What happens when my computer starts. This is the case with the computer, how to turn it on

Please carefully translate the English before pressing the F1 prompt at that time.

I came across a keyboard that did not match the keyboard model in the BIOS after replacement, and there was a prompt that Keyborad failed.

Also, after you change the motherboard battery, you should reset some items in the BIOS settings. What exactly is different for each BIOS, the main hint is in the words before prompting you to press F1.

BIOS Setup Issue: Boot press del to enter BIOS

Go to Standard CMOS Features and find Drive A, if your machine doesn't have a soft area set to none, if there is a set to none, you can do it.

Here are a few things you can try:

1. After booting up, press del to enter the BIOS, and set the BIOS value to the default;

2. If there is a problem with the system, it is better to reinstall it.

And the first method is not a one-size-fits-all approach, so it's best to refer to the second.

After the replacement, you need to go into the BIOS to set it up. Then save to exit.

It's a good idea to send the stop screen on your screen in English. It's time for you to tell you what's wrong.

It seems to be going to the big dos to get ha.

I don't remember exactly how to pull it.

Please be a master.

What is written above. Write it down and post it here so we can help you!!

When a computer boots up, a splash screen, also known as a BIOS, usually appears, which lists all the hardware configuration information of the current computer and performs a self-diagnosis to make sure that there are no problems with the computer. After the BIOS, the computer will boot up the operating system, usually Windows or Mac OS. Once the operating system boots up successfully, users can use the computer for various tasks such as browsing the web, documents, ****, etc.

If you're having trouble booting up your computer, it could be due to a hardware or software malfunction. Hardware failures can include damage to the hard drive, memory failure, etc. Software issues can include crashes of the operating system, virus infections, etc.

Checking that your computer is plugged in with all the necessary power and data cables is also something to consider.

To ensure that the computer boots up smoothly, there are some simple maintenance measures that we can do. First and foremost, it is very important to keep the operating system and software up-to-date, as many updates include security patches and stability improvements. Secondly, regularly cleaning your computer of junk files and unnecessary programs can help free up disk space and improve your computer's performance.

At the same time, a reliable anti-software and firewall can help protect computers from malware and cyber attacks.

Finally, if your computer is having frequent boot issues, consider upgrading or replacing some of your hardware, such as memory sticks or hard drives. If these solutions don't resolve the issue, consider seeking technical support or consulting a computer specialist for more in-depth assistance.

Simply put, PC boot refers to the act of a computer completing a self-diagnosis and booting up the operating system. If the computer doesn't boot, the first thing you need to do is check for possible hard guesses or software failures and consider maintenance measures. If the problem is not resolved, consider upgrading or replacing some of the hardware and try to seek professional help.

The computer won't turn on the solution:

Check whether the monitor and the main unit cable and connector are connected;

2.If the external monitor sees that the system has started normally, then you can check whether the switch button above the keyboard for turning off the power supply when the display is closed is normal;

3.If the external monitor and the pop-up display power-off switch are all right, the display cannot be displayed, then it may be a system problem;

4.If you are unconditionally connected to an external monitor, please reboot it and pay attention to whether the display screen is black at the beginning of the system boot in the DOS boot state. If the screen is also black when the DOS boots, and there is no normal self-test sound, it is mostly a system failure;

The startup disk may be set up incorrectly. Solution: Modify the hard disk mode. Boot up, press F2, F10, F12 Delete (depending on the motherboard) to enter the BIOS, and set the first boot disk as a CD, floppy disk or U disk to a hard disk (harddisk);

6.HDD MBR error can be reset with DiskGenius;

7.Check whether the optical drive, USB flash drive, floppy disk, etc. are inserted, if so, you can take them out and try to turn them on;

8.Enter the BIOS, modify the hard disk mode, set different modes and try to restart to see if it can boot;

9.Press F8 to enter the mode, and select the latest correct configuration or normal startup.

10.If none of the above methods can be solved. For desktop computers, please disassemble the case, unplug the hard disk cable and reconnect it, and then see if it can be started; During the boot process, listen to and touch the hard disk with your hands to see if the rotation is normal;

11.The one-size-fits-all approach: reinstall the system.

Nowadays, many people like to assemble their own computers, but many people are like this house, and they don't know much about computer hardware, which leads to many times when the computer can't be lit normally after installing the computer. Below, I will share with you several solutions to the computer that cannot be turned on.

1. After the computer is turned on, the fan turns and stops.

I believe that many people have encountered that when the computer is installed and lit, there will be a fan turning and stopping, as if it can't be brought up, this situation is mostly because the memory is incompatible or the memory module is broken, or the memory slot is broken, anyway, there is a problem with the memory, you can try to change the slot, or replug and unplug, if not, deduct the motherboard battery, press and hold to turn on and restart, press and hold a few times, discharge the motherboard, and then install it back to try, usually there is no problem at this time, if...I mean, if it doesn't work......Change the motherboard, brother, most of the motherboard memory is damaged.

2. After the computer is turned on, the computer fan works normally, but the output device is not lit.

In this case, it's not that the computer is broken, most likely the graphics card is not plugged in or the motherboard power interface (including the fan power supply) is not plugged in well, and it can be solved by plugging and unplugging it again, if it can't be solved, please refer to the end of the first article.

3. The computer boot button does not respond.

Sometimes there will be no response when pressing the boot, at this time, try to touch the copper pillar of the boot interface with metal, if there is no response, most likely it is the South Bridge chip that has a problem, take it to repair the computer to repair it, if it is burned, then it can only be returned to the factory. If you touch the copper pillar to turn on, it means that your boot cable is not plugged in properly, or the switch is broken.

4. The computer can be turned on, but it cannot enter Windows.

In this case, the hard disk is generally not plugged in, and the hard disk data cable can be re-plugged and unplugged, if it doesn't work, use the U disk to start a hard disk boot boot, if it doesn't work, use the U disk to start and repair the C disk system file, or reinstall the system, usually as long as the computer can be lit up normally, whether you can go to Windows or not, the hardware will generally not have a problem, and the general reinstallation system can be solved.

This house will try to help you solve it.

365 days of non-stop updates.

Open all year round.

In the lower corner of the prompt, this is the BIOS settings page, boot here, there are many possibilities, the most common is that the motherboard parameters are not loaded normally, you can press F10 on the keyboard to save the current parameters and exit, the system will automatically restart.

Press F10, so that you can start directly, because the accidental button is not good, or you can directly power off and restart it normally.

This situation may be that the computer can't find the startup project, the general computer boot has to start from the floppy disk, start from the hard disk, from the U disk drive default should be from the hard disk, if the default line changes, she can not start.

If there is no problem to enter this interface by mistake, just press F10 to exit and restart directly, no need to care about how to operate.

This is just the advanced settings of the computer when you boot up, you can try to press the esc key to exit or restart the computer.

You can press Ctrl+Alt+Del to restart the computer, and then don't press any button to restart the computer.

You are entering the BIOS interface. If you've already set it up, just press F10 to exit. It must have been that you accidentally pressed the keys on your keyboard when you turned on your phone, which is why you are here. If it doesn't work, you can just reboot.

You accidentally pressed the shortcut key to enter the BIOS, you press ESC on the keyboard to exit, and then boot normally.

If it's a desktop computer, you can press the host to turn it off and turn it on directly, if it's a tablet, restart it directly, press the power button, or see if it's a problem with the screen display?

1. If you do not have a floppy drive but the floppy drive is enabled, you can disable the floppy drive.

Press del to enter the BIOS at boot, and select: Standard CMOS Features

drive a : Set to none

drive b : Set to none

Press F10 to save and press "Y" to enter.

In this case, the computer has entered the state of BIOS settings. ......You can restart the computer directly, and it will boot up smoothly.

In this case, you don't panic, you press f for a while, f for a while he is a save, after saving he will pop up a call for you to choose or close, you choose a crooked, it will restart.

Like this, there is a problem with the program.,You directly enter the program according to the amount.,Make a choice.,It's OK to boot.,That is, it's a kind of forced boot.。

This situation may be a problem in the computer, you can also go to the after-sales service to solve it, you can also ask customer service in your computer ** to see how to solve the birthday, you can take your computer directly to the place where the computer is repaired.

This kind of problem in the computer may be due to the reasons generated by the system, I think that if you re-do the system, you will completely eliminate these reasons on the computer, so that your computer will return to the original fast state.

This happens when the computer is turned on, mainly because the current version of the BIOS in the computer needs to be upgraded. So every time you boot up, you will automatically enter the BIOS

This is when booting the keyboard into BIOS mode. Keyboard control to the right, restart restart. Or restart the computer without pressing the keyboard to enter the system.

If this happens to the computer, it is generally a problem with the motherboard, you can replace the motherboard, and then turn it on.

Just press ESC directly, the motherboard interface, usually caused by the hard disk not booting normally.

This is to enter the BIOS settings, press ESC on the keyboard to exit to enter the boot interface.

Press F10 directly, select Save in the pop-up dialog box, you can exit, this interface is you enter the BIOS system interface, and you can exit directly.

You just display the BIOS screen, you can't see your computer from this, what's the problem? If you still can't get into your computer system, the best thing to do is to revert to the default settings.

If this page appears on the computer, you can directly press the restart button to try it, and then enter an F1 mode, and then see if you can enter the main page. If that doesn't work, look for a professional.

The hard disk is not loaded, so the computer automatically boots into the BIOS, please plug in the case and replug the hard disk cable.

Ask the after-sales customer service of this brand, or take it to a nearby computer store for repair.

This is the BIOS interface window of the computer, all in English, you must know how to set the selection of device boot items, open the device boot tab, and set the system disk priority boot, this window indicates that your computer system is damaged.

Recovery disc repair will do it:

1. Turn on the computer, keep pressing the del key or F2 key or F12 key to enter the CMOS setting.

2. Switch to Advanced BIOS and set First Boot Device to CDROM! Different machine settings are different, of course, some can be directly selected through the del key.

3. Insert the system disk recovery disc! Start your computer.

4. After the installation interface of the disc is displayed, click Repair Computer.

5. In the dialog box that comes out again, click Auto Repair.

6. After the repair is completed, take out the disc.

7. Restart the computer to see if the problem is solved.

Possible reasons: 1. There are incompatibilities between systems or programs, press f8 to move to the advanced option when booting up, and select "latest correct configuration" Enter to repair, and press f8 to enter the safe mode to restore the system or reinstall the system to argue.

2. The CPU or other hardware temperature is too high, and the memory and graphics card are incompatible or faulty.

3. If the hard disk has bad sectors, please use the system's built-in functions or software to repair the disk, or format the hard disk to repartition and reinstall the system.

4. Power failure and voltage instability can also cause automatic restart.

5. Incompatible drivers can also lead to restart.

6. Failure of motherboard parts.

7. Change the default automatic restart of the system: right-click on the settings in My Computer Properties Advanced Startup and Fault Recovery to remove the tick before "Auto Restart" in the system failure, and then press OK and apply to restart the computer.

8. If the above methods are ineffective and you can't find the problem, it is recommended to overhaul it.