The best way to apply reflective film is how to paste it

1. Open the outer packaging of the screen film (paper shell), take out the film, and check the screen to see if the size is suitable.

2. Wet the rag with detergent, pay attention to the rag must choose the one that does not fall off, and it is generally given when you buy the film.

3. After the screen is wiped clean, check whether there are any foreign bodies, because if there is a residual foreign body, it will blister when the film is applied.

4. Stick the torn film to the screen while tearing off the protective layer inside, a good computer screen film is adsorbed by static electricity, so when pasting the film on the screen, it will be automatically pasted.

5. After the film is completely attached to it, you can use a tool to gently press the film, and you can use a bank card or something like that to prevent the film from foaming if it is not adsorbed tightly with the screen.

I've had this question before.

Paste the construction requirements.

The reflective logo of the body should be pasted on the surface of the body without obstruction, easy to see, smooth and continuous, and without dust, water stains, oil stains, rust stains and no paint layer warping.

The dust on the surface to be pasted should be wiped off before pasting. If there are oil stains or stains, remove them with a soft cloth dipped in a degreasing solvent or cleaning agent, and paste them after drying. For the parts where the paint has been soft, pulverized, rusted or warped, this part of the paint should be removed, sandpaper should be used to polish the part and do anti-rust treatment, and then paste the body reflective logo.

As a kind of universal reflective film product with the highest market share in the domestic market, the scope of its use is becoming more and more extensive, and there will be more friends interested in the application of basic common sense in use. So here's a little bit for you to know.

1. The service life of the transparent reflective film, after the purchase, understand the service life first, and it is best to use it within two years to cause unnecessary losses.

2. The best storage temperature of the general reflective film is 18 26 degrees, and the best storage humidity is 10 60. The storage of transparent reflective film is no exception.

3. Before preparing to use, it is best to place the transparent reflective film in an environment of 18 to 26 degrees for 24 hours, and then use it, the effect will be better.

4. For the same type of products with different batch numbers produced in different batches at different times, there may be slight color differences, so it is better to purchase the same batch of products when using larger surfaces.

5. For large-area sign films, try to paste them from the longitudinal direction to reduce the number of connections of transparent reflective film materials.

6. At the same time, all color-matched bright reflective film materials are ordered, and the continuous signs together can only be used with the same batch number of materials.

7. The directional transparent reflective film should pay attention to the same direction when pasting the film, so as to avoid obvious differences in reflectivity;

8. Film substrate: It is recommended to use correctly treated aluminum plate, stainless steel, and glass fiber reinforced plastic plate as the film substrate, such as rubber, plastic, etc. The user must decide for himself the appropriateness of the application of the transparent reflective film used, and all problems arising from it are at their own risk.

9. Film temperature: When the surface temperature of the bottom plate is above 18 degrees, the film operation can be carried out, and the more suitable use temperature is about 25.

It can be pasted, as long as it does not affect the normal driving, it can be pasted, and the classic color is selected on the color, and the traffic police on the road will not stop you.

Yes. Reflective sunscreen film is particularly easy to reflect, which affects the driver's line of sight and vision, and is very prone to traffic accidents.

Yes, it is not allowed because such a sunscreen film will affect the light transmittance of the car after it is applied.

Yes, if it is a mirror, there will definitely be a fine, because such a practice does not comply with the relevant regulations.

<> "How to paste car reflective film?

Car reflective film adhesive method: First of all, the car body needs to be washed first, and it is best to spray the washed body with diluted dish soap. After the cleaning is done, the car reflective film needs to be positioned in the position that needs to be arranged.

After that, use a hard card or other object to scrape out the moisture in the paper and dry it with a hot hair dryer. Wash the car until all the stickers are firmly attached to the body of the car, this is to prevent the newly applied stickers from falling again.

Reflective film is very common in daily life, and it is widely used in road traffic, whether it is pointing to the alarm sign, roadside signs, or triangular warning cone and exit warning post are all applied reflective film. The reason why such a wide range of applications is to improve the safety of night driving, even at night, so that all kinds of signs can still have the desired effect. It's common on the road, but have you ever noticed that reflective film can be applied to trucks?

After the application of reflective film in road signs became popular, the application of reflective film in vehicles is also increasing day by day, striving to reduce night traffic accidents from various aspects. In fact, the main purpose of sticking reflective film on the truck is to show the outline, and it can be pasted on the entire edge of the outline of the truck, so that the rear car can clearly avoid the huge truck and avoid the accident. There is also a need to stick it above the license plate at the front and rear of the car to extend the distance between the rear car and the truck, so as to prevent the driver from driving too fast at night and being unable to avoid the rear-end collision caused by the truck in front of him.

Of course, there are many other places where reflective film can be pasted, and you can judge according to the actual body of the body.

Vehicle reflectors are designed to alert traffic when driving at night, providing a faster safety factor. Although in our country's policies and regulations do not necessarily have to be a car to paste reflective strips, it does not mean that you can stick them at will, otherwise you will be punished by the traffic police.

First of all, the best position for our car to paste reflective strips is on both sides of the front bumper There are also wheel eyebrows, but it should be remembered that you can not cover the license plate number, otherwise the traffic police will find out, whether you are intentional or unintentional, it will designate you This is also a personal behavior that covers the license plate, not only a penalty of 200 yuan, and deduct 12 points from you, I firmly believe that you do not want to deduct so many points for no reason, so these aspects or have to leave desserts.

It should be noted that the reflective strip of the car does not need to be pasted too much, and too much will be particularly eye-catching, endangering safe driving at night. And if you have more than 30% of the standard for pasting reflective strips, you will have to report to the vehicle management office, otherwise you will be suspected of illegal modification. There is also a choice of reflective strips is also said, the first quality level must be good, and to buy these reflective strips containing "3C" Chinese certification certificate, to prevent the actual effect of returning to the light due to the application for too long.

Car reflectors are designed to alert oncoming vehicles when driving at night, providing a better safety. Although China's laws and regulations do not have to paste reflective strips on cars, it does not mean that you can stick them casually, otherwise you will be punished by the traffic police.

First of all, the best position for our car to paste reflective strips is on both sides of the front and rear bumpers, as well as the position of the wheel eyebrows, but it should be remembered that the license plate must not be blocked, otherwise the traffic police will find it, whether you are intentional or unintentional, you will be designated This is the act of blocking the license plate, not only a fine of 200 yuan, but also deduct 12 points from you, I believe that you don't want to be deducted so many points for no reason, so you still have to keep a snack in this regard.

It should be noted that the reflective strip of the car should not be pasted too much, too much will be particularly eye-catching, affecting the safety of driving at night. And if the range of reflective strips you paste has exceeded 30%, you need to go to the vehicle management office to report, otherwise you will be suspected of illegal modification. First of all, the quality must be good, and you should buy those reflective strips with the "3C" national certification mark to avoid no reflective effect due to too long use.

Car reflective sticker method:

1. Prepare tools in advance, dilute a little dish soap, tape, towels or rags, plastic rulers or rubber scrapers, and hot hair dryers;

2. Use a towel or rag to clean the surface of the body of Pipei;

3. If there is moisture, please wipe it dry, put the sticker to the place where you want to paste, and fix one side with tape;

4. Slowly tear the separating paper on the sticker;

5. You can spray a small amount of diluted dish soap at this time on Tan Huiqin, and if you make a mistake, you can use this to move the sticker slightly, which also helps to squeeze out the air;

6. Use a plastic ruler or rubber scraper to slowly paste the sticker and squeeze out the air;

7. Carefully tear off the transfer film and dry it with the hot air of a hair dryer;

8. The width of the body reflective logo material should be selected from the following values, 50mm, 75mm, 100mm, when some types of vehicles can not paste the 50mm wide body reflective logo, two 25mm wide body reflective logos can be pasted in parallel.

Pacific Automobile Network] car film reflective, in this case, the quality of the film you choose is not good. Or it may be caused by the wrong color. It is recommended that you change to a better car film and re-apply it.

Autotintfilm is a film-like object attached to the front and rear windshields, side windows and sunroofs of the vehicle, and this film-like object is also called solar film or heat insulation film. Its function is mainly to block ultraviolet rays, block part of the heat and prevent the occurrence of injuries and anti-glare caused by glass splashing, and at the same time, according to the one-way perspective performance of the solar film, to achieve the purpose of protecting personal privacy. In addition, it can also reduce the damage caused by ultraviolet radiation of the items in the car and the sail of the personnel, reduce the temperature in the car through physical reflection, and reduce the use of car air conditioning, thereby reducing fuel consumption and saving some expenses.

Riders in the car film, to carefully ask the reflectance of the car film, we know that the reflectance of the glass itself is 8, the reflectance of the general American original car film is between 7 -20, objectively speaking, when the reflectivity exceeds 17, it will have a certain impact on the driving under special conditions (such as rain, morning and night), high anti-letter car and light rate affect driving safety, but some manufacturers do not even mark the reflectivity, the real internationally renowned manufacturers not only mark the external reflectance, but also mark the internal reflectance, Let the car owner consume clearly.

How to choose the film: for the selection of the specific product model of the solar film, it needs to be determined according to the owner's own concerns, usually heat insulation, privacy, color matching, reflectivity and other aspects are the key factors to consider, which can not be ignored. Here's an example:

Car owners who attach importance to heat insulation and privacy can choose the Dragon Film Smart Series, because its visible light transmittance is more than 70%, the ultraviolet blocking rate is more than 99%, and the visible light reflection rate is 18%, so the sliding performance in heat insulation and privacy is outstanding, which is an ideal choice.

Photo by Chen Yalan of Pacific Automobile Network).