It is good to use a few square wires for home decoration, and a few square wires for home decoration

If there is a condition, go to the line socket of 6 square meters and 4 square meters of millimeters, and the general terminal lamps or lanterns can be used, and the power of the lamp will be used if it is relatively large. When looking for a 6 square meter millimeter of fiber orchid to buy a switch socket, you must choose the kind with a relatively large jack for access cables, otherwise the 6 square meters of millimeter wire will not be able to be placed.

The main inlet wire for household use is 4mm -6mm

General household lighting circuits.

General sockets (ordinary sockets, TV sockets, refrigerator sockets, cleaning sockets, etc.).

High-power sockets such as air conditioner sockets and water heater sockets.

Lighting wires in your home.

Lighting wires are squared. Generally, the power of the home lighting load is not too large, and there are almost 6-8 lamps in the dining room, living room, main and secondary bedrooms, balconies, kitchens, and bathrooms, which are controlled within 1500 watts, and the square national standard copper wire is enough.

Wire for water heater socket.

The water heater is relatively large in household appliances, it is recommended to use 4 square wires, 4 square copper core wires can allow a maximum load of 7000-8000 watts, and the limit value is 8000 watts. Therefore, even if the water heater or bath bomb is turned on at the same time, there will be no major problems, and even if it is overloaded, it will only trip.

Wires for air conditioning outlets.

The air conditioner is also a high-power electrical appliance at home, so the socket is also a 4 square wire, of course, you can also use 6 square wires, but the construction difficulty of doing so will increase, and the area occupied by the socket bottom box will also become larger, and the wiring will become a very troublesome thing.

Wires for ordinary outlets.

The ordinary socket at home can use square wires, and the general load is controlled within 2500 watts. However, if you often use high-power electrical appliances, it is still recommended that you choose a 4 square wire.

Wires for kitchen outlets.

It is recommended to use 4 square wires for kitchen sockets, on the one hand, because there are many appliances in the kitchen, and on the other hand, because of the high frequency of use. Some kitchens are a square line to the top, and then arrange the socket below, with a square wire to connect the fire, all the sockets are connected from the square line separately, therefore, this practice is no problem.

At present, the common wire specifications on the market are divided into square millimeters, square millimeters, 4 square millimeters, 6 square millimeters, 10 square millimeters, etc., according to the cross-sectional area of the conductor.

Lighting fixtures and other places with low electrical power are suitable for using wires in square millimeters;

There are circuit branches in the switch socket, which is suitable for the selection of wires in square millimeters;

High-power appliances such as air conditioners and refrigerators. The power of the main line of the circuit is relatively large, and it is best to use wires of 4 square millimeters and above;

The main line or the ** air-conditioning line has a large current carrying capacity, and the wire that is generally too thin can not bear it, so it is best to choose a wire of 6 square millimeters and above.

The main line of home improvement is generally squared, but the line of the air conditioner should be specially wired, and it is best to choose a 4 square one.

When buying wires, you should pay attention to the quality of the wires, some small shops sell copper cores that do not reach the square. It is best to choose a relatively large storefront, produced by regular manufacturers, inferior wires due to the copper core does not reach the square, the quality of the outside insulating plastic skin is not up to par, which may lead to overheating of the wire during use, frequent tripping, serious may lead to fire. Therefore, it is necessary to be cautious in the choice of wires for home improvement.

Now the new house entrance line is 10 square meters, generally the new decoration of the home electricity are divided into several rows, such as air conditioning each a route, socket a route, lighting a route, high-power water heater a route, for some can be squared, and then there is a kitchen is a large electricity consumer, more and more kitchen appliances, you can consider a row of 4 square lines.

The entrance wire is 10 square copper wires, 6 square millimeters of copper wires for home sockets, and square millimeters of copper wires for switch wires and lamp port wires.

This mainly depends on the power of your household appliances to calculate, the total power of the appliances can be calculated, you can determine the size of the inlet line. Then for a single line, you can think about which appliances to bring, and what the power is can be decided. A square wire can carry two powers.

6-10 square copper wire for the entrance line. Square copper wire for lighting, square copper wire for socket. Air conditioner, water heater kitchen with 4 square copper wires. Mingda fireproof home improvement line is a good choice with reliable quality and stable performance!

Choose the wire specifications according to the power of the household appliances, such as the conventional choice of lighting kitchen appliances ** air conditioning home wires.

Wire quality grade selection:Conventional wire OEM brand (no manufacturing factory such as: gold standard and other OEM products), medium brand selection (domestic independent factory manufacturing such as:

Far East and other independent manufacturing plants), high-grade brand selection (there are independent factories in China, after the same brand of wire sample test after the comparison test of high-quality wires, such as: fortes and other strict comparison test of high-quality wires).

How many square meters of household wires are appropriate? The decorator teaches you two points, practical and cost-effective.

How to choose home improvement wires? What size wire is appropriate? The old electrician teaches you hands-on, practical electrician techniques!

You need a professional to help you with this, sorry

Do the math how much it will cost you to renovate your home

When decorating the house, the circuit wiring is a very important link, not only to the reasonable layout but also to choose the appropriate load of the wire, so how many square meters of the wire at home is usually used?

Home improvement generally uses a few square wires.

There are usually three kinds of wires for household use: square, 4 square and 6 square, and the actual wire situation needs to be decided according to the size of the electrical power consumption; If you are connected to a high-power electrical appliance, you can use 4 square wires; If it is an electric light or an ordinary socket, you can use a square wire; Most of the households are entered with a 6-squared line.

Where to use a 4 square line.

1. Kitchen, kitchen uses many electrical appliances, such as microwave ovens, range hoods and many other high-power electrical appliances, and most of the time are working at the same time, so the kitchen socket wire should use 4 square wires, 4 square wires are relatively hard, when connecting the socket, some electricians will use square wires to connect, which is also okay, but the 10A socket can only be connected to the square wire, and the 16A can only be connected to 4 square wires.

2. Air conditioners and refrigerators, these two are also electrical appliances with high power consumption, so they should also take a separate line of 4 square meters.

3. Toilets, electric water heaters, bath bombs, heaters and other electrical appliances in the bathroom consume a lot of electricity if they work at the same time, and they must also install 4 square wires to prevent heating caused by excessive load.

What is the difference between a square line and a 4 square line.

Many people will choose to use 4 square wires to install sockets when using water and electricity wires, and the lighting circuit is squared, which is not the best solution, although the 4 square wires are just a few more wires than the square wires, but the ** in the middle is a lot worse, so in addition to the above-mentioned electrical appliances, other socket positions only need square wires are enough, for example, you just use the mobile phone at the bedside to flush a battery and use the 4 square socket is not a bit of a waste.

In summary, when purchasing wires, we must buy national standard wires, and there will be safety guarantees when using them, if you use inferior wires or wires that are too small, it is easy to cause short circuits, fires and other accidents.

Enter the area and get the decoration for free**].

The answer to this question depends on the size of the home and the number of wires that need to be used. In general, an average three-bedroom apartment requires the use of about 200-300 square meters of wires. However, the specific amount of wire usage also needs to be calculated according to the actual ear burial resistance of the root sap traces.

It is best to choose six square meters of the main circuit of home decoration, because there are more electrical equipment in the home circuit, and the main circuit is larger, which is convenient for expanding the electrical equipment in the future.

Under normal circumstances, 4 square meters is enough, but it depends on the number of electrical appliances used in the home and the size of the room. If the normal branch is a socket, 4 square is enough.

That's it. Household wires are not fixed, but are chosen according to the power of the appliance used.

The main incoming line for household use is 4 square - 6 square meters. The general household lighting circuit is squared. Socket with squared! Air conditioning with 4 squares.

Ordinary socket circuit: choose the square wire. High Power Socket Circuit:

If the electrical power is large, at least square wires should be selected, and if multiple high-power sockets share a circuit, 4 square wires should be chosen. Kitchen and bathroom socket circuit: There are many high-power electrical appliances in the kitchen and bathroom, so just choose a 4 square wire.

In daily life, electrical appliances are completely sufficient for square meters, and there is no need to use such thick wires, such as some air conditioners and refrigerators, and the power will not exceed this range, only very large refrigerators or other electrical appliances use thickened, similar to about four square meters of wires.

In ordinary daily life, the power of ordinary wires generally reaches more than 3000, but if the thicker wire may reach about 4500 watts, this is actually an unnecessary thing, there is no need to buy such a thick wire, do not fall into the misunderstanding set by the decoration master, it is not the so-called thicker the line, the better, but to be suitable is the best, there is no need to waste the money to use the thick wire.

For home renovation, we most often use 4 square wires and square wires.

The lighting wire is generally 1 5 square is the best, the electric lamp, spotlight and so on used in the general home are connected together, will not exceed 500w, even if it is a large chandelier will not exceed 1000w, so the use of 1 5 square national standard copper wire is enough.

Nowadays, most of the home decoration has divided the lines very carefully, and there are many socket lines. Therefore, the socket is generally squared wires.

How many kilowatts of electricity can be withstood by 4 square wires, it depends on the 220V electricity consumption of the family, which is generally used alone for air conditioners and water heaters.

In home decoration, most of the wires are laid in the way of casing concealment, the wires used are single-core plastic copper wires, and the thickness of the wire diameter used should be considered according to the charge load of different circuits, generally speaking, the lighting and ordinary sockets are the square wires, the empty wither, kitchen sockets, bathroom sockets are 4 square wires, and there are some wires connected to the equipment with large power consumption are also 6 square meters, such as instantaneous water heaters, and the entrance line is generally 10 square meters.

The thickness of the selected line is matched according to the size of the power of the electrical load used by themselves, the general inlet line is matched with 10 squares, matched with the air switch of 63a, and the rest is calculated by itself, you can give a parameter, the high-power load is matched with 6 square lines 32A leakage protection circuit breaker, 4 square matches 25a, and the square matches 16a.

In the process of decorating the new house, the home improvement wire is an indispensable process, as part of the hydropower project, related to our future home safety, and the home improvement wire is also an unavoidable project, there is a problem with the circuit construction, there will be a short circuit overload, so in the new house decoration to take it seriously, today the staff will share the new house decoration home improvement wire attempt, I hope it will help you.

1. There are three types of power cords.

The red one is the fire line, the blue one is the zero continuation, and the one in Jia color is the ground line. When the new house is decorated, the power line pipe should be pre-set in the Pu body groove, to ensure that the surface of the casing is recessed into the wall for a distance, after the power line is connected, the wall should be wet, closed with 1 to 5 alkali, and the sealing surface should be flat and low dry wall. The installation of the power back box should be stable, and the bottom surface of the panel should be flat and consistent with the wall.

The direction of the power cord for the decoration of the new house should be horizontal and vertical, not oblique.

2. Switch installation.

Rocker switch installation method: the lower end is pressed in for on, and the upper end is pressed in for disconnection. When the socket switch and panel are fastened, screws should be used, and buried nails or stone board screws should not be used to damage the bottom box.

The bedroom of the new house decoration should use double control switches. Kitchen electrical outlets should be set up side by side. The switch wire box is generally above the ground, and the switch should be about one meter above the ground.

According to the power of your household appliances at home, the power that the general domestic wire 1mm2 can withstand is about 2800w, if it is an imported brand Haoxun cable, the same 1mm2 can withstand the power is 6380w, I listed the power and current that various specifications of the wire can withstand, and I calculate how thick the wire you need to use according to the number of household appliances.

Home improvement line is generally between 1 6 square meters, the size of the wire is based on the scientific and reasonable distribution of cables, for example, the maximum flow of the household line is also the main line with 6 square meters, air conditioning, electric water heater high-power electrical appliances with 4 square meters, electric fans, sockets with squares, lighting lines with square is enough, the following figure is collected from the brand Minxing cable that I think is better: