ADSL connection to router transient disconnection

Determine that the problem should not be with the router, but with the modem.

The solution is to go to the business hall and replace the modem for free.

If there is still a disconnection problem, it should be repaired and the repairer of the telecommunication segment should check the line.

It should be said that it is the problem of the telecommunications bureau.

There is a problem with the cat, there is a problem with the computer, check it all.

Summary. Not necessarily, connect to the wireless router, wifi Internet access is often dropped, the possible causes and solutions of the network: 1. Channel congestion.

Channel congestion can cause network abnormalities, slow speeds, and increased latency. 2. It is impossible to send and receive at the same time. The WiFi network cannot upload and ** data at the same time, resulting in the disadvantage of data latency in the network itself.

If many devices use the network at the same time, it will cause uploads and ** "fights", and the channel will be overused and the network speed will be reduced. 3. The background application of the software occupies the network speed. Check whether there is software in the background to synchronize data and**, for example, cloud storage software will automatically upload data under wifi.

Most of these apps work in the background and are overlooked by users, but they are taking up a lot of traffic. 4. The router wifi is weak. The placement of the wireless router has a big impact on the WiFi signal strength.

Poor placement will lead to a weak wifi signal.

Can you elaborate on that a little bit more?

Not necessarily, connecting to a wireless router, wifi Internet access, often dropping and disconnecting the network after rolling and disconnecting, possible causes and solutions: 1. Channel congestion. Channel congestion can cause network abnormalities, slow speeds, and increased latency.

2. It is impossible to send and receive at the same time. The WiFi network cannot upload and ** data at the same time, resulting in the disadvantage of data latency in the network itself. If many devices use the network at the same time, it will cause uploads and ** "fights", and the channel will be overused and the network speed will be reduced.

3. The background application of the software occupies the network speed. Check whether there is software in the background to synchronize data and**, for example, cloud storage software will automatically upload data under wifi. Most of these apps work in the background and are overlooked by users, but they are taking up a lot of traffic.

4. The router wifi is weak. The placement of the wireless router has a big impact on the WiFi signal strength. Poor placement will lead to a weak wifi signal on the side of the limb.

Unstable operator network will lead to unstable network access to broadband, which will lead to instability of wifi. When carriers perform network maintenance and upgrades, network instability occasionally does not occur. 2.

The signal is interfered with, the home wifi is intermittently disconnected, and it may be due to external signal interference, and the signal is purely interfered with by the fiber, resulting in the wifi not working normally, and it will return to normal after the interference. But if it keeps appearing....3.

If someone rubs the network wifi and is rubbed into the network, there are too many users or users are blocked, which will cause the wifi network to be congested, and the network speed will be very slow, or it will be squeezed out by other users, and there will be intermittent disconnection of wifi. OK. 4.

Internet equipment wifi connection problem Internet equipment wifi connection problem will also lead to wifi intermittent disconnection, other people's Internet equipment in the family is normal Internet access, only your problem, that is yours.

Summary. Is it a problem with the router to break the network every two or three days, and after a computer in the network is poisoned, frequent data packets are sent and the network is blocked, and other computer networks in the network will be intermittent. Look to see if there are any big appliances next to the router, as this is also a signal that may trigger Wi-Fi.

The aging of the router or switch transformer causes the internal components of the router to work unsteadily, and the router is getting better and better, and the quality is not as reliable as before. What's more, many software on the computer will occupy the network channel, and sometimes you don't know if you don't pay attention to it, so you can close it.

Is it a problem with a router to disconnect the network every two or three days, and after a computer in the network is poisoned, the network is blocked due to the frequent and parallel delivery of data packets, and the other computer networks in the network will be intermittent. Look at the router to see if there are any big appliances next to it, as this is also a signal that may ignite Wi-Fi. The aging of the router or switch transformer causes the internal components of the router to work unsteadily, and the router is getting better and better, and the quality is not as reliable as before.

What's more, the software on many computers will occupy the network channel, and sometimes you don't know if you don't pay attention to the beam, so you can turn it off.

It is generally caused by carrier lines, cats, routers, etc.

This phenomenon can be due to the following reasons:

1. There are too many obstacles between the device and the wifi hotspot, and the wifi signal strength is strong and weak, resulting in a transient disconnection;

2. There are other routers near the wifi hotspot that use the same frequency band or channel, resulting in channel interference;

3. There is a problem with the wireless module of the device connected to the wifi, and the wifi cannot be stably accessed;

4. There is a hardware problem with the router itself, which causes the signal to be strong and weak.

First try to encrypt the router wirelessly.

Turn off or not (some can set multiple SSIDs can set another SSID that does not need encryption), if this is no problem, set the encryption level low, or do not use WPS mode like WMM optimization WPS mode (like Cisco routers have this kind of option), try to try as little "load" as possible.

Regardless of the size of the brand, there is also a flow load limit This problem can be summarized as follows:

Your wireless routing prevents the location from not reaching the optimal coverage, and you need to adjust the downward direction and orientation of your service provider, resulting in line interruption.

The routing is not friendly to mobile phone access, which may be a problem with wireless settings.

It's a broadband issue. Or the quality of the router is not good.

Reset the wireless router: (The router will take a long time.)

If there is a malfunction, reset the router and set it up again and the problem will be solved) 1Change the local connection to automatically get an IP address.

2.When the wireless router is plugged in, do not connect the "modem" (modem) first, reset the wireless router (restore to the factory), connect the computer to any "LAN" port of the wireless router, enter the settings page, and set it according to the PPPoe (ADSL virtual dialing) method. Then set the SSID, encryption method, and password.

Save, restart. After setting up, connect the network cable from the "cat" to the "WAN" port of the wireless router.

Upgrade your router's firmware.

Or reset your router.