How to connect the telecom cat to the wireless router 10

Hello! Hopefully, the following will be helpful to you.

First of all, change the IP of the router to be different from the cat, such as: Then connect the LAN port of the cat to the WAN port of the wireless router, refer to the label address on the back of the router or the instructions for use, enter the router setting interface, start from the setup wizard, set up the router according to the prompts, select PPPOE dial-up for the connection mode, fill in the username and password, set the wireless network password (letter + number combination is recommended) to save and restart.

Hello! Hopefully, the following will be helpful to you.

Connect the LAN port of the cat to the WAN port of the wireless router, refer to the label address on the back of the router or the instructions for use, enter the router setting interface, start from the setup wizard, set up the router according to the prompts, select PPPoe dial-up for the connection mode, fill in the user name and password, set the wireless network password (recommended letter + number combination) to save and restart.

Buy a wireless router to connect to the back of the cat, set it up, and call ** to transfer manual services to telecommunications, and let him refresh the cat.

You're watching Internet TV. Don't have a set-top box. Telecom seems to be delivering.

After you connect the network cable to your modem, then pull out a cable from the modem to connect it to the router, and then pull the cable from the road to the set-top box and the computer to surf the Internet separately. If it's just device 1 and device 2, there's no way.

ITV's account and password are not the same as the account and password you use to surf the Internet,1:There is a cat in front,Connected to the wireless router behind,The account and password of broadband are automatically pulled out by the router,ITV and the computer can be directly connected to the LAN end of the router,But after a period of time,The TV may not have a picture,According to Telecom,ITV and broadband are to be opened separately and take two ** lines in。

2: Imagine that the network cable at the input and outlet end of the cat directly enters the switch, and then the switch comes out with two network cables, one into the wireless router to pull out the broadband account, and one into the ITV set-top box to pull the ITV account, so that they can not interfere with each other, and can be used.

Hello: You first connect the device as shown below.

Enter the address you see on the router in your browser, which is usually.

Then enter,Enter the corresponding account and password,Generally, the newly bought admin is indeed the operation interface,You will see a setup wizard on the left,Enter the setup wizard interface。

Click Next, enter the Internet access method settings, we can see that there are three Internet access options, if your home is dial-up, then use PPPOE. Dynamic IP can be used by plugging the computer directly into the network, and there is a DHCP server on the upper layer. The static IP is generally a private line or something, or it may be a cell bandwidth, etc., and the upper layer does not have a DHCP server, or wants to fix the IP.

Hehe, you just need to connect this cable to the wireless router.

1.The router is a device that sets up a LAN to achieve network sharing, and the general connection and setting methods are as follows: connect the network cable out of the broadband cat to the WAN port of the router, connect each computer to the LAN port of the router, and the IP address of the computer network card is set to be automatically obtained, enter it in the address bar of the computer browser, and specifically check the network parameters obtained by your computer network card, and log in through the IP address of the gateway) Log in to the router, and the general user name and password are admin, Select the WAN port settings, and set your broadband account and password to the PPPoE mode.

2.If the laptop uses wireless Internet access, the operation is as follows: right-click the online neighbor - properties - right-click the wireless network connection - view the available wireless network, click your wireless network name in the searched wireless network - connection, and enter your wireless network key for verification, after passing the verification, you can connect to the wireless router to surf the Internet normally; If it is a mobile phone or tablet wifi Internet access principle is the same as above, it is also to search for wireless signals and enter the wireless network key connection can be used.

The telecom cat has a router and a cat in one, and that's what I use at home. There can be hundreds. You also save money on buying a router. Pay attention to thunder, touch it, it's broken.

= =！This doesn't seem to be possible.,The route seems to be for the kind of light brazing that doesn't need cats.。。