What is the appropriate length of the bumper strip for the baby?

Method steps.

1 5 step by step reading.

First of all, let's take an inventory of the tools we need, bumper strips, double-sided tape and scissors. It is recommended that you measure the length of the table at home before buying, so as not to cause the bumper strip to be too long or too short. There is also a special corner protector of the anti-collision strip, which is also very useful.

First of all, let's determine where we should stick, we should determine according to the child's current height, for example, the edge of our dining table is not bumped by the child, but there is a weighing place under the dining table that will touch the child's head, so this kind of place must be pasted, look at the specific picture.

Then we need to stick the anti-collision strip as long as the place where the anti-collision strip is needed, and then cut it out, and paste double-sided tape on the inside, and the double-sided tape should be pasted evenly.

See 1 image remaining.

The kind of anti-collision strip specially used to stick on the impact angle is also very practical, we can cut out a small piece of anti-collision sticker on the corner of the table or use a special anti-collision table corner sticker, when pasting everything to the child's actual height to handle.

When pasting the special anti-collision sticker at the corner of the table, the corner of the table is higher than the child's head, I recommend sticking it upside down, although the aesthetics will decline, but in order to keep the baby from being knocked down, it is still practical in the first place.

It's hard to say, you need to paste according to what you paste, the anti-collision strip is long and short, basically you need to cut it to use, and you don't use much, we haven't used up a single one, there are still a lot left, you still buy according to the length of the thing you paste, and it's useless to have more.

It depends on how many places in your home need to use the anti-collision strip to assist, the baby at home since he can walk, the corner of the table must be protected to prevent the baby from walking and bumping, select the hugging bear anti-collision strip, this can be freely cut will not be wasted, but also more resistant to pulling and flexible, usually stained with oil-stained sauce to choose waterproof and oil-resistant type, so that it will be clean, not only durable but also recycled, this is more suitable for the baby bear at home.

According to the situation of the furniture at home, buy more furniture with more edges and corners, measure it yourself first, and then a little more after you are sure.

Question 1: Is it useful for children to use safety bumpers? Of course it's useful, it seems that you didn't do a good job as a mother, and when the baby will crawl and walk, it is especially easy to fall, especially the edge of the table must not be angular, and it is easy to bump into the head.

My baby aunt bought a bunch of twotigers anti-collision angles and anti-collision strips when she was just able to climb in the treasure destruction type, and now the baby can run, and the anti-collision angles at home are still sticky and tight.

Question 2: Where is the baby anti-collision strip used 1. The anti-collision angle can be used for anti-collision protection of table corners, glass corner protection, and door corner anti-collision protection, which can be pasted on tables, beds, and electricity.

2. The anti-collision angle is suitable for all right-angle desktops, homes, wall corners and other places in the home, and its shape is right-angled and flat.

Question 3: How to remove the child bumper strip on the cabinet and wipe it off with alcohol!

Question 4: How to remove the child bumper strip on the cabinet attached to the wall? After sticking for a long time, I can't get rid of the rent, and there are traces of glue when the fiber is torn and bent, what should I do? The water can be erased. But the water is flammable, so stay away from the fire.

Question 5: What brand of anti-collision strip for babies is good to use.

1.Clean the veneer to be protected, remove the grease and dust from it, and the Estee Infant Bumper Strip.

2.The veneer is dried and then pasted.

3.After measuring the length of use, cut the corresponding length separately.

4.Peel off the adhesive backing and attach the protective strip to the veneer.

5.Press the entire bumper firmly together.

It would be better to choose the foam quality of the bumper strip, because I also chose this material at home, and I personally think it is better.

First, if there is a baby at home, when choosing a bumper strip, I must choose materials that pass the quality and environmental protection, because the baby's resistance is relatively low, if you choose some materials that are not of good quality, then it will cause some damage to the baby's body, and it is best to use some better brands of manufacturers to produce anti-collision strips.

Second, the main materials for the production of anti-collision strips on the market are silicone, rubber, TPV (thermoplastic vulcanized rubber), foaming materials (such as soft polyvinyl chloride), etc., and the finished products will be different. Among them, silicone and rubber are softer and ideal filling materials. In addition, it also has the characteristics of heat resistance, cold resistance, mildew resistance, moisture resistance, weather resistance, and no chemical reaction with other substances.

3. If you choose silicone material, please make sure that the product is made of new materials, not old materials that have not been reworked because of old materials. The foaming material has the characteristics of waterproof, flame retardant, acid and alkali resistance, mite resistance, light weight, heat preservation, sound insulation, shock absorption and so on. The color can remain unchanged for a long time and is not easy to age.

The surface is smooth, easy to clean, and can be used as a collision angle. Effectively reduce the impact strength and play a role in protecting the baby.

Fourth, parents should pay attention to the softness of the foaming material when choosing the foam material, because the general rigid foam board is widely used in the market, so when purchasing, it is necessary to pinch with one hand and one hand. The anti-collision strip is generally a straight bar, and the anti-collision angle is generally a right angle and a spherical surface. The right-angle product is in a three-dimensional packaging state, which can effectively fit the edges and corners of the furniture.

Generally speaking, if there are small babies at home, the bumper strips they use are sponge or environmentally friendly silicone.

If you have a baby at home, it is best to choose the kind of light and soft bumper strip, which will not hurt the baby's head.

It is definitely necessary to choose environmentally friendly materials, because environmentally friendly materials are the best for children, otherwise they are not good for the body.

If you have a baby at home, you will generally choose the kind of soft plastic or silicone bumper.

If you have a baby at home, it is best to choose some environmentally friendly materials, which can help the baby better contribute to the baby's health.

First of all, the most important thing is to pass the quality test, environmentally friendly materials, personally recommend silicone and rubber materials, relatively soft, and will not be deformed due to temperature.

After everyone has a baby at home, they will pay special attention to safety, because the baby is the core of the whole family, the baby is particularly small, he does not have any self-protection ability, if the baby has any accidents, it is likely to cause harm to the baby, secondly, he is too small, there is no way to identify the danger, sometimes ordinary people are easy to identify the danger for them can not be distinguished, for exampleIn the corners of the house, many babies have been injured in the corners of the house, so what kind of anti-collision strips are installed at home to fully protect the baby?

After many families have a baby, the family is extra important, and no one wants to protect the injured at home. The first thing to pay attention to is definitely the various corners in the house, because sometimes the baby hits the corner when crawling or running, and it is very easy to get injured. The corners are sharper.

If there is an accident can be very dangerous, so many parents install the corner of the bumper, for the usual home installation bumper strip has a lot of choices, but for the baby, the bumper must be chosen correctly. First of all, the installation height of the bumper strip should not be too high, the baby is relatively small, if the installation is too high. Not only will you not protect the bumps of his bumper, but you will even hurt him.

Secondly, for some tables, the anti-collision strip of the coffee table must be soft, and some sponge anti-collision strips are installed on the table and the corner of the coffee table, which is very effective in protecting the safety of the babyThese soft ones allow the baby not to be injured when they collide, and they can be cushioned. As for the anti-collision strip in other places, you can use some plastic transparent anti-collision strips, or anti-collision strips that are more similar to the decoration style of your own home, because the anti-collision strip is also a decoration, if it is too different from the decoration style of your own home, it will give people an abrupt feeling.

The safety of the baby is not only about the anti-collision strip, but also some others, such as a bed with a railing, you must pay attention when choosing a bed with a railing, and choose a regular manufacturer, don't choose cheap three-no products, sometimes, substandard products not only will not protect the child, but even bring great danger to the child.

The choice of material for the bumper must be safe and environmentally friendly, then the viscosity should be good, and then the most important thing is to be soft.

For the sake of convenience, many people only wrap the anti-collision strip in a slightly sharp corner such as the corner of the table, but in fact, the long, completely wrapping the edge of the furniture anti-collision strip is safer.

Generally, it is better to install PVC soft anti-collision strips, because this material is thicker and more flexible, which can effectively protect the baby from bumps when playing.

Try to install a relatively soft bumper strip, so that even if the baby hits it, it will not be hurt too much.

Most crash strips are made of resilient PVC or rubber, which is safe and aesthetically pleasing, protecting your baby and your family from collisions without hindering the overall shape of the furniture. This product is suitable for table corners, bed corners, bookcases, staircase corners and other locations in general families.

When selecting the bumper strip, fix the protrusion of the table corner with the matching double-sided adhesive on the corner of the table and all the corners that need to be protected. Suitable for large and small size right-angle bits.

The anti-collision strip of rubber and plastic material is brightly colored, and it is relatively low, and it is more convenient to paste. Generally, the aging life of high-quality anti-collision strips is more than 10 years, which is a relatively ideal protective product at present.

Before pasting, the rubber and plastic anti-collision strip should be in a temperature chamber of about 50 degrees, and then heated for 3-5 hours to make it soft, and then evenly brushed for bonding.

If the bumper is cracked, aged or falls off, a new bumper should be purchased and replaced in time.

Because young babies are curious about new things, they may play with the newly installed protective equipment as a toy or even damage it, resulting in safety hazards. It is recommended that within 6 months after the baby is born, install the bumper strip as soon as possible in the place where there are hidden dangers in the home, and the baby will not be curious about the newly installed bumper strip after seeing it, and use it to play.

Infant anti-collision strips are also known as protective strips, protective corners, etc. It is mainly used in school kindergartens, family corners, water chestnuts for various furniture facilities, etc., and its main material is (environmentally friendly soft PVC salted special material).

In the process of growing up the baby, parents pay special attention to the safety of the baby, in order to avoid the baby in the daily play bumps, so it is essential to paste the anti-collision angle around the furniture, so how to paste the children's anti-collision strip? Wipe the pasted place clean before use, do not pull back and forth after pasting, it is best to stick it for 24 hours, so that the adhesion is better.

If the surface is dirty, you can squeeze some toothpaste or wet rag to wipe it off. In addition, I will also introduce you to the self-made method of baby anti-collision angle, let's learn about it together. 1. How to paste children's anti-collision strips.

1. Make sure the inside of the protective strip and the corner of the table are dry before use.

2. Measure the length of use, and then cut them separately.

3. Attach the double-sided tape on both sides of the inner edge of the protective strip.

4. Peel off one side of the adhesive first, and stick the protective strip on the upper side of the desktop.

5. Then tear off the other side and stick it on the bottom of the table to press the entire protective strip firmly.

2. Precautions for the use of children's anti-collision strips.

1. Wipe the pasted place clean before use.

2. Please do not pull back and forth after pasting, it is best to paste and fix for 24 hours, so that the adhesion is better.

3. If the surface is dirty, you can squeeze some toothpaste or wet rag to wipe it off.

4. If the temperature is relatively low in winter, in order to ensure the viscosity strength of the adhesive, heat it with a hair dryer before use, and the adhesion will be better.

Third, the baby's anti-collision angle self-made method.

Sometimes parents worry about whether the products on the market are safe enough to effectively reduce the severity of injuries in the event of a collision. Therefore, the ruler can also make full use of the materials around him, such as sponge pads, etc. Here are some ways to use household idle materials to make your own anti-collision angles.

1. Beverage bottle caps.

Materials: bottle cap, double-sided tape, scissors.

Method: Prepare a large number of bottle caps, trim them along the edge of the bottle caps, do not cut the surface of the bottle caps when pruning, about half of them can be cut. After trimming, just stick them tightly to the sharp corners with adhesive tape.

2. Floor mats. Materials: floor mat, all-purpose glue, scissors.

Method: Measure the width of the sharp corners that the defense file is about to wrap, cut the floor mat into strips of equal width, and then glue it to the sharp corners, and then you can also trim and beautify it after pasting.

3. A pearl cotton board.

Materials: EPE board, scissors, double-sided tape.