How to calculate the size of the wallcovering? How to calculate the size of the wallcovering?

1.First of all, you have to calculate how many pieces of wallpaper can be cut per roll:

Algorithm: The length of the wallpaper (the height of the room + the distance between the flowers) = the number of widths that can be cut out of each roll For example, if you want to buy a meter wallpaper, the height of the room is meters, and the pattern cycle is 20 cm (this parameter is not available in most wallpaper pages).

10 ((here you have to choose to remove the decimal = 3).

Note: Generally, the floor height is between meters, and a roll of wallpaper can only be cut to 3 pieces. After cutting 3 pieces in a roll, the remaining short ones that are not long enough can be made up of short places above and below the window and above the door.

2.How many wallpapers do you need:

Algorithm: Room Perimeter Width of wallpaper = Number of frames required

For example, the perimeter of the room is 18 meters (after deducting the width of doors and windows).

18 (rounded up = 34 here).

3.Folded into rolls:

Algorithm: The number of wallpapers required The number of pieces that can be cut into each roll of wallpaper = the number of rolls For example: the above needs 34 pieces of wallpaper 3 = rolls (here you need to round up 12 rolls).

1. The length of the wall is multiplied by the height of the veneer, the area of the closed doors and windows, divided by the width of the wall cloth and wallpaper, plus 5% loss, which is equal to the length that you actually need to buy.

2. Simple calculation method: multiply the living area, which is equal to the required length.

Because it has a certain strength, beautiful appearance and good water resistance, it is widely used in the interior decoration of residences, offices, guesthouses, hotels, etc. The expression of wallpaper is very rich, in order to adapt to different spaces or places, different interests and hobbies and different levels, there are also many types of wallpaper to choose from.

The specification of the wall cloth is set at a fixed height, just measure the length of the wall, measure the perimeter of a house, and then increase each wall by 5-8 cm (because there is a certain cut when posting, and there are also some house walls that are not straight), note: there are doors and windows where there are also measurements (there will be some waste here, but the wall cloth cut out of the doors and windows can be used in other places, according to the site situation is reasonable and economical), the area is the perimeter of the room multiplied by the height of the wall ( If the actual circumference of the room is 12 meters, plus the increase of 4 on the four walls, multiplied by the fixed height of the wall covering, i.e. square meters).

The wall cloth is generally set at a fixed height to buy the width, and the width of the wall cloth is the height of the wall, so buy the wall cloth as long as the width of each wall can be, of course, in order to cut the edge neatly, you need to add a little width, just like making clothes, you need to reserve a sewing position.

How to calculate the area of the wall cloth charge: There are two ways to calculate the square of the wall cloth: the perimeter of the wall cloth is the perimeter = (length + width) x 2 + total loss = the height of the wall cloth x the number of meters required (i.e.:

1. The length of the wall is multiplied by the height of the veneer, the area of the closed doors and windows, divided by the width of the wall cloth and wallpaper, plus 5% loss, which is equal to the length that actually needs to be bought. 2. The simple calculation method includes: multiplying the living area, it is equal to the required length.

Finally, measure the length of the materials needed to dig the smile on the wall under the window, irregular corners, etc., and add the two lengths together to become the total length of the required wallpaper or wall cloth. Considering the parquet needs and possible wear and tear during construction, you can buy about 10 more than the actual amount when purchasing.

Summary. Hello, the size of the wall covering is calculated in square meters. The length is multiplied by the width.

Hello, the size of the wall covering is calculated in square meters. The length is multiplied by the width.

Wall covering is also called"wall coverings"。Laminating the fabric of the wall. Cotton cloth is used as the base cloth, and the base cloth is printed or embossed, and it is also woven with jacquard. Most of the patterns used are geometric drawings and floral patterns.

1. The length of the wall is multiplied by the height of the veneer, the area of the window that closes the door and the sliding window, divided by the width of the wall cloth and wallpaper, plus 5% loss, which is equal to the length that actually needs to be bought. 2. Simple calculation method: multiply the living area, which is equal to the required length.

Because of its strength, beautiful appearance and good water resistance, it is widely used in the interior decoration of residences, offices, guesthouses, hotels, etc. The expression of wallpaper is very rich, and it adapts to different spaces or places, different interests and hobbies and different levels for state pants, and there are many types of wallpaper to choose from.

Extended information: Calculation method of the average number of seamless wallcoverings: wallcoverings can be ordered by meters or squares, with one decimal place.

Calculate the square number of the wallcovering: use the length (for example) * the specification of the wallcovering. Equal to square meters (with one decimal place left in front of the front).