The router is set up but it can t connect

First of all, make sure how you connect. The cat comes out of the line and connects to the WAN port of the router, and then turns on the IE input or depending on the router manufacturer, there is in the manual).

The pop-up dialog box will be used to enter the router username and password, and the admin (in the manual) will enter the control page.

In the web settings, you will be asked to enter your broadband and password.

First check if your router is already connected to the WAN, if the connection is successful, then check if your computer and router are connected normally, and then check if your local network settings are correct.

You can reset the router and navigate the connection from the new input, without changing the router parameters, and then set the computer to get it automatically.

See if your broadband cat IP is too; If so, you can change your router IP to the next one.

MAC address binding, you can try address cloning, the cloned host is the MAC address of the computer you first used the broadband account.

The communication provider binds your network card address, and the network card address is under Kerron.

According to the Thorough Cool Virtue Compare it yourself, it should be no problem.

That's because the input method is wrong, and you can only enter it.

Here's how to set it up correctly:

2. Then you will jump to the login screen of the router and enter the username and password of the router. Click Sign in.

3. Log in to the router and find the setup wizard to open.

4. Then click Next.

5. Select PPPoE or dynamic IP and static IP in the interface that appears, and click Next.

6. If you select PPPoE, you need to enter the morning account number and password, and click Next after entering it correctly.

7. After clicking Next, it will jump to setting the wireless password, enter the wireless password, and click Next after setting.

8. Click Done, and you're done.

To sum up, there are four reasons.

1. Broadband failure:Check whether the network cable is damaged and whether the interface is plugged in steadily.

2. Setting Questions:Generally, the account or password is wrong, please check carefully.

3. Operator Restrictions:You will need to contact your carrier to resolve the issue.

4. Router problem:For the WAN interface of the router, please connect it to the network port of the modem with a network cable; If you don't have a cat at home broadband, you need to plug the broadband network cable into the WAN interface of the router.

Extended Information: How to reset your router

With your router plugged in, press and hold the reset button on your router for about 10 seconds to do a factory reset, which resets the router.

What should I do if my router is connected but I can't connect to the Internet?

If you want to access the Internet, you must set up a broadband account and password on the router, and you will be shown in the running state, and you must select pppoe in the running wizardEnter your account and password. Next, next, and finally finish restarting the router ok

Your broadband account password is incorrect.

Hey, this 、、、 if you're a notebook, help, desktops are more tired, and I want to tell you about theories, troublesome.

1. First confirm that the router and the cat are connected normally, 2. Confirm that the computer can go online after directly connecting to the cat, 3. Open the device manager of the computer system, find the network card, see if there is a yellow icon, update the wireless network card driver, 4. Set the IP to automatically obtain the IP address, 5. If everything is normal, restart the router and the cat, 6. If it still doesn't work in step 5, you must restore the router to factory settings, and reset the broadband account and password on the router settings page, 7. If all of the above methods have been used and still fail, it is likely to be a problem with the broadband side, and it is recommended to consult customer service.