-
Anonymous users2024-02-061. Cloth lampshade: You can use a small vacuum cleaner to suck up the dust on the surface, and then pour some dish soap or special detergent for furniture on the rag, and replace the position of the rag while wiping. If the inside of the lampshade is paper, avoid using detergent directly to prevent breakage.
2. Frosted glass lampshade: scrub carefully with a soft cloth suitable for cleaning glass; Or scrub with a soft cloth dipped in toothpaste, and uneven areas can be treated with chopsticks or toothpicks wrapped in a soft cloth.
3. Resin lampshade: It can be cleaned with a chemical fiber duster or a special duster. Anti-static spray should be sprayed after cleaning, because resin materials are prone to static electricity.
-
Anonymous users2024-02-051. Before cleaning the lamp, the power should be turned off first, and then the lampshade or lamp holder should be disassembled. Freshly used bulbs should be cooled naturally to room temperature before cleaning, so as not to cause drastic temperature changes**.
2. When cleaning, remember not to change the structure of the lamp or replace its parts, after cleaning, just install the lamp as it is, remember to check it carefully, and there shall be no missing or wrong parts.
3. Do not use a wet rag to scrub the lamp holder, otherwise it is easy to leak electricity; You can use light-colored cotton socks or double bath towels to turn them over and put them on your hands and gently wipe the lamp.
4. If the chandelier decoration at home is complicated, you can turn off the power and wear a pair of white cotton gloves to wipe it after the lamp cools down. Make sure the gloves are dry and wet. Wipe the dust off with wet gloves first, and then dry it with dry gloves, and your hands will work together to wipe the chandelier clean.
How to maintain lamps at home?
1. Correct installation is the premise.
Proper installation of luminaires is a prerequisite for extending the service life of luminaires. If not installed correctly, the lamps can easily break, sometimes even **, which is very dangerous. In the home, special care should be taken in the installation of bathroom and kitchen lamps.
The lamp in the bathroom must be equipped with a moisture-proof lampshade, otherwise the service life of the lamp will be greatly shortened; Kitchen lamps should pay special attention to anti-oil smoke, because the accumulation of grease will affect the illumination of the lamp; The light-colored lampshade is wide and has better light transmittance, but it is easy to stick to the ash, so it is necessary to wipe it diligently, so as not to affect the penetration of the light; And generally speaking, do not place the lamps in the kitchen and bathroom in a location where moisture is likely to condense to avoid bursting.
2. Replace the lamp as soon as possible before aging.
The lamps and lanterns that have been used for a long time will be red or have black shadows at both ends, so they should be replaced in time to prevent unsafe phenomena such as ballast burning. Generally speaking, when buying lamps, the effective time will be marked on the tube bulb, and regular replacement of aging lamp bulbs is very helpful for overall lamp maintenance.
3. The cleaning method should be correct.
After the lamps are used for a period of time, a thick layer of ash will be precipitated on them, which will affect our vision, so it is inevitable to clean them regularly, so pay attention not to change the structure of the lamps and lanterns in the process of cleaning, and do not replace the parts of the lamps and lanterns casually.
If the lamps are non-metallic, they can be wiped with a damp cloth to avoid dust accumulation and hinder the lighting effect.
4. Frequently turn on and off the most hurtful lights.
Do not switch on and off frequently when the lamp is in use, because the current through the filament is greater than the current during normal operation at the moment of frequent start-up, which makes the temperature of the filament rise sharply and accelerate the sublimation, which will greatly reduce its service life, so it is necessary to minimize the switch of the lamp.
1. Wash the car body (1) Do not wash the car on a rainy day, especially waxing, even if it is a sunny day, do not wash the car under direct sunlight, because the sun's rays on the water droplets will damage the paint surface. (2) Turn off the engine before washing the car. (3) Rinse away easily cleaned stains with plenty of water. >>>More
Tools needed: 1 bottle of white vinegar, 1 scouring pad.
This method can be used to clean up limescale in all kinds of pots and pots. >>>More
1. If the iron pot is rusty, you can heat the iron pot and wipe it off with a cloth dipped in vinegar, which is simple, fast and thorough. Don't wash it too clean every time you use it, and leave some oil to prevent rust. You can heat the iron pot first, then pour in a little oil, smooth it evenly with a spatula, then turn off the heat, and when you use it the next day, rinse it with water. >>>More
The methods and steps for cleaning the car air conditioner at home are as follows: >>>More
With the continuous improvement of people's level of awareness, people consider more factors when choosing housing, and the quality of feng shui has become one of the key considerations when people choose housing. In the countryside, you can see that every household has big trees planted in their basic yards, and there is such a saying that it is not suitable to plant big trees in rural feng shui courtyards. There are a lot of particularities in rural feng shui courtyards, and how to arrange rural courtyard feng shui is better, so let's briefly introduce it. >>>More