced, and the new car is about to be launched in Germany. If it is made in China, it will have to wait until at least next year, because Mercedes-Benz will introduce an extended version at that time. The power of the 523Li is better than that of the E230, after all, BMW's inline 6-cylinder is not in vain, it runs smoothly and has good power performance. >>>More

4 answers2024-02-09

There are paddles under the steering wheel, left minus right plus, change manual to dial down the downshift paddles first, and the dashboard will show how many gears.

25 answers2024-02-09

BYD you said that this ** is 10,000 yuan Accent you said that this car's ** is between 10,000 BYD's advantages are: fashionable and beautiful, strong power. Disadvantages: The appearance is a bit plagiarized from the flower crown. >>>More

18 answers2024-02-09

Landlord: For the description of the above vehicle phenomenon, the vehicle condition and maintenance cases in this environment, there should be no problem with the car inspection index, if you ensure that there is no problem, it is recommended to go to the maintenance shop to check the throttle voltage value and the air-fuel ratio of the control unit, if the voltage value is too high or the air-fuel ratio is beyond the standard range, then the air intake system and fuel injector can be cleaned, I wish you a smooth pass.