Midea s electric pressure cooker can t be turned on What should I do It seems that it is not covered

Solution: First make sure that there is no pressure in the pot, first close the lid in place in the direction of closing, and then use the chopsticks to open the lid and lock the valve to press down and press it into place, and then rotate it in the direction of opening to open the lid to open it.

First of all, make sure that there is no pressure in the pot, and then close the lid firmly in the direction of closing;

Then use the chopsticks to open the lid and lock the valve on the lid and press it down hard to press it into place, and then rotate it in the direction of opening to the position of opening the lid to open it.

The electric pressure cooker is an upgraded product of the traditional pressure cooker and the rice cooker, which combines the advantages of the pressure cooker and the rice cooker, completely solves the safety problem of the pressure cooker, and relieves the safety hazards that have plagued consumers for many years with ordinary pressure cookers; Its thermal efficiency is greater than 80%, saving time and electricity.

According to the operation mode of the electric pressure cooker, it can be divided into two types: traditional mechanical operation and new microcomputer operation.

Manual operation. Mechanical operation, also known as manual operation, is the traditional electric pressure cooker operation mode, mainly through buttons, switches and other button methods to operate various functions of the electric pressure cooker.

Advantages: There are no complicated functions, simple operation, suitable for proficient cooks.

Computer operation. Microcomputer operation is a new type of electric pressure cooker operation mode, in which a microcomputer chip is implanted in the electric pressure cooker, which can automatically regulate the whole process of the electric pressure cooker, and there is no need for manual operation in the working process.

Advantages: You can make an appointment in advance, when the microcomputer electric pressure cooker is working, the microcomputer chip is operated throughout the whole process, and no one needs to be present.

Disadvantages: more functions, more complicated operation, not suitable for the elderly.

Pressure cookers are generally divided into three types: aluminum, aluminum alloy and stainless steel, each with its own characteristics

1. Aluminum is light in weight, fast in heat transfer, cheap, and has a service life of more than 20 years, but the use of it undoubtedly increases the absorption of aluminum elements, and long-term use of it is not good for health;

2. Aluminum alloy products are better than pure aluminum products, durable and strong;

3. Although the stainless steel pressure cooker is more expensive, it is heat-resistant, beautiful, not easy to react with acid, alkali and salt in food, and has the longest service life, up to more than 30 years.

There are many reasons why Midea's electric pressure cooker won't turn on:

1. If it is because the lid is not covered properly, please follow the following methods to solve it:

1. Use chopsticks to dial the exhaust valve to the exhaust state, and wait until the float valve falls down to ensure that the gas inside the pot is completely discharged. <>

2. Hold the handle of the lid in your hand, place it flat to the limiting edge, and then rotate the lid counterclockwise to the buckle position.

3. Rotate the lid in the direction of opening to the open position to open it.

Second, there is still pressure in the pot, and the exhaust valve hole is blocked, you can wait for the pot to cool down completely before trying to open it.

3. The lid of the pot may be stuck by the food cooked inside. Press and hold the open lid button, find a thin piece of metal, and gently pry the lid open.

Fourth, when the pot is cooking, the sealing place is stuck by the porridge, so it cannot be opened. Continue to heat the pot and let the pan work normally for 10 minutes, and then try to open it after the gas inside the bag expands.

Two cases, 1If you don't have a complete decompression, just be patient and wait for it to be completely decompressed.

2.If you still can't open it after relieving the pressure, first close the lid in place in the direction of closing, and then use the chopsticks to open the lid and lock the valve to press down and press it into place, and then rotate it in the direction of opening to the position of opening the lid to open it.

3.If the above two situations cannot be opened, you can flip the electric pressure cooker upside down, pat the bottom of the pot twice, and then try to open it.

After making sure that there is no pressure in the pot, first close the lid firmly in the direction of closing, and then use the chopsticks to open the lid and lock the valve and press down firmly to press it into place. Then rotate it in the direction of opening to the open position to open the lid and it will be opened.

After the pressure becomes smaller, open it according to the insurance, if it is within the warranty period, replace the goods.

When it cools, slowly shake it from side to side to see if it can be opened.

1. It may be that the Midea electric pressure cooker does not have complete pressure relief, the protection device of the electric pressure cooker will be activated, and the lid of the electric pressure cooker will not be opened. In this case, the electric pressure cooker can be turned on after depressurizing itself.

2. If the electronic control components of Midea's electric pressure cooker fail, you can only go to the after-sales maintenance point for maintenance or ask professional maintenance personnel to deal with it.

3. It may be that the electric pressure cooker has been used for too long, and the electric pressure cooker has not been cleaned, but the pressure has dropped to normal atmospheric pressure.

But the safety valve. Due to the presence of oil, food residue and oxide between the lid and the pot, the resistance between the two increases, and it cannot naturally descend to a position that can make the lid open normally. If this is the reason, poke the safety valve with the tip of the chopsticks to open it, but pay attention to keep the safety distance, and clean up the debris between the safety valve and the lid in time after opening and using, so as not to malfunction next time.

4. It may be that the electric pressure cooker of Midea suddenly loses power when it is used, and the check valve when the power is off.

If this is the case, you can make sure to press the check valve with one chopstick after the pressure is relieved, so that the check valve falls clockwise.

Open the lid.

Midea electric pressure cooker lid can't open the solution:

1. If you don't have a complete pressure relief, just wait patiently for a complete pressure relief.

2. The electric pressure cooker has been used for a long time, although the pressure has dropped to normal atmospheric pressure, but the safety valve can not naturally fall to the position where the lid can be opened normally due to the increase in resistance between the safety valve and the lid (oil, food residues and oxides).

3. Rinse with cold water until it can be opened.

4. Find the (on-off) position on the lid with one hand, grab the other side with one hand, and slowly exert force along the direction of opening, and then exert more force, it will open without damaging the pressure cooker.

There are several situations in which the Midea electric pressure cooker can't open the lid:

1. What should I do if the lid of the Midea electric pressure cooker cannot be opened, and the power suddenly fails when using the Midea electric pressure cooker to cook porridge, and then the lid of the pot cannot be opened? It may be that the check valve did not fall when the power was off, preventing the lid from opening, if this is the case, you can make sure to press the check valve with a chopstick after the pressure is relieved, so that the check valve falls and open the lid clockwise.

2. The newly bought Supor computerized electric pressure cooker, when steaming the chicken cake this morning, after the pressure is discharged, the lid and the inner tank are connected, and they can't be opened! What's going on? You can refer to question 1 to check whether the check valve has fallen; If the check valve has fallen and the lid still can't be opened, it may be that the wrong mouth is not in place, and the leather pad is sticky.

You can use the chopsticks to press down firmly on the locking valve on the lid, and when it is in place, the lid can be opened.

2.You can use cold water until you can open it.

3.Grasp the switch on the lid with one hand, hold the other side with the other, follow the direction of opening, slowly, it will open, and the pressure cooker will not be damaged.

Do you have any more questions?

Question: This new pot can't find the pressure valve in**.

Do you have any more questions?

Life hacks: What to do if the lid of the pressure cooker can't be opened.

If the porridge is still pressurized, there is a hole in it, and there is a float in it that opens when you press it, or wait for the temperature to cool down.

Midea's Gaoyu rice cooker is broken, where to fix it.

How did you open it later, I can't open it like this.

Summary. Hello, dear, very happy for your question, the Midea electromagnetic pressure cooker power-on ID is not covered, help you inquire, dear, that's because you think it's covered, but it's not actually covered, some pressure cookers are like this, you need to twist the lid after you cover it, and after screwing it, the cover is completely tight. I hope mine can help you, I wish you good health and a happy mood!

Hello, dear, very happy for your question, the Midea electromagnetic pressure cooker power-on ID is not covered, help you inquire, dear, that's because you think it's covered, but it's not actually covered, some pressure cookers are like this, you need to twist the lid after you cover it, and after screwing it, the cover is completely tight. I hope mine can help you, I wish you good health and a happy mood!

Dear, the lid of the electric pressure cooker of Midea shows that it is not covered properly: 1. It may be reversed, solution: place it correctly.

2. It may not be flattened, solution: re-flatten, and then close. 3. It may be reversed, turning in a counterclockwise direction.

4. It may be that the safety column has not fallen, and the solution: gently press the safety column down with chopsticks, take out the chopsticks, and then operate according to the above method. Hope it helps!

What should I do if the Midea electric pressure cooker shows that the lid is not in place and cannot be used? Hello dear! 2 The lid of the Midea electric pressure cooker can't be covered:

1. It may be reversed, solution: put the brother in the trap correctly. 2. It may not be flattened, solution:

Re-lay and close again. 3. It may be reversed, turning in a counterclockwise direction. 4. It may be that the safety column did not fall, and the solution to the rubber lifting method:

Use chopsticks to gently press down the pillar of Baoxian Xiaonian, take out the chopsticks, and then operate according to the above method. Hope it helps!

Abstract: Midea's electric pressure cooker can not open the lid can be dealt with in the following ways:

1. If the lid of the pot cannot be opened, it may not be completely relieved, so you can wait patiently for the pressure to be completely relieved before opening.

2. The electric pressure cooker has been used for a long time, and the pressure has dropped to normal atmospheric pressure, but the safety valve cannot naturally drop to the position that can make the lid open normally due to the increase in resistance between the safety valve and the lid.

3. You can use cold water to flush until it can be opened.

4. You can also find the on-off position on the lid of the pot with one hand, grab the other side with one hand, and slowly exert force along the direction of the opening, and it will open.

What should I do if the Midea electric pressure cooker can't open the lid?

Hello, I am helping you to inquire about the relevant information and will reply to you immediately.

If the lid of the Midea electric pressure cooker cannot be opened, it can be dealt with in the following ways: 1. If the lid cannot be opened, it may not be completely depressurized, and you can wait patiently for the complete depressurization to be opened. 2. The electric pressure cooker has been used for a long time, and the pressure has dropped to normal atmospheric pressure, but the safety valve cannot naturally drop to the position that can make the lid open normally due to the increase in resistance between the safety valve and the lid.

3. You can use cold water to flush until it can be opened. 4. You can also find the on-off position on the lid of the pot with one hand, grab the other side with one hand, and slowly exert force along the direction of the opening, and it will open.

It is to cook red beans in a pot, because the amount of beans is large for a long time, and then it can't be opened. What is the reason? Is there any way to do it?

If the density of the gas in the pot increases, the lid will be sucked in, so it cannot be removed.