How to solve the problem that the mobile phone login cannot open the web page? 20

1. If you can't access the Internet, please try to turn off and restart; Please check whether the maximum flow rate threshold for this month has been reached; Please check whether your phone settings mobile data is turned on; Set the mobile data option APN and whether the name is set to 3GNET.

2. If you still can't access the Internet, it is recommended that you troubleshoot in the following ways:

Check whether there is a network, it is recommended that you can use it in a place with a strong signal;

Check whether there is still a credit in the account, if the balance is insufficient, you need to recharge before you can use it;

Confirm whether the parameters of the mobile phone have been set;

Check whether the USIM card is inserted, if it has been inserted but still cannot be used, it is recommended that you go to the business hall to check whether the USIM card is faulty, or replace the card for testing;

Check whether there is a problem with the mobile phone, it is recommended that you change the phone for testing;

In case of traffic capping, it will also lead to the inability to access the Internet;

The number has not been registered with the real name, and the real-name registration has not been completed within the time limit, and the service will be suspended;

3. If it is not the above situation, it is recommended that you contact the local manual customer service for consultation, and the actual situation shall be subject to the local policy.

Tools Raw materials.

Android phones. WiFi router.

Method steps.

The problem phenomenon is as follows, the wifi connection information is full, ** can not be opened, the web page can not be found, and other software can not be connected normally.

On the main interface of the phone, activate the function menu of the phone, and click the system settings to enter the advanced settings of WiFi.

Click "WLAN" to enter the wifi option interface, some models of Android phones may have different names due to the UI interface customized by the mobile phone manufacturer.

The WiFi list shows a lot of WiFi that has been searched for signal, select the WiFi name (SSID) to connect to yourself, or press and hold the function options menu to activate this WiFi connection, and click "Modify Network".

Enter the familiar wifi password input interface, tick "Show advanced options" and slide down.

You can see that the default IP address setting of wifi is dhcp to automatically obtain ip address, in order to make the network more stable, we can also change it to a static ip address at will, and the registered ip address and gateway need to be consistent with the network segment and gateway set by your wifi router.

The DNS settings also need to be the same as those obtained in the router, if you can't find it, you can also use the generic DNS address or, as shown in the figure, you can fill in the common DNS addresses for DNS1 and DNS2 (alternate DNS) respectively, and click Save after setting. Go back and try again to see if you can surf the Internet, if there is still a problem, you can take the mobile phone with normal Internet access to check whether the wifi information obtained by this mobile phone is consistent, if the problem is still the same, then you have to consider whether there is a problem with your mobile phone wifi module (caused by flashing), send it for maintenance.

If you are using a vivo mobile phone, you can check how to check if the mobile phone cannot open the web page

1. Switch network test.

Please switch the network (Wi-Fi or data network) to determine whether the current network is the cause.

2. Use other mobile phones for comparison and testing.

Use other mobile phones around you to visit the same web page, if the same phenomenon occurs, it is your own reason, it is recommended that you try to change the time period.

3. Clear browser data.

Press and hold the browser icon on the desktop - Application Information - Storage - Clear Data, please back up the bookmark data to the cloud service in advance.

Solution: The phone can't open the web page normally:

1. There are many reasons why the browser in the mobile phone cannot be opened, first of all, make sure that the mobile phone network is not connected normally, and enter the mobile phone network connection interface.

2. If the mobile phone network is normal, you can enter the mobile phone traffic device, clean up the cache and enter the toolbox of the mobile phone browser, find the settings button and click to enter.

3. In the toolbox of the mobile browser, you can find the clear data function, click the function button to clean the cache of the mobile browser.

4. Software cleanup. If none of the above operations can help well, you can use the cleaning software in your phone to clean up the junk in your phone's browser and free up space on your phone.

The mobile phone network is not good because the signal will be affected by various factors such as terrain, landform, and tall buildings during the propagation process, and if you are in a relatively closed place, the signal will be affected. Here's how to deal with it:

1. Turn the phone on and off again and try again;

2. Swap the SIM card to a family member's or friend's phone and try again.

3. Check whether other Unicom users around you have signals;

If you can't solve the network signal problem, you can contact human customer service for feedback.

There are several reasons for clicking on the mobile phone** to show that the web page cannot be opened: 1. The mobile phone is not connected to the network, and it must not be able to open the web page. Solution: Reset the cellular network settings or try again after connecting to Wi-Fi.

2. The mobile phone network speed is abnormal, and the network speed is too slow, resulting in the web page not loading normally. Solution: It will be better to connect to wifi or go to an open outdoor place to move the network, then reopen the webpage and try.

3. The problem itself, no longer operating or the server failure or being banned by the relevant departments because of violations, this is inaccessible. Solution: In this case, you can choose to wait or contact the ** operator to ask.

Hope it helps, dear.

Reason: The web page cannot be opened due to an error (error code 118) in the mobile phone browser, and it is recommended to double clear the mobile phone to solve the problem.

Workaround:1First, turn off the phone completely;

2.After the phone is completely shut down, you can see that the phone can be seen by pressing and holding the volume up button + power button of the phone (press the two keys together) to enter the recovery interface in the shutdown state;

3.Factory Reset: Erase user data and restore factory settings (an option that must be performed before flashing);

4.Clear cache partition: clear the system cache (execute before flashing, you can also try this option if there is a problem with the system, which can generally be solved);

Note: In recovery mode, pressing the volume up and down keys indicates selection, and pressing the power button indicates OK.

5.Select Factory reset and clear cache partition and then reboot.

6.After clearing, restart your phone.

Special Notes::

Unable to enter recovery mode.

If you are double-clear, please unplug all connectors, especially the charger! Then try to enter the recovery mode again, otherwise the erecovery mode will be entered, as shown below.

1. Switch network test.

We recommend that you switch the network (Wi-Fi or data network) to determine whether the current network is the cause.

2. Use other equipment for comparison and testing.

Use other devices around you to access the same web page, if the same phenomenon occurs, it is your own reason, it is recommended to try to change the time period.

3. Clear browser data.

How to back up your bookmarks: Go to the browser - click the " " icon - Favorites History - Favorites Sync, and the cloud synchronization can be completed.

First check if the network or mobile data is on, open Settings, tap Wireless & Network, WLAN, turn on the WLAN button icon, reconnect to the network, go back to Wireless & Network, click Mobile Network, turn on the Mobile Data button, exit the page.

Open the browser, click the three dots, Settings, Clear Browser Data, Tick the Clear option, Clear Data, Clear, When you're done, long press the phone power button on the exit page, and click Restart your phone.

The mobile phone signal is full on behalf of the mobile phone can receive the signal normally, the operator network coverage in this place is no problem, but the network is divided into 2G, 3G and 4G network, the current 4G network is the fastest network, 2G and 3G network are relatively slow, if the mobile phone uses 2G or 3G network, although the signal is full, but the original network speed is very slow, so there will be no way to open the web page. The network mode needs to be selected correctly.

Refresh or exit to get in, otherwise it's the ** that's wrong.

The web page is the basic element of the organization, and it is the platform that hosts various applications. In layman's terms, your website is made up of web pages, and if you only have a domain name and web hosting and don't make any web pages, your customers will still not be able to access yours.

A web page is a plain text file containing HTML tags, which can be stored on a computer in a corner of the world, a "page" in the World Wide Web, and a Hypertext Markup Language format (an application of the standard Universal Markup Language with a file extension. html or. htm）。

Web pages often use image files to provide pictures. Web pages should be read through a web browser.

If the mobile phone prompts that the network is abnormal, please check the following conditions:

1. If you don't restart your phone after upgrading to 4G**, you won't be able to use the Internet function normally;

2. Confirm whether there is a network, it is recommended that you can use it in a place with a strong signal;

3. Check whether there is still a phone bill in the account, if the balance is insufficient, you need to recharge before you can use it;

4. After 3-5 minutes of power off, restart the phone and try again;

5. Check whether the USIM card is inserted, if it has been inserted but still cannot be used, it is recommended that you go to the business hall to check whether the USIM card is faulty, or replace the card for testing;

6. If the traffic usage reaches the maximum value in the current month, the network will be automatically closed, it is recommended that you pay attention to our SMS reminder or inquire about the **product description.

First, the cause of the failure:

1. The network service of the mobile phone is different from that of the computer, and whether the computer can open the web page depends on the network speed and DNS server.

2. Some web pages can not be opened on the mobile phone but can be opened, which means that this web page is a wap web page specially made for mobile phones, just like almost every web page has a mobile phone version at the bottom and a computer version.

3. Some web pages are too large in size, and opening them on the mobile phone will produce a lot of cache or viruses on the network page, which will occupy a lot of RAM, and the mobile phone does not necessarily have so much memory, so the web page cannot be read normally, cannot be opened, or the font arrangement is chaotic and misplaced.

4. When most web pages are basically in the same network environment, mobile phones and computers can basically be opened, but there are also a few web pages that can only be opened by one party, which is a normal situation and is not a problem with the device.

5. The request sent by the computer to the gateway is different from that of the mobile phone, and the gateway response is also different.

2. Solution:

2. Try to open your own ** on other people's computers, see if your ** can't be opened on other people's computers, if it can be opened on other people's computers, then try to clean up your browser cache and then try to open it with your own computer**. If you can't open your ** on someone else's computer, it must be a problem with the computer version of **, please check** to fix it.

3. DNS is not feasible. Check if your computer's DNS is correct and feasible, if it is not the default setting, you can use the DNS Preferred Reset of Security Guard.

4. Insufficient browser plug-ins. See if some of your browser's plugins are disabled, and if so, re-enable them.