What should I do if I have a page file configuration problem when I start up my computer?

Win7 boot prompts that there is a page configuration problem when starting the computer,This problem can be solved by setting virtual memory,It is best to set the virtual memory in other logical disks other than the system disk。

Programs running on a computer need to be executed through memory, and if the program is executed that takes up a lot of memory or a lot, it will cause the memory to be depleted. To solve this problem, virtual memory technology is used in Windows, that is, a portion of the hard disk space is used as memory usage.

Precautions for using computers

1. Correct power on and off.

After the computer is turned on through the power button, the data generated by the computer system software and application software during operation flows in the form of electric current in the computer hardware circuit.

If the power is suddenly cut off at this time, then a strong shock wave will be generated, indicating that the current of the data may be tampered with due to the impact of the shock wave, causing loopholes in the system data, and the system may not be able to operate normally over time. Therefore, when we shut down, we should use the shutdown button in the start menu for hot shutdown, instead of using the power button for cold shutdown.

2. Moisture-proof. Computers are like all electronic equipment, if they are in a humid environment for a long time, they will cause a chemical reaction to the copper in the circuit, resulting in poor contact of the circuit interface and the computer cannot operate normally. Therefore, electronic devices need to be turned on frequently to allow the computer to generate heat to evaporate the moisture inside.

If you accidentally get water into the computer, you should directly unplug the power socket, then open the computer shell, remove the obvious moisture inside, and finally can not be exposed to the sun directly, you should use a hair dryer to dry it with cold air, and put it in a ventilated and cool place to dry.

3. Dustproof. When the computer is in use, the magnetic field generated by the current will absorb the tiny dust in the air, causing a large amount of dust to accumulate on the CPU and vents, which greatly reduces the heat dissipation effect of the computer. So, you should open the case of the CPU area every 1 year and use a dry, soft-bristled brush to clean the dust from the CPU, heat pipes, and vents.

4. Anti-magnetic. Since the current will be affected by the magnetic field, the computer should be used as far away as possible from objects that can generate magnetic fields or strong electromagnetic waves, such as strong electrical equipment, magnets, etc. In addition, some electronic devices, such as mobile phones, also generate strong electromagnetic waves when they are turned on.

Here's how to deal with it:

1. Right-click on My Computer, pop up the menu and click on the "Properties" command. On the System Properties screen, switch to the Advanced tab.

2. Click the "Settings" button in the user profile bar.

3. Select the small configuration file in the configuration file box stored on the machine, and click the "Delete" button.

Extended Material: Local User Profiles. Created when the user logs in to the computer for the first time, this local user profile is stored on the computer's local hard drive.

Any changes made to the local user profile will only affect the computer that made the change.

Roaming user profiles. A copy of the local configuration file is replicated and stored on a server share on the network. This file is ** each time a user logs on to any computer on the network, and any changes to the roaming user profile are synchronized with the server's copy when the user logs off.

The roaming user profile requires that the computer be a Windows NT domain or Active Directory?of a member.

Enforce user profiles. is a special type of profile that allows administrators to specify special settings for users. Only the system administrator can make changes to the mandatory user profile. When a user logs out of the system, the user's modifications to the desktop are lost.

My answer is as follows, please be patient and look at <>

There are usually several possible reasons for configuration problems with computer pages or files:1Corrupted or missing system files or browser files.

You can try system restore, browser reset, and clean up your browser cache and browsing data. It is also possible to reinstall the system and browser software for a full repair. 2.

Driver issues. If you upgrade the Windows system or browser but do not update the driver, configuration issues may occur. You can go to the official website of the corresponding software** for the latest driver update.

3.Memory overflow. Your computer doesn't have enough memory to support the resources needed to open a page or file, which can lead to a variety of problems.

The solution is to close other unnecessary web pages and software to free up memory, or increase the physical memory of the computer. 4.Viral or Trojan infections.

Some viruses or Trojans can modify system and browser settings, causing various unusual problems. Antivirus software needs to be installed for a full scan and antivirus repair. 5.

Third-party plug-ins or extensions conflict. Some third-party browser plug-ins or extensions lack compatibility testing and can conflict with systems or other components after installation, causing various problems. Third-party plug-ins and extensions can be temporarily disabled or uninstalled.

Dress up 6Network connectivity issues. If there is a configuration problem after the computer is connected to the Internet, it may be caused by a network abnormality.

Restarting the router or adjusting the network banquet options can be fixed. 7.Hardware failure.

Partial failures of the computer's internal hardware, such as the CPU, motherboard, and hard disk, can also lead to problems with the configuration of pages or files. A technician is required to inspect, repair, or replace faulty hardware.

Due to the page file configuration problem on the startup computer, the temporary page file is stuck: 1. Right-click "Computer" and click "Properties"; 2. Click "Advanced System Settings" - Advanced - Performance "Settings" - Advanced; 3. Click "Change" in the virtual memory column; 4. Uncheck the box of "Automatically manage the paging file size of all drives"; 5. Select the D drive, click on the custom size, and set the initial size (generally smaller, which can be multiple the memory) and the maximum value (which can be slightly larger in case of emergency, which can be set to 3 times the memory). Then click "Settings", if prompted, click "OK", and continue to click "OK"; 6. Prompt to restart, click "OK", and restart the computer.

Due to a page file configuration issue on the startup computer, the temporary page file is stuck.

1. Right-click "Computer" and click "Properties"; 2. Click "Advanced System Settings" - Advanced - Performance "Settings" - Advanced; 3. Click "Change" in the virtual memory column; 4. Uncheck the box of "Automatically manage the paging file size of all drives"; 5. Select the D drive, click on the custom size, and set the initial size (generally smaller, which can be multiple the memory) and the maximum value (which can be slightly larger in case of emergency, which can be set to 3 times the memory). Then click "Settings", if prompted, click "OK", and continue to click "OK"; 6. Prompt to restart, click "OK", and restart the computer.

After the above method operation, I believe it can help you solve the problem of page file configuration when starting the computer, if you also encounter it, you can learn the above method to solve it.

Can't restart. Hello dear! Reboot as described above.

He only prompted that the restart point was gone after it was determined.

Didn't restart the desktop, nothing.

Hello dear! Wait, the computer is stuck, and the time is longer.

What should I do if I encounter "Page file configuration issues due to startup of the computer"?

What should I do if I encounter "Page file configuration issues due to startup of the computer"? Hello dear, In the process of using the computer, the C drive is getting smaller and smaller, and the running programs take up a lot of memory, resulting in memory exhaustion. When we turn on the computer, the computer appears with a dialog box that says "Due to a page file configuration issue when starting the computer.

That's where we need to modify the virtual memory. Virtual memory is the use of a portion of hard disk space as memory. When memory runs out, the computer uses it as memory.

When we clean up computer junk or clean up disk fragments, it is a palliative rather than a cure. One of the following methods can be used: 1. Ensure that there is enough space for C, D, E, F disks.

Right-click on Computer - Properties - Advanced System Settings - Advanced - Settings - Advanced - Change. 4. Change the virtual memory to drive D. First, select the D drive, click the size of the system management, and click Settings - OK.

At this time, the C drive is empty, and the page configuration problem that occurs when the computer is started can be solved. I hope it can help you, if my answer is helpful to you, please give a like (rate in the lower left corner), look forward to your like, your efforts are very important to me, and your support is also the driving force for my progress. Finally, I wish you good health and a good mood!