The cat uses a voltage regulator and then turns on the air conditioner, will it drop the line

Updated on technology 2024-02-09
9 answers
  1. Anonymous users2024-02-05

    No, but two more air conditioners need to be connected to the voltage regulator, and the voltage regulator power should be relatively large.

  2. Anonymous users2024-02-04

    Only 170v? Can other appliances still work? For example, air conditioning.

    It is recommended that you buy a better regulator.

    Just for cats:

    Whole Home Circuit:

    Portable three-phase power system:

    Choose according to the actual situation.

    If you don't plan to use a voltage regulator, look at it yourself, 170V is too low! What's going on in your house?

  3. Anonymous users2024-02-03

    The 170v cat is enough, besides, the cat is disconnected and restarted, what about your computer, the computer will not restart. If the computer also reboots, it means that the voltage is low. Buying a high-power regulator will solve the problem.

    If the computer doesn't restart, it's a broadband thing. You go to customer service! It has nothing to do with voltage.

    When the voltage is low, the computer will restart first. Failure has nothing to do with voltage. Think about something else. Good luck.

  4. Anonymous users2024-02-02

    No, it won't. Under normal circumstances, the thermostat can be guaranteed.

  5. Anonymous users2024-02-01

    Just buy a larger regulator and basically it won't drop.

  6. Anonymous users2024-01-31

    It may be that the electrical appliances of the surrounding users affect you, the voltage fluctuation is relatively large, and the cat itself is more sensitive to voltage, and the power supply quality of the cat is generally not very good. In this case, there are 2 solutions 1: contact the local power supply department and check the line (the estimated period is relatively long, and most of the problems cannot be solved).

    2: The only feasible solution, relatively cheap, buy a UPS 500va first horse, about 220 yuan, and then you look at how much the power adapter your cat is connected to, according to this value to buy a *** power adapter (obviously feel heavier in your hand, about 30 yuan) together down 220 + 30 = 250 yuan. This will solve the problem of your computer restarting and cat restarting.

    If the computer is okay like yours, you just need to change the cat adapter.

  7. Anonymous users2024-01-30

    That may be the line is interfering, and mine is too, broken every 15 minutes.

  8. Anonymous users2024-01-29

    Check the ** cable, especially the connector and network cable. If it doesn't work, just complain.

  9. Anonymous users2024-01-28

    Generally, the voltage regulators on the market are contact switching transformer taps, and the voltage adjustment is not smooth, so the voltage regulators are relatively cheaper; The voltage regulator without rock calendar with contact switching** is relatively high; It is not easy for the average user to accept. It is recommended that the AC and DC conversion part of your cat's power supply should be used as a switching power supply, and the voltage stabilization range of the switching power supply is wide, which is acceptable to general users; Smaller in size and weight. Great for users.

    Questions about cats:

    In general, it is mostly caused by the unstable temperature characteristics, and in the hot summer, the temperature is very high, don't you feel hot? The equipment doesn't work when it feels hot; You may wish to refer to the following methods and measures that you feel are acceptable to reduce the ambient temperature of cats or routers and network switches and computer equipment.

    A: For users who often surf the Internet, after the power is cut off for up to half a year, open the shell of the device and clean up the dust inside the computer.

    b: Place the cat in a safer place for people, open the lid of the cat box, and use air convection to strengthen the contact surface with the air for natural heat dissipation;

    c: Install a micro fan for the cat to increase the convection of air and force heat dissipation;

    D: If you are doing IT, I suggest you: after disconnecting the power supply, add a heat sink to the cat's heating parts.

    e: After the cat is disconnected from the power supply, use a 3mm drill bit to drill many holes up and down the cat to strengthen the air convection flow and improve the heat dissipation conditions;

    F: Let the adsl cat sync first: power off the cat and restart it.

    H: To ventilate and dry the cat, it is best to make a bracket to support the cat for natural heat dissipation;

    As long as you do a good job in the above aspects, your failures will be eliminated;

    Thank you for my answer!

    Thank you: friend!

Related questions
6 answers2024-02-09

The switching LM7805 is a high-efficiency switching regulator that is an ideal replacement for the 78xx series of three-terminal linear regulators with high efficiency, low losses, low heat generation, and no need for an external heat sink for use. >>>More

18 answers2024-02-09

First of all, determine how low the voltage of your home is, first, the voltage is very low but very stable, and second, the voltage is high and low and unstable. >>>More

31 answers2024-02-09

It should be that the internal wiring is in poor contact.

15 answers2024-02-09

The router, which comes with its own network management and supports a variety of protocols, for example, if you fill in the dialing password and other information, he can automatically dial the number, if it is 4 ports. >>>More

9 answers2024-02-09

Hello! Hopefully, the following will be helpful to you.

First of all, change the IP of the router to be different from the cat, such as: Then connect the LAN port of the cat to the WAN port of the wireless router, refer to the label address on the back of the router or the instructions for use, enter the router setting interface, start from the setup wizard, set up the router according to the prompts, select PPPOE dial-up for the connection mode, fill in the username and password, set the wireless network password (letter + number combination is recommended) to save and restart. >>>More