On the issue of installing Wi Fi in school dormitories

Then look at the bandwidth you bought! The next bedroom will definitely be able to receive the signal, and the theoretical transmission distance of wireless routing is 100 meters. The actual is 50 to 80 meters.

A 10Mbps one can carry 7 or 8 laptops. But don't let anyone use Thunderbolt, as soon as you use it, it will all be disconnected.

It is recommended to use the wireless router made by the school, which is fast and cheap. The school's is fiber.

It's a bit messy to watch

It's OK to make a wireless router, and then set a password on the route, and others can't use it to find the route

Whether there are many people or not has something to do with the bandwidth of your school

The wireless router can set an access password, and the next door can't find the network without knowing the password. The setup method is similar to that of a normal router.

It can be used within a range of 50 meters.

If you're afraid that someone else will use your bandwidth, you can set a password that only you know.

The setup is very simple, and the general wireless router has a manual, don't worry about telecommunications, because the wireless router he doesn't care.

It also depends on what kind of Internet access method your school has, if you want to enter the account password, you can't.

There must be a separate ** line to be able to telecom, and the forbidden route is limited to the number of units, and you don't need 4 units.

Set a password on the route, you can bind it to the IP in it.

Broadband installation in dormitories:

1. There is no ** line interface to mobile, Netcom or telecom operators.

Application. And if the school allows, you can let the installer go to the dormitory to install broadband.

2. When the master will be the network cable and the light modem.

Once you've got it, if you want to use your wireless network, you'll need to buy your own wireless router.

to install. With Wi-Fi installed, the dormitory is accessible to all.

First of all, we need to prepare four things:

1. Router.

2. Telecommunications, mobile broadband and passwords.

3. Computers and mobile phones.

4. Broadband connection line or optical fiber connection line.

The specific steps are as follows:

1. Connect the broadband network cable or optical modem to the WAN port of the router, and connect the LAN port to the computer.

2. Confirm that the network cable is connected, after starting the device, open the browser, and enter the router IP in the address bar to enter the wireless router settings interface. (If you can't get in, please look at the nameplate at the bottom of the router or the router instruction manual, the default settings of different models of routers are different.) ）

3. An account and password for logging in to the router appear on the settings interface, enter the default account and password admin, confirm that it is correct, and click Confirm. You can also refer to the manual.

4. After successful login, there will be an interface to select the setting wizard, and then a window will pop up to explain that you can set the basic parameters of the router through the wizard, and click Next directly.

5. Find "Wireless Settings" and then, it is time to set the password of wifi, set a difficult password that is easy to remember, and then click to confirm. Prevent others from rubbing the Internet and affecting the Internet speed.

6. After the setting is successful, it will prompt whether to restart the router, select to confirm the restart of the router, after restarting, take out the mobile phone or turn on the computer, find the wifi name, click to connect, enter the wifi password set before, confirm, and you can access the Internet.

Just install a router.

Install a wireless router.

1.Connect, plug in the power adapter of the router, and connect the network cable (one end is connected to the dormitory port (ports 1 and 3 are open), and the other end is connected to the router WAN port (usually yellow). If you use a wired router, you need to use another network cable to connect the computer network card to the router LAN port (usually blue or white).

2.Computer settings, then right-click on the wireless network connection, select Properties, pop up the window shown in the figure below, select Internet Protocol (be careful not to remove the previous check), and then click the Properties button.

3.Open IE (the E icon that is usually opened on the Internet), enter it in the IE address bar, and then press Enter, a small login page with a username and password comes out, the initial username and password are admin, after entering, click OK to enter the router settings interface.

4.After entering the router settings interface, you will be prompted to enter the account and password of Unicom or Telecom to the operator in the middle of the page (that is, the account and password you use to dial), fill it in, and click Save Router to set up. Close the webpage and open the webpage to access the Internet.

No, just buy a wireless router and you're good to go! The network cable is plugged directly into the wireless router and you're good to go.

Different routers have different settings, so it is recommended to ask other students! Or the people who manage the school's network! Help can be obtained!

As long as you buy a wireless router, and then configure it according to the manual, there should be such a master among your classmates!!