Does the rear seat of a mountain bike affect the aesthetics?

Hehe, let's correct it first, this is called a shelf, and it is loaded. It's not a seat, so it can't be called a back seat.

Some of the installed (expensive) ones are still quite good-looking, and this depends on the specific combination. Generally speaking, it is not loaded, especially in the mountains, and it is very difficult to play off-road, but there is nothing to ride on the road.

The slender shape of a road bike is very ugly on a thick shelf. Unprofessional.

Are you talking about the rear frame, I installed it before, to be honest, it didn't look good, I removed it later. Unless you are traveling with a bag and taking people (the back frame of a mountain bike is generally made of aluminum alloy, the load bearing is very small, and you can't often carry it), it is best not to ride it yourself. It's really not pretty.

Specifically, if the upstairs is a rear shelf, and it is not suitable for carrying people. Because of the characteristics of bicycle riding, it will be very uncomfortable to carry heavy loads, uneven force, etc. Short-distance don't feel that if you go up to 100 kilometers a day for long distances, no matter what advanced harness system you buy, your whole shoulder and back will be very uncomfortable.

So at this time, the rear shelves and camel bags are needed to solve this problem.

It can be used for long-distance travel, and if you like mountain and forest off-road mountain bikes, you like to simplify the principle of removing all unnecessary weight, such as rarely seeing a tripod can also avoid the chance of accidents.

Well, it's still good to install the back seat, I've seen people install it, and it's still pretty good.

Putting the back seat on it is not a good car.

Yes, it can be added. There are also those that specialize in selling the back seat of mountain bikes, and the safety is basically no different from ordinary ones.

But mountain bikes with the back seat will not be suitable, first of all, mountain bikes generally pursue lightweight, and the body of the rear seat will be heavier, and secondly, it is very laborious to pull a person to step on the back seat of a mountain bike. Because it is a lightweight aluminum alloy, it is easy to injure the frame when carrying people.

Yes, but there are different types of shelves, some are installed directly on the frame reincarnation slag and the seat post, and there is another that is only installed on the seat post.

Here are the installation steps:

1. First introduce the two screws at the bottom of the rear shelf, these two screws can control the length of the rear shelf, and the entire rear shelf can be lengthened or shortened by tightening these two screws.

2. Then there is this short stick, which is to connect the body and improve the stability of the rear shelf.

3. Finally, there is this curved iron rod, which is designed to return to the toll, so that the hook of the tote can be hooked on the top to stabilize the tossel.

4. First of all, fix the screws and iron shown in the figure below on the back of the frame, and the iron of the two holes is to connect with the iron rod, so the holes are facing up.

5. Then connect the mouth of the iron rod to it, the screw in the middle of the iron rod can adjust the length of the iron rod, remember that the screw of this step should not be tightened too tightly, and then tighten it after a while.

6. Fix the rear shelf on the iron pipe of the saddle, adjust the height, connect the iron rod and the shelf, and tighten the screws.

Most mountain bikes are OK.

However, it is generally not recommended to install a rear seat on mountain bikes, which are only suitable for loading some lighter weight.

It can be loaded, about 100 yuan, Jantree must have it, because this is a huge profit!

You can definitely add seats, there must be no problem with carrying people or something, more than 3000 cars should still have shelf holes, but the quality of the shelves should be picked a little better, choose the kind of shelves with three fulcrums installed on the shelf holes, it doesn't matter if they are heavy. It's about 100 online.

What do you mean to put on the shelves after loading... It can be able to hold the weight of the person you want to replace.

If two people add up to more than 300 pounds, it's best to forget it... The frame can't stand it.

Yes, it's the back seat, the ordinary 30 yuan, the good 150, but generally not installed, one is not good-looking, the other is that the thing is too heavy You know that mountain bikes are the lighter the better.

Generally, you can do it, whether you are a V brake or a disc brake, and the disc brake is estimated to be difficult to install.

If you want to install it, it's best to sell the back shelves of steel, and you can't buy aluminum alloys.

If there is a steel back shelf in the store, just call the master to help install it.

Mountain bike saddles can be decided based on the length of an individual's legs.

The rider sits in the saddle with the heels on the pedals (keeping the pedals in the lowest position), and if the knees are bent at this point, the saddle is low and the saddle needs to be raised appropriately. If the legs are all straight and the pedals are not reached at this time, the saddle position is too high, and the saddle needs to be lowered appropriately. The correct height is to sit in the saddle with your legs straight and your heels touching the lowest position of the pedals.

It can be installed, but the performance is reduced, and it can only be installed in the city of Qiqi, unless you can install a seat without carrying people.

Mountain bikes can be installed on the rear shelves, but the premise is not to find a random place, the main thing is to have a suitable rear shelf. It is recommended that you buy a suitable shelf and install it yourself.

Adding seats, mainly for carrying people, carrying people needs to be stronger shelves, ordinary aluminum alloy shelves can barely carry people, but they are easy to damage, and it is not recommended to use; The seat tube shelves are even worse, the load-bearing is too small; It is best to have steel shelves, which will be heavier than the first two, but they are load-bearing and not easily damaged.

Mountain bikes can be equipped with a tailstock as a seat.

You can buy a rigid rear shelf, if it is a disc brake car, buy a disc brake version!

1. It can be installed, if the strength of the demand is only with luggage, then there is the kind of tailstock (also called luggage rack, schoolbag rack) installed on the sitting rail

Second, if you want to bring people, then there must be at least three fixed points:

1.Generally, there is a reserved hole on the side of the upper part of the rear triangle of a mountain bike, or a reserved hole at the junction of the upper triangle and the seatpost, if there is none, the same strength is achieved through the "clamp ring (which is given with the tailstock made by yourself)".

2.The lower part of the tailstock can be installed on the solid screw hub, if it is a quick-release hollow screw hub, please install the reserved holes near both ends of the bottom bracket of the rear hub, if there is no reserved hole, it can be replaced by a clamp ring. However, the strength of the clamp ring here is not as large as the reserved hole.

Mountain bikes can be loaded with rear shelves, but it is not just a place to find them, the main thing is that the store should have a suitable rear shelf. It is advisable to buy a suitable shelf and install it yourself.

Adding seats, just want to carry people, carrying people needs to be stronger, ordinary aluminum alloy shelves can barely carry people, but it is easy to break, not recommended; The seat tube shelves are even worse, the load-bearing is too small; It is best to have steel shelves, which will be heavier than the first two, but they are load-bearing and not easily damaged.

Generally, it can be added. But consider the strength of the frame, otherwise it will be a tragedy.

Install a rear V-brake rack. If you can bring people, you should be stronger, and the price of the car shop is about 100 yuan.

No matter what kind of frame it is, you can add it!

The solution is to come up with!

Yes, mountain bikes can be equipped with extra seats.

Not casually. It is a shelf, about 80 yuan.

You can add it, it's not just a random one.