Is there a charge for Call Waiting ?

Call waiting. Call waiting is when a mobile** user is on a call and another call comes in from you. At this point, the party that initiated the new call is placed on hold and then the new call is added after the original call ends.

A digital mobile** call waiting service is a service in which a user can make or receive a third party** during a call and can switch freely between the two calls. It has the advantages of convenience, fastness, accuracy and timeliness.

If you are a China Mobile user, you can use the service without applying.

Tariff standard. There is no monthly usage fee for the Call Waiting Service feature.

The call fee caused by the user's use of the call waiting service is calculated according to the user's normal call, and the call fee is also charged for holding the state.

Activate the call waiting feature.

Users need to activate the service in advance before using it, and the specific operation can be operated through the mobile phone menu prompts (different mobile phone operation methods are different), and it is also very convenient for you to operate by entering a unified ** on your mobile phone. **The specific operation method is:

Start Call Waiting Check Current Status Cancel Call Waiting.

Encoding *43

Use the call waiting feature.

1.When you're on a call with A, and another B** calls, you'll hear "beep, beep." You can switch between two calls by pressing the button on your mobile phone.

2.When you are on a call with A, you can dial ** again and switch freely between the two calls of AB by pressing the button on your mobile phone.

If you are a China Netcom, China Telecom, China Railcom fixed** or PHS user, you can call your local telecom customer service center to apply for this service.

Fixed**Operation method: Activate *58 ; Cancel; View Status * ; Two beeps are considered success. The busy signal is a failure.

When there is a **dial-in during the call, the user gently taps the **fork spring or presses the R key on **, and after hearing the dial tone, press 1 to end the current call and answer the third party; Press the 2 button to keep the current answering third party, and you can freely convert it according to actual needs; Press the 0 key to refuse to answer the third party.

PHS needs to refer to the manual due to the different models involved, but the basic principle is the same.

Fixed** and PHS use the same tariff standard for three-way calls as mobile**.

There is no charge, but it is not easy to use. When you pick up**, another** accidentally touches the button and it will switch to the other side.

Call Waiting This function means that when the mobile phone is on a call, a third-party call comes in, and you can use the call waiting function to let the third party wait until the call is made, and this function needs network support.

There is a charge for the mobile phone to open call waiting, and there is also call forwarding and so on.

Enabling Call Waiting is free of charge no matter what the machine is.

Consult customer service, free service!

There is no charge for waiting for calls on the mobile phone, but you need to activate it independently. The specific features of call waiting are as follows:

1. Find and enable "Call Waiting" on the mobile phone menu, start call waiting: dial *43 on the mobile phone, check the current status: dial * on the mobile phone; Take the big mind to eliminate the call waiting: the mobile phone dials

2. During the call, if the user needs to answer another **, as long as he presses the answer button, he can answer the second **, while keeping the first ** continuously; Press the answer button again, i.e. switch to the first ** while keeping the second **; In this way, the switch between the two ** is realized;

3. During the call, if the user needs to dial another **, as long as the second ** is dialed directly, press the answer button to dial through, while keeping the first ** continuous; Press the answer button again, you can switch to the first ** while keeping the second **, so as to realize the switch between the two ** shed beam;

4. When the customer dials the 10086 manual station, the call waiting function is invalid, but if the customer is called, this function will not be affected.

Call waiting means that when a user is answering, another user is calling, and the first one can be left uninterrupted while the second one can be answered. If user A and user B are talking to each other with this function, and two users call to change, such as dispatching, users A and B will hear a "waiting tone", and user C can hear a "ringback tone".

Call waiting is a service that is enabled by default for SIM cards, and China Mobile, China Unicom, and China Telecom are all free to activate and use.

When an activated user A is talking to B, and C** calls in, A will hear "Beep, beep." At this time, you can switch freely between the two BC calls through the mobile phone button operation. When A is on a call to B, A can also dial ** again.

China Mobile's call waiting feature is free of charge.

The call waiting service means that when the user is using the mobile phone to call, he can answer or dial the second ** while keeping the first **, and can switch between the two calls, so that the user will not miss the call in the call, and at the same time improve the flexibility of the call. Suitable for brands: Global Communication Dynamic Zone Shenzhou Travel.

Tariff introduction: 1. Functional fee: exempt.

2. Communication fee: the two ** of the implementation of the switch, during the switchover period according to the brand tariff standard.

Call waiting is free of monthly usage fee, but the call fee of the three parties is charged according to the normal call fee, and the call duration is still calculated because the voice channel is occupied in the holding state.

If you enable call waiting, you also need to enable call hold, which is free of charge.

There is no charge, but if you turn it on to alert, it will be charged.

When you're on a call with A. B called**, as soon as you answered, A was in a state of waiting, and when he hung up with B**, A resumed the call. This function is called dual SIM dual standby dual pass.

Dual-SIM dual-standby dual-pass refers to a mobile phone that connects signals from two communication networks at the same time (by putting two cards), which is the contribution of China's mobile phone industry to the global mobile communication industry. Dual SIM dual standby dual pass is the original function of the mobile phone, and there is no need to collect money.

You can use the following methods to enable the "Call Chaozhou Waiting" function:

2. Log in to the online business hall.

Click "Business Handling", "Basic Business", "Hail", "Call and Wait for Liquid Sail", "Handle Business";

3. Dial *43 on your mobile phone to activate the call waiting function.

You can click on it.

<>1.When you called, you didn't hear the sound of "beep" here, but what you heard directly was: "Hello, please don't hang up, the ** you dialed is on the phone, then the other party is indeed in the absence of respectful words."

2.When you call over, you hear a "lead and beep" voice here (no matter how many times you hear it), and what you hear directly is: "Hello, please don't hang up, the ** you dialed is on the call, then the other party is hanging up your **."