How to set up a wireless router 10

There's definitely something wrong with your setup. The router is automatically dialed up, and each machine that shares the Internet does not affect each other. Dialing software is not possible.

1. Enter the routing settings interface and restore the factory settings.

2. According to the setting wizard for routing automatic dialing settings, when the Internet mode is selected, if you are ADSL broadband, please select PPPoE, enter the broadband account and password (if you are a fixed IP user, please select static IP, and fill in the IP, submask code, gateway and DNSF address provided by the network operator), complete and save the settings, exit the route, and restart the route.

3. You still need to enter the routing settings, set the wireless network security, name the wireless network, load the password, save and exit, and restart the route.

With the above operations, you should be fine.

Wireless router and cat,Open,You can go wireless.,You don't need to open other machines.,You talk about it in detail.,What is the host?

Also, whether your friend is using 3G, or other wireless hotspots

You need to go to the tp-link settings page, set your password, save it, and restart the router. That way, the router will automatically dial up later. You don't need to turn on the host again to perform manual dialing.

1. The bus of the broadband network is connected to the WAN port of the router, and the LAN port of the router is connected to the computer.

2. After starting the device, open the browser and enter the wireless router setting interface in the address bar. (If you can't get in, please look at the nameplate at the bottom of the router or the router instruction manual, the default settings of different models of routers are different.) ）

3. An account and password to log in to the router appear in the settings interface, enter the default account and password admin, and you can also refer to the manual;

4. After successful login, select the interface of the setup wizard, which will automatically pop up by default;

5. After selecting the setup wizard, a window will pop up to explain that you can set the basic parameters of the router through the wizard, and click Next directly;

6. Set up step by step according to the setup wizard, select the Internet mode, usually ADSL users choose the first PPPoE, if you use other network service providers, select the following two according to the actual situation, if you don't know how to choose, directly select the first item to automatically select, convenient for novice operations, click next after selection;

7. Enter the password applied for from the network service provider, and go directly to the next step after the input is completed;

8. Set the wifi password, try to make the alphanumeric combination more complicated, and it is not easy to be rubbed off the network.

9. After entering correctly, it will prompt whether to restart the router, select Yes to confirm the restart of the router, and you can access the Internet normally after restarting the router.

Wireless routers need to be set up according to the Internet environment before they can be used.

Different Internet environments have different ways to set up wireless routers.

If it is a fiber modem wireless router that requires dial-up, set it up as follows:

1. Plug in the wireless router, don't connect the cat first, and connect the computer to any LAN port of the wireless router;

2. Enter the IP address of the router in the address bar of the browser (on the label behind the router), and enter the login username and password to enter the settings page;

3. Set up according to PPPoE (ADSL virtual dialing) mode, enter the Internet account and password;

4. Set the SSID, encryption method and password;

5. Save and restart;

6. After setting, connect the network cable from the cat LAN port to the WAN port of the wireless router.