Does intel core i7 2600 support ECC memory 5

Only Intel Xeon series CPUs are supported by ECC memory, which is a product specially launched for servers, while civilian-grade CPUs are not supported at all.

No, you can use memory with ECC check, but ECC check cannot be implemented.

No, servers and workstations are supported with CPUs.

There are three types of RAM: non-ecc, unbuffered-ecc and registered ecc. The first two are UDIMM and the latter are RDIMMs. Non-ECC is common consumer memory with no cache, unbuffered-ECC is memory with ECC but no cache registers, and Registered ECC is memory with cache registers and ECC.

In other words, if you want to use RAM with ECC, you must first have CPU support. RDIMMs require support from both the motherboard and the CPU. The difference between Non-ECC and Unbuffered in UDIMM is whether the CPU supports ECC or not, because both have the same motherboard interface and controller.

Intel's CPUs other than Zhiqiang do not support ECC, which means that Unbuffered-ECC and Registered ECC memory can only be used on XEON, and most of AMD's CPUs support ECC, which means that AMD's CPUs support Unbuffered-ECC memory, but only server U such as Opteron supports RDIMM memory (of course, it must be equipped with the corresponding motherboard).

This computer of yours is a quasi-server configuration. Whether it can support ECC function requires special CPU + motherboard + ECC memory... This computer of yours.

It is the best server infrastructure. You buy a fantastic e3 1230 v2 upgrade then. It's a miracle machine.

This CPU is very popular. Loose pieces are about 1200. Ordinary users take it to their homes.

You can open ECC when you use it... Others can't open it.

The i7 does not support ECC, but the E3 series, which is similar to the i7 in the 1155 interface, can support ECC memory.

Yes, both the CPU memory controller and the motherboard chipset need to be supported before you can use the knowledge point extension, about ECC memory.

ECC memory, i.e., a memory module that implements error checking and correction technology (ECC) is applied. Generally, it is mostly used in servers and graphics workstations, which will make the whole computer system more secure and stable when working. ECC is the abbreviation of "error checking and correcting", and the Chinese name is "error checking and correcting".

Yes, both the memory controller and the motherboard chipset need to be supported.

The recommended answer is unreliable i7 2600 is a 32nm quad-core eight-thread CPU with LGA1155 pins That answer is the first generation i7

Quad core, but with HT hyper-threading technology, so you can see 8 boxes in the task manager.

The memory controller of the i7 2600K can only support 1333 memory by default, which is the same for any motherboard. Although the Z68 motherboard can support 1600 memory by default, it is limited by the CPU memory controller to achieve the efficiency of 1600.

However, the i7 2600K is a non-locking multiplier drop, which can be manually overclocked and can support more than 1600 memory once overclocked.

Memory controller dual-channel DDR3 1333

It supports a maximum memory of 32GB

It's at least 1333M, and it depends on your motherboard.

Depending on what frequency your motherboard supports, 1600 should be fine.

【Incompatible】The i7-3930K does not support DDR3 server memory with ECC.

In fact, the Samsung server disassembles the memory and cannot be lit. Friends in the back [don't fall into this pit].

Yes, but the i7 3930K itself does not support ECC verification function, so even if you plug in ECC memory, it will not be able to achieve the verification function.

Only Intel Xeon series CPUs are compatible with ECC-type memory modules.

Memory can be considered 2 8G DDR3 1600 memory composed of 16G, basically all applications can be handled, if you belong to the enthusiast and don't care about funds, then 32G in one step, 4 8G. The motherboard can consider the new P8Z77-V LX ASUS ASUS motherboard, about 800 yuan, support, PCI-E, SATA, support dual graphics card crossfire. Graphics cardIf you use an N card, you can consider ASUS GTX650TI-1GD5 650TI standard, about 1200 yuan, using the latest 28nm technology, PCI-E interface, just the same as the motherboard version, but the memory bit width is 128bit, the heat and power consumption and frequency are much better than the GTX50TI series, if you consider the future firefight, then choose AMD's graphics card, recommend HD 7850 series, ASUS ASUS HD7850-DC2O-1GD5 Dragon Knight, less than 1400 yuan, the performance is stronger than N card, it is also a new 28nm technology, PCI-E, 256bit video memory bit width is twice as wide as N card.

Look at the motherboard that you use in the following question, Z68 is the best in this series. (New ones don't count).

As for the graphics card, it depends on your budget, if you have any questions, you can directly hi, or ask.

670 seconds 580 is not negotiable, 2600 price of Yingzhong Ice Dragon 670 is the first choice, performance noise is good, the price is also cheap.

Further down are the 7950 of the 2200, the 7870 of the 1800, the 7870 of the 1600, the gtx660 of the 1400, and the 7850It's up to you.

Memory can be done in one step with DDR3 1600 4GX4 or directly 8GX2.

Motherboard: ASUS P8 series, RAM 8G, CPU fan with Cooler Master V6 or V8. The graphics card is recommended to use the Ӣ GTX5800.

But it's a bit expensive to use, but since you bought the i7, it shouldn't be bad for this money. The chassis must be large, and the power supply is Cooler Master 1000W.

4G ASUS P8 series, RAM 8G, CPU fan with Cooler Master V6 or V8. The graphics card is recommended to use the Ӣ GTX5800. But it's a bit expensive to use, but since you bought the i7, it shouldn't be bad for this money. The chassis must be large, and the power supply is Cooler Master 1000W

Graphics card, video memory, 2G memory, 4G+ memory, basically OK.