How many items are taken in the Subject 2 exam, and how many items are there in Subject 2?

The first level: reversing into storage.

Candidates need to find the right spot, pour in from one side and drive out to the other side, and then pour in once from the other side.

Level 2: Side parking.

Candidates need to let the car drive sideways into the parking space, and they need to pull the handbrake to release the handbrake.

Level 3: Curve driving.

The easiest level, just follow the coach's instructions to find a good point, and use the front of the car to paddle the curb stone to pass.

Level 4: Right-angle turn.

After looking at the point, you can pass by slamming the direction.

Level 5: Fixed-point parking and ramp start on the uphill road.

Be sure to pay attention to the location of the fixed park, if the parking position is not accurate, you will be deducted points. When starting, pay attention to find semi-linkage, and never turn off the fire. Remember to pull the handbrake and release the handbrake.

Requirements: Pay attention to the position of the front and back, left and right, and do not slip and turn off the engine.

Subject two, also known as the road test, is a part of the motor vehicle driver's license assessment, is the abbreviation of the field driving skills test subject, the car C1C2 test items include reversing into the garage, side parking, ramp fixed-point parking and starting, right-angle turning, curve driving (commonly known as S bend) five compulsory tests (in some areas there is a sixth high-speed card).

1.Reversing: A project that must be carried out to obtain a small car license after 2013.

Examine the driver's ability to operate the car on site. Reversing into storage is an assessment point in the driver's test. That is, to maneuver the vehicle in motion to correctly reverse into the garage from both sides.

2.Right-angle turn: Right-angle turning is an assessment point of subject 2 in the driver's test, which assesses the ability of motor vehicle drivers to correctly control the steering and accurately judge the difference between the inner and outer wheels of the vehicle when driving the vehicle on a rapidly changing road section.

Hang first gear, release the handbrake, slowly lift the clutch to keep the semi-linkage moving forward at a constant speed, keep the left side of the car wiper left dot (the first rivet) and the yellow line on the right edge of the road at a distance of 20 centimeters, and then look at the front of the car on the left side of the door and a little in front of the door lock to remember this point.

3.Lateral Parking: Lateral parking is part of the second subject of the driver's license test.

Lateral parking is an increasingly common situation in the city, especially when the parking space in the regular parking lot is too tight, and many places will divide the original street on both sides into parking spaces, becoming "side parking spaces".

Line driving: Curve driving is an assessment point of subject 2 in the driver's test, commonly known as S bend. The test requires the vehicle to drive on the S-shaped road surface of the specified width, not to squeeze the road edge line, and to use the direction freely.

The assessment is the ability of the motor vehicle driver to control the steering and control the curve of the vehicle. The purpose is to develop the skills of motor vehicle drivers in the use of steering and the operation of wheel tracks.

5.Ramp fixed-point parking and starting:

Fixed-point parking on uphill roads and ramp start is an assessment point in the driver's test, which includes two test items: first fixed-point parking on uphill road and then on-ramp start-up and walking car, which is one of the five compulsory test items.

Learning to stop at a fixed point on an uphill road and start on a ramp can enable motor vehicle drivers to skillfully control the vehicle when stopping and starting on a ramp, and prevent the vehicle from turning off the engine or sliding backwards when starting on a ramp and causing a rear-end collision.

The content of the test is different according to the different vehicle models of subject 2, as follows:

1. Basic test items: pile test, ramp fixed-point parking and start, side parking, passing unilateral bridges, curve driving, right-angle turning, speed limit through the width limit gate, passing continuous obstacles, 100 meters plus and down gears, undulating road driving.

2. There shall be no less than 6 test items for large buses, tractors, city buses, medium-sized buses, and large trucks.

1) Compulsory test items for large buses and city buses: pile test, ramp fixed-point parking and starting, right-angle turning, passing unilateral bridges, and passing continuous obstacles;

2) Tractor quasi-driving type required items: pile test, ramp fixed-point parking and starting, curve driving, right-angle turning, speed limit through the width limit door;

3) Medium-sized passenger cars and large trucks are required to drive: pile test, ramp fixed-point parking and starting, side parking, passing unilateral bridges, and passing continuous obstacles. Other test items are randomly selected.

3. There shall be no less than 4 items in the quasi-driving test for small cars, small automatic transmission vehicles, small automatic transmission passenger vehicles for the disabled, low-speed trucks, ordinary three-wheeled motorcycles, and ordinary two-wheeled motorcycles.

1) Compulsory items for small cars and low-speed trucks: pile test, ramp fixed-point parking and starting, and side parking;

2) Compulsory items for small automatic transmission vehicles and small automatic transmission passenger vehicles for the disabled: pile test, side parking;

3) Ordinary three-wheeled motorcycles and ordinary two-wheeled motorcycles are required to drive the vehicle: pile test, ramp fixed-point parking and starting, and passing unilateral bridges. Other test items are randomly selected.

There are five items that must be tested in the country for the subject 2 exam: reversing into the garage, side parking, ramp fixed-point parking and starting, curve driving, and right-angle turning, and there are additional items in individual cities.

Subject 2 Examination Requirements and Judging Criteria.

Subject 2 should have 4 items.

The test of subject 2 has five contents: reversing into the garage, turning at right angles, driving in curves, parking on the side, parking on ramps and starting. Each student has 2 chances per exam. I haven't done it twice, and I won't be able to book the exam again until 10 days later.

Back to the warehouse: Examine the driver's ability to operate the car on site, reversing into the garage is an assessment point in the test, that is, driving the car into the garage correctly from both sides in the drill. Side parking:

On-street parking is becoming more common in cities, especially in regular parking spaces. In many places, the dust cavity has been dissipated into parking spaces on both sides of the original street, called side parking spaces. Stop and start at designated points on the ramp:

Ramp stop and start is one of the assessment points of the driver's license test subject 2. The test requires stopping at a fixed position on a ramp with a slope of 10 meters and a slope length of 30 meters, and examines the coordination of direction, braking, and clutching. Right Angle Turns:

The right-angle turn is one of the assessment points in the second question of the driver test, which uses Paizhi to test the driver's ability to steer correctly when driving a vehicle on a sharp curve. Curve driving: Curve driving is the assessment point of the second subject of the driver's license test, commonly known as S curve.

The test requires the vehicle to be driven on a defined S-shaped road width, without pressing the edge of the road, and the direction can be used freely.

The five items in the second subject include: reversing into the garage, side parking, ramp fixed-point parking and starting, right-angle turning, and curve driving.

This is the standard for deducting points for subject 2, the standard of deducting 100 points is full of repentance pants, and the end of the gear is in neutral when the engine is started, and the turn signal is not played.

A standard turn signal with 10 points will be deducted for more than 3 seconds, and if you forget to turn off the turn signal or use the turn signal incorrectly, turn off the engine once.

Deduct five points for stopping halfway.

The first item is reversing into storage:

The standard of deducting 100 points is not in the order of the prescribed route; The body is out of the line and is not completely poured into the warehouse; Before reversing, the two front wheels did not cross the control line; Complete the project in more than 210 seconds.

The second item is side parking:

After deducting 100 points from the standard storage, the body will be out of the line; The project takes more than 90 seconds to complete.

10 points will be deducted for the wheels touching the lane edge during standard driving; Lights or mistakes at the end of the delivery.

The third item ramp fixed-point sock attack stop and start:

The standard of deducting 100 points does not have a fixed point of parking; After parking, the front bumper exceeds the control line by 50cm; After parking, the distance between the body and the sideline exceeds 50cm; Start more than 30 seconds after parking:

10 points are deducted for not tightening the handbrake after standard parking; After parking, the front bumper exceeds the control line by 30cm; After parking, the distance between the body and the sideline exceeds 30cm.

Fourth right-angle turn:

100 points will be deducted to sue the ex-brother for the wrong use of the quasi-crimping line and cornering lights.

The fifth curve drives:

Deduct 100 points for any standard wheel line; Stopovers.

Of course, there are some places where there are more items, and this is determined according to their own province.

There are 5 items in the Subject 2 exam. They are reversing into the garage, side parking, ramp fixed-point parking and starting, right-angle turning and curve driving. Right Angle Turning Tricks:

Idle in first gear, no refueling; Before entering a right-angled bend, try to stay away from the protrusion; When the center of the small triangular window near the protrusion point on the front window coincides with the protrusion point, turn the steering wheel to the side of the protrusion point to the Kemmel macro bottom. When turning the front of the car in a new direction, pay special attention to the right front wheel of the car not to press against the right side of the road. Operation tips for driving in corners:

Keep driving in first gear throughout the whole process, and don't be in a hurry in the direction; Try to walk a big circle after entering the corner. When driving towards a right-hand curve, keep the right wheel close to the right-hand curb and vice versa. Side Parking Operation Tips:

Sitting upright plays a key role in the accuracy of judging each point; Drive into the parking area and park on the right side of the road as much as possible, but don't press the yellow right edge line to avoid reversing too far back to the line. The operation skills of starting and stopping on the ramp: when parking at a fixed point on the ramp, before going uphill, the speed of the car should be slightly faster, so that the car will have a little momentum.

After the rear wheel goes uphill, you should immediately reduce the speed of the car and let the car drive slowly. Otherwise, the speed is too fast, and it will be too late to adjust the relative position of the vehicle to the sideline. Reversing operation skills:

Control the driving speed, use the first gear or reverse gear to idle the whole process, and start at what speed you want; Control the timing of steering, observe carefully during reversing, grasp the key points of steering, and steer in a timely manner; Control the driving route. During the test, the driving route of the car mainly depends on the speed of the steering wheel and the driving speed. When reversing, look at the sideline, correct the direction in time, and keep the car driving in a straight line in the warehouse.