-
Anonymous users2024-02-061. Wheelbase: that is, the distance between the front and rear wheels. This parameter affects the overall feel of an Allegro:
The longer the wheelbase, the more stable it feels, but the slower it is; Vice versa. Usually the wheelbase is about 50cm, and the wheelbase of the freestyle plate is only about 40cm; Old-fashioned boards are 55-80cm.
2. The board surface is usually made of 7 layers of sugar maple wood rolled by a usable skateboard. Some plates have a slick layer at the bottom of the plate made up of a special chemical.
3. The foot socket refers to the curved and concave part of the board surface. In addition to freestyle boards, popular boards now have foot sockets, which is also to give skateboarders better control of the board.
4. Since most of the current boards are double-warped (old-fashioned boards are easy to separate), the two seem to be similar. In general, the head of the board is longer than the tail of the board, and sometimes the angle is also larger.
5. The most popular size of wheels used to be 60-70mm, and freestyle wheels are usually 57mm. Generally speaking, large wheels are good for maintaining speed and over small obstacles, but acceleration is not as fast as small wheels, and it is also too bulky. Small wheels are suitable for playing tricky moves.
6. The hardness index is usually measured by the Sauer A coefficient of Sauer, and the larger the value, the greater the hardness. Generally speaking, the hardness of the wheel is inversely proportional to **, and the speed of the hard wheel is also faster, but if the road surface is too poor, it will not work. The wheels around 95a also performed well on slightly worse ground.
7. The standard of the bridge is: the distance between the two wheels located on the same bridge should not be greater than the width of the board (at least the same), otherwise it will affect the turning and action of the board.
8. The pedestal mountain bridge refers to the part of the bridge that is in contact with the plate surface, and after countless tests, aluminum alloy has been proved to be the best pedestal material.
9. The main screw: The screw used to combine the bridge shaft with the base (there is a PU pad at the joint).
10. The main part of the main bridge, the part used to slide when doing 5050 and other actions.
11. The pivot is the junction between the front end of the main frame and the base, in which there is a plastic PU pad.
12. The bridge pad is a gasket made of plastic or other substances that is placed between the base and the layout to play a cushioning role.
13. Sand is the sand placed on the layout to increase friction. It is generally black, but there is also patterned sand.
14. The bearing is placed in the wheel to support the gliding. There are two kinds of double seals and full seals, and double seals should be a better choice for skaters.
-
Anonymous users2024-02-05To get started with skateboarding, you must first choose a suitable skateboard, prepare the right protective gear, and you can play it only when you are safe.
There are many kinds of skateboards, including double warped, fish boards, long boards, drift boards, etc., skateboards are mainly divided into game boards and professional boards.
The double warp is composed of the board surface, the bracket is teased, and the four wheels are composed, and there is a PU pad that can be cushioned on the top of the bridge.
Longboarding is a very stable type of skateboarding, and it is also very fast, so it is suitable for rappelling at the beginning, as well as flat freestyle and board dancing.
The small fish skateboard is very flexible, and it is also very convenient when carrying, which is very suitable for transportation, and it is also more flexible when doing movements.
When playing skateboarding, after confirming the position of the front foot, the body and the skateboard should be in the same direction, and the position of the toes should exceed the bridge nail by one centimeter, and it is not easy to control the direction and balance if it is too far forward or backward.
-
Anonymous users2024-02-04One Foot Revert is a more creative skateboarding action. The front foot is placed at the front screw, the back foot is raised, and then the body is turned. This movement requires the cooperation of our whole body, so that the whole process is very smooth.
In the same way, if the proficiency is not enough, we can turn the angle to be narrowed down to practice.
-
Anonymous users2024-02-031. Determine the front foot, use the support to go on the board, and independently return to the upper board three ways!
2. Stand with your feet together and let someone push you. The first foot is the front foot. When skateboarding, put your front foot in front and your other foot on the ground.
3. After determining the front foot, let's take a look at the method of putting the board on the board with the help of supports, 4. Support the wall with both hands and let the wall help you get on the board. Keep your feet parallel and your back straight. The front foot rests on the board and the legs are bent.
5. When you are just on the board, your feet are vertical. Slowly adjust yourself to start skateboarding with your feet parallel to each other.
6. Do not use the support to leak the balance plate, put on the correct posture, bend the knees, and quickly put the back foot on the board. After getting on the board, adjust the whole body state and maintain balance.
-
Anonymous users2024-02-02Beginners need to do the following skills to skateboard:
1. Skating is very, very important, skating is the foundation of everything, you should calm down, practice skating carefully, and then consider advancement.
2. Skateboarding requires practice, and if you want to play well, there is only one word for the trick: "practice". Even if it's ten minutes a day, it accumulates and forms muscle memory.
3. Summarize experience (experience in experience):
Skateboarding is a sport that is meant to bring you joy, and in order to improve your technique, it is not advisable to overload your practice. That will only make you physically and mentally exhausted, not very effective, and not happy.
4. Don't skateboard alone, find a "master" as your teacher (the master puts quotation marks because you will definitely be able to surpass him). He can help you correct your movements and make you avoid detours. And playing alone will only get worse and worse, the more injured and unconfident you are.
5. Don't feel inferior, the "master" just came into contact with skateboarding earlier than you. Don't be afraid of other people's eyes, whether you skate well or not, have fun on your own, focus on skateboarding, and you will be happier.
6. Overcome fear, generally speaking, the biggest fear of newcomers is wrestling. But there is no skateboarding that does not wrestle, and "falling" is also one of the skills that skateboarding needs to master.
-
Anonymous users2024-02-011. Go up and down the slide plate.
There are two ways to stand: one is to have the left foot in front and the toe to the right, which is also called the forward standing method; The other is that the right side of the ball is in front of the foot, and the toe is to the left, which is also called the reverse standing method. Most people skateboard with the former standing method.
The techniques described later are based on this standing method. If you don't think it's comfortable to stand like this, you can also change the direction and use the second standing method.
1) Preparation: Stand on the ground with your feet on the ground and the skateboard flat on the ground in front of your feet. Upper board: Place one foot on the front of the skateboard with the other foot still on the ground for socks.
2) Shift the weight of the body to the upper foot, lean forward slightly, bend the knees, and extend the arms to maintain balance.
3) Step on the ground and gently push the ground, then receive the skateboard and place it on the back of the skateboard, at this time, the whole body and the skateboard will start to slide forward.
When sliding on a skateboard: (1) When the skateboard is not completely stopped and is still gliding forward, put the center of gravity on the front foot gear and then put the back foot on the ground like a landing gear.
2) Once the back foot lands, shift the weight to the back foot and lift the front foot so that both feet land on the side of the skateboard. When you can get on and down the board with ease, you should try to switch the position of your front and rear feet to familiarize yourself with the reverse glide position.
2. Inertial gliding.
The skater places his right foot on the middle front of the skateboard to the right. Step on the ground with your left foot and focus on your right foot. Push the ground with your left foot to slide the skateboard forward, then put your left foot up and step on the back of the skateboard, maintain your standing balance, slide for a while, and then press the ground with your left foot and repeat.
After practicing this repeatedly, you will be able to do longer distances after mastering it well. You can start with 10m, 20m, then add to 50m, 100m, and practice repeatedly until you can easily and skillfully accelerate the skateboard to stop, and you need to master the direction and speed of the skateboard when the center of gravity changes.
Once, Xiao Zhi was on his way home. A middle-aged man in sunglasses followed him closely. Suddenly, the man suddenly grabbed Xiao Zhi's arm and said with a smile >>>More
Answer] :d the declaration that the use of machinery and equipment may produce environmental noise pollution, the construction unit must be declared to the local people's environmental protection administrative department at or above the county level where the project is located 15 days before the start of the project. The Law on the Prevention and Control of Environmental Noise Pollution stipulates that construction operations that produce environmental noise pollution are prohibited at night in areas where noise-sensitive buildings are concentrated in urban areas, except for emergency repairs, emergency operations, and continuous operations that must be carried out due to production process requirements or special needs. >>>More
The conditions for the formation of fog are cooling and humidification, which increases the water vapor content. This is formed by radiative cooling, which mostly occurs at night and early in the morning when it is clear, breezy, and the water vapor near the surface is relatively abundant and stable, or there is a temperature inversion, which is called radiation fog in meteorology; the other is the fog formed by the horizontal movement of warm and humid air, passing through the cold ground or water surface, and gradually cooling, which is called advection fog in meteorology; Sometimes fog formed by both causes is called mixed fog. It can be seen that those who have these conditions are in late autumn and early winter, especially in the morning of late autumn and early winter. >>>More
The killer whale bai is a large toothed whale with a length of 8 10 meters, a weight of about 9 tons, a black back, and a belly. >>>More
Well, Qu Shui has said it very well, but there is one point, you usually have to raise the speed when you train, and there is still time and opportunity for you to play according to the plan? It's not like seizing the opportunity to give him a few legs. that's you.