Why does the computer crash for no reason, and why does the computer crash for no reason!

Hello! First of all, the following answers are not network replication, but are the essence of my practice and communication!

The causes of crashes tend to focus on incompatible hardware and drivers, problematic software, viruses, etc. (The above ** is usually caused by a faulty driver or system service.) Suggestion:

Please troubleshoot the resolution as follows:

1. Feel the temperature of the CPU. Whether it is too high. Look at heat dissipation.

2. Whether the hard disk connection is loose; After there is no abnormality, check the hard disk for error;

3. If there is any virus in the system, it is recommended to scan and disinfect the virus in safe mode;

4. Try to restore the BIOS to its factory state;

5. Is the driver of the hardware installed successfully after installing the system?

6. It is best to reinstall the operating system first;

7. If there is still a problem after reinstalling the system, it is very likely that the hardware is incompatible;

8. Consult with the merchant or friends who are familiar with the computer, maybe they will help;

9. Good luck!

Hope to help you.

Maybe your computer is too bad to start certain programs, or your computer has been attacked by a virus, please check for viruses or reinstall the system.

It may be that you have made some irregular settings on the computer, which causes the system to be unstable.

Hello. Steps to solve the phenomenon of crash or power failure when the machine is turned on.

First, the computer is too dusty, resulting in too high computer heating, and the phenomenon of crashing or power-off (it is recommended to clean up the dust) Second, the computer is short-circuited due to the power supply of the computer host (it is recommended to change the host power supply) Third, the motherboard chip is short-circuited and broken (maintenance).

Fourth, memory chip problems lead to stuck, slow, blue screen, and stuck. (Maintenance) Fifth, the graphics card is too high to cause the computer to crash, black screen and other phenomena (maintenance) In fact, problems such as crashes and power outages basically do not need to be asked, basically have to be taken to the computer city for maintenance, which are basically problems caused by hardware.

The above are my replies and I refuse to copy Thank you!

This question is generally made up of two questions! System and hardware issues! You try to reinstall the system first! Then turn on the host to see if the memory is loose or too dusty! It's good to fix it.

I've encountered a lot of this situation.,You must be two 1G memory made up of 2G,This is obviously memory incompatibility,Most people think that the larger the memory,The faster the computer will run,That's right,But a few memories put together,Make the memory bigger,That's a negative factor!

It is recommended to unplug a memory and use only one memory, or directly buy a 2G memory, and resolutely use only one memory!

Another situation is the problem of memory module contact, if you are a 2G memory, then directly unplug the memory, use an eraser to wipe the metal bar to bright white, clean the memory slot with a clean oil brush, and then reinstall it, the problem is solved.

Good luck!

Cause of the failure system First, try all of the following solutions.

The first type of system problem is to go back to the original or redo the system with one click.

The second type of software problem is to reinstall the software under it.

The third software virus residual file cleans up the memory.

Fourth, the software is incompatible with the software.

Fifth, the cache settings are not reasonable, and the cache is reset.

Sixth, the system is short of resources, and the memory is deleted and cleaned up.

The seventh type of virus, Trojan horse detection and killing virus.

Eighth, the hardware is overheating, the CPU is too hot, and the heatsink is too dusty.

The ninth hard drive problem is to clean up the disk. Defragment the disk.

The tenth type of hardware quality hardware should be jumped.

The eleventh type of hardware overclocking is to de-energize the battery.

The twelfth type is that the hardware environment is incompatible and re-replaced.

Only lift the arch solution. No explanation is given.

1: To boot the computer, restore the BIOS to its factory state. (Battery de-energized) is more critical and must be done.

2: You copy the following command or in. Command Prompt Input:

regsvr32 /s

regsvr32 /s

regsvr32 /s

regsvr32 /s

regsvr32 /s

regsvr32 /s

regsvr32 /s

regsvr32 /s

regsvr32 /s

regsvr32 /s

regsvr32 /s

regsvr32 /s

regsvr32 /s

regsvr32 /s

regsvr32 /s

regsvr32 /s

regsvr32 /s

regsvr32 /s

regsvr32 /s

regsvr32 /s

regsvr32 /s

regsvr32 /s

3: Restart your computer. Do a comprehensive antivirus.

Then do the following four points faster on the computer.

The first is to close all startup items. (msconfig) in Run (tick) ctfmon

and anti-virus software.

The second is to empty the ** station. The system needs to clear IE temporary files and records. Delete your own use.

Patch files. Third, set up a firewall. Right-click on properties on my computer. Point System Restore. (tick).

Fourth, turn off System Restore on all drives. Turn off automatic updates. Open the Advanced System Properties dialog box, click Settings in the Startup and Recovery area on the Advanced tab of the System Properties dialog box, and uncheck Auto Restart in the Startup and Recovery dialog box.

In the Advanced tab, click the dot Error Reporting and the dot Disable Error Reporting

First see if the ** cable is not plugged in, then check if it is a system problem, and finally determine whether it is hardware.

Do you have a graphics card? Is the graphics card onboard or discrete? The sound that appears is the sound of one of the two sounds, the graphics card and the memory, unplug it, plug it back in, and try it.

It should be a hardware problem, the memory motherboard is possible, and the after-sales warranty is returned.

Take the warranty of the computer you just bought Ah, your motherboard may be burned.

It's just speculation.

When did you get stuck, can you tell me about it?

1. The antivirus software is installed more, and all the monitoring is turned on, less monitoring is turned on or not monitored, and the virus is often checked and killed.

2. If the software or driver is not compatible with the system, reinstall or upgrade the macro training driver.

4. Memory, graphics card, and voltage instability can also cause crashes (if the memory is too small, add a memory module).

5. The temperature of the common CPU or greeting sock graphics card and other hardware is too high, which is most likely to cause card and crash.

6. If the hard disk has bad sectors, use software to repair the bad sectors of the hard disk, format the hard disk, repartition and reinstall the hard disk, and replace the hard disk.

7. Upgrading the hardware causes an incompatible crash.

8. There are too many garbage documents, too many disk fragments, etc.

9. If it always doesn't work, it is recommended to overhaul it.

The computer should not operate at full capacity, that is, when playing games, watching **, and watching web pages, it is most likely to crash and blue screen while doing other operations, so don't operate other things when playing games, watching**, and watching web pages.

If your memory is small, it is recommended to add a memory module to test whether the temperature of your CPU and other hardware is high. The other is whether there is a problem with the hard disk (this is just a general statement, if there is a problem, please ask me, I am the right symptom).

It should be that Hongwei inadvertently searched the mountain for the Trojan horse.

Then clean up the plug-in and kill it thoroughly.

See if you can solve the landlord's problem.

Clean up the plugins, the cache is here, and the landlord will understand it when you look at it.

Blue Frequency has a variety of reasons.

1: The memory module is faulty.

2: The model of the memory module does not match the model supported by your motherboard.

3: If the temperature of the graphics card is too high, there will be blue frequency.

4: The system itself is a problem, and the computer should also have blue frequency.

This ** seems to be widely used, update failures, blue screens, unknown reboots are all this, maybe only specific records can explain it.

windodw7 problem feedback doesn't seem to have much effect, in addition to recommending driver manufacturers** can not solve the actual problems such as crashes, file corruption, etc., it is recommended that you can ignore it, as long as you make a backup, no one knows when the system will suddenly fail to start.

1. Check whether the memory is plugged in tightly, and whether the quality is problematic or incompatible.

2. Change and upgrade the drivers of the graphics card, sound card, and network card.

3. Please install the system patch.

If that still doesn't work, upgrade the driver or upgrade the BIOS

Software first, then hardware, application first, then system, from software, driver, system, memory, graphics card, etc.